This decal was applied to both J40 and J50 series Land Cruiser, and denoted the licenced use of Bendix tehcnology by Toyota.

Complete your Land Cruiser Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

All colours available from 1969 to 1971.

Complete your early Toyota restoration project in complete style!

These AMI Lustrelife paint colour decals were fitted in the engine bay of all early model Toyota's built during 1969 to 1971. These were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Our decals are correct in every detail including artwork, colour names and paint codes.

Colours used by AMI and included in our range of decals to chose from are:

• Apple
• Bronze Metallic
• Caribbean
• Cirrus Grey
• Columbine Blue
• Cornflower
• Cream
• Deep Russet
• Desert Beige
• Havana Gold
• Hayman Blue
• Marina Turquoise
• Midnight Blue
• Mocca
• Peak White
• Signal Red
• Sirius White
• Targa Pearl Metallic
• White 
• Willow

Often many cars have lost this decal when an owner has removed it for painting the original decal has been torn or lost.

If you cannot find your colour in the decals with have listed please contact us at Toyota Heritage.

We can also assist in identifying the colour of your car if you are unsure which decal to purchase.

These decals were also fitted to Rambler (Matador, Rebel, Hornet, American etc), Triumph (Herald, 2000, 2000PI, 2500TC etc) and AMC (Javelin, AMX etc). 

This decal was applied to both J40 and J50 series Land Cruiser, and denoted the servicing requirements for the air filter cartridge.

Applied to the arm of the air cleaner assembly, these decals are correct in every detail and finish your restoration to concourse levels!

Fitted at the very top of the arm, this decal is most visible immediately when the bonnet (hood) is opened. Decal measures 125mm x 32mm.

Often the original decal may have been removed or simply fallen off. 

Available only from Toyota Heritage.

We ship worldwide every week - no problems for international buyers.

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate.

These 'TEQ' Toyota Motor Corp Build Plates were fitted in the engine bay of all early model Toyota's built during the early 1960's. Generally this plate was used up till December 1964 but may vary in different countries. Please check with us if you are unsure.

We have seen these on Crown, Corona, Publica, Stout, Tiara and Landcruiser.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Available in USDM and JDM / Rest of World versions. Suits KE16 and KE18 variants built from 1966 to 1970.

The red-amber-clear units are suited to the Japanese Domestic Market ('JDM') and Australian Market which included New Zealand and other South West Pacific nations (eg PNG).

The red-clear-red units are suited to the USA Domestic Market ('USDM') and were also used throughout north America in Canada and Mexico.

Corollas wagons delivered to Europe and Latin America may use either version, depending on country and year.

Complete your early model Corolla wagon project in style - whether its a retro-ride, drift machine, restoration project or street registered!

These lenses have been produced in Australia to highest quality and are faithful reproduction items. It comes in two pieces; One section is the indicator (amber or red) with the stop light (red) and the clear reverse ('back-up') is a separate piece.

Shipping worldwide weekly - no problems for overseas buyers

Reproduction tail light lenses for your first generation E10 series Toyota Corolla.

Suited to all Toyota Corolla KE10, KE10SL  and KE11 built between 1966 to 1968 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number L2377 (indicator), L2186 (reflector) and L2376 (stop and tail light).

These lenses were fitted to the rear panel of the two door and four door sedan varaints of the Toyota Corolla and are the same on SL and non SL variants.

The red-amber-clear units are suited to the Japanese Domestic Market ('JDM') and Australian Market which included New Zealand and other South West Pacific nations (eg PNG).

The red-clear-red units are suited to the USA Domestic Market ('USDM') and were also used throughout north America in Canada and Mexico.

Sprinters delivered to Europe and Latin America may use either version, depending on country and year.

The pack contains six lenses and two rubbers for the refelctors. Choose from JDM or USDM versions of the tail light lenses by using the drop-down menu.

Complete your 'classic' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction tail light lenses for your first generation E10 series Toyota Corolla Sprinter 

Suited to all Toyota Corolla Sprinters KE15, KE15SL, KE17 and KE17SL built between 1968 to 1970 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number 12-9L (left side) and 12-9R (right side)

These lenses were fitted to the rear panel of the coupe Toyota Corolla known as Sprinter and are the same on both the SL and non SL variants.

The red-amber-clear units are suited to the Japanese Domestic Market ('JDM') and Australian Market which included New Zealand and other South West Pacific nations (eg PNG).

Complete your 'classic' Toyota Corolla Sprinter project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction tail light lenses for your first generation E10 series Toyota Corolla Sprinter 

Suited to all Toyota Corolla Sprinters KE15, KE15SL, KE17 and KE17SL built between 1968 to 1970 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number 12-9L (left side) and 12-9R (right side)

These lenses were fitted to the rear panel of the coupe Toyota Corolla known as Sprinter and are the same on both the SL and non SL variants.

The red-clear-red units are suited to the USA Domestic Market ('USDM') and were also used throughout north America in Canada and Mexico. Some early build cars from 1967 in other markets may have also been delivered with this version of the tail lamp lens too.

Sprinters delivered to Europe and Latin America may use either version, depending on country and year.

Complete your 'classic' Toyota Corolla Sprinter project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.