Spare parts suitable for Toyota Land Cruiser J40 Series

This decal was applied to both J40 and J50 series Land Cruiser, and denoted the licenced use of Bendix tehcnology by Toyota.

Complete your Land Cruiser Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

This decal was applied to both J40 and J50 series Land Cruiser, and denoted the servicing requirements for the air filter cartridge.

Applied to the arm of the air cleaner assembly, these decals are correct in every detail and finish your restoration to concourse levels!

Fitted at the very top of the arm, this decal is most visible immediately when the bonnet (hood) is opened. Decal measures 125mm x 32mm.

Often the original decal may have been removed or simply fallen off. 

Available only from Toyota Heritage.

We ship worldwide every week - no problems for international buyers.

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

• KE10, KE11, KE15, KE16, KE17 and KE18
• KE20, KE25, TE21, TE25, TE27 and TE26
• KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
• TE72
• AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

• FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

• KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

• TA10
• KA67
• ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

• TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
• TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

• All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate for vehicles with original delivery in Japan.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the mid and late 1960's and up to the year of 1970. Generally these were used up till December 1970, but this may vary on some models and for some cars sold in January 1971.

We have seen these on Crown, Corolla, Corona, Stout, Publica, and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Reproduction front parker light lenses in clear to suit your J40 J50 series Toyota Land Cruiser and N10 series Toyota Hilux.

These lenses were fitted to the fender (mudguard) mounted lamps and are faithful reproductions made in Australia to the highest quality and replace original Koito original part 210-33453.

These lenses are suited to the following models:

Toyota Land Cruiser - built between 1968 and 1974

• FJ40
• FJ45
• HJ45
• BJ40
• BJ43
  FJ55

Toyota Hilux - built between 1968 and 1972

• RN10
• RN15 

Koromo Heritage are the only supplier globally of this lens in clear.

Also available in amber - please see our separate listing in our store for the amber version.

Sold as a pair they will complete your J40 or J50 series Toyota Land Cruiser or N10 series Toyota Hilux project in style - whether its a retro-ride daily driver, restoration project, shop truck or offroad escape machine!

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction tail light lenses suitable for J30, J40 and J50 series Toyota Land Cruiser as well as S30 series Crown.

These lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number L1804L (left side) and L1804R (right side).

These lenses are suited to the following models:

Toyota Land Cruiser

• FJ35V and FJ35LV
• FJ45V and FJ45LV
• FJ55 - 1967 built only

 Toyopet Crown Masterline

• RS20 wagon
• RS30 wagon and pick-up 

These lenses were fitted to the rear quarter panel ends beside the tail gate of the Toyota Land Cruisers and Toyopet Crown Masterlines listed above.

These lenses are extremely hard to find as New Old Stock ('NOS') and these reproductions will complete your project in style - whether its a retro-ride, daily driver, restoration project, shop truck or even a serious offroader!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your early Toyota restoration project!

These seals were fitted between the inside of the door frame and the window regulator/winder mechanism of Toyota's built during the 1960's and early 1970's. We have seen these on Crown, Corolla, Corona, Mark ii and Landcruiser just to name a few models.

These stop vibration and 'wobble' of your window winder handle and help eliminate rattles.

Our reproduction part is exacting in every detail.

Complete your 'old school' Toyota project with this reproduction factory six row fuse box.

Complete with a cover that displays correct fuse allocation and TEQ logo, this suits all early model Toyota vehicles including:

• Landcruiser early BJ, HJ and FJ
• Crown MS40 RS40 series
• Corona RT40 series
• Publica
• Stout

This is high quality replacement product that will help your car's electrical system come back to life.

Bolts straight into most models and overcomes problems with broken fuse housings.

Worldwide shipping weekly - no problems for overseas buyers.

Reproduction front parker light lenses in amber to suit your J40 J50 series Toyota Land Cruiser and N10 series Toyota Hilux.

These lenses were fitted to the fender (mudguard) mounted lamps and are faithful reproductions made in Australia to the highest quality and replace original Koito original part 210-33453.

These lenses are suited to the following models:

Toyota Land Cruiser - built between 1968 and 1974

• FJ40
• FJ45
• HJ45
• BJ40
• BJ43
  FJ55

Toyota Hilux - built between 1968 and 1972

• RN10
• RN15 

Koromo Heritage are the only supplier globally of this lens in clear.

Also available in clear - please see our separate listing in our store for the clear version.

Sold as a pair they will complete your J40 or J50 series Toyota Land Cruiser or N10 series Toyota Hilux project in style - whether its a retro-ride daily driver, restoration project, shop truck or offroad escape machine!

Shipping worldwide weekly - no problems for overseas buyers.

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Complete your early Toyota restoration project in style with a pair of reproduction lenses to suit your early style factory Toyota Motor Corp auxiliary ('driving') lights.

Replaces original Koito part number L2589.

Mostly fitted to Toyota Stout and Toyota Land Cruiser these were also fitted as factory auxiliary driving lights on Crown, Corolla, Corona, Mark ii, and Hilux just to name a few other models.

You may find that your original lense is missing or cracked. These wonderful reproduction lenses are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

• CV10, CV11, SV10, SV11, SV12
• MCV20, MCV21, SXV20, SXV23, SXV25
• MCV36, ACV36
• ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

• TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
• AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
• AT160, ST160, ST161, ST162, ST163, ST165
• AT180, ST182, ST183, ST184, ST185
• AT200, ST202, ST203, ST204, ST205
• ZZT230 and ZZT231 

Toyota Corona

• RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
• RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
• AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
• T160, T170, T190 series
• T200, T210, T220 series

Toyota Cressida

• RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
• X60, X70 and X80 series

Toyota Carina

• A10, A40, A60 series
• T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

• KE30, KE35, KE38, KE55, TE55, TE37
• KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
•  AE80, EE80, AE81 AE85, AE82, AE86, CE80
• AE90, AE92, AE93, AE94, AE95, AE96
• AE101, AE111, AE112
• ZRE120
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

• RN10, RN15
• RN20, RN25
• RN30, RN35, RN40, RN45
• RN50, RN60, YN60, LN60, RN70, YN70, LN70
• N80, N90, N100, N110 series
• N120 series
• N130 series
• N140 series

Toyota Land Cruiser 

• FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
• FJ55, FJ55G, FJ55V, FJ56
• FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
• FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
• HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

• J90, J120 and J150 series

Toyota Starlet

• KP60, KP61, KP62
• P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

This decal was applied to both J40 and J50 series Land Cruiser, and denoted the licenced use of ASCO tehcnology by Toyota.

Complete your Land Cruiser Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

Reproduction interior vent covers to suit J40 and J50 series Toyota Land Cruiser as well as first and second generation Toyota Hilux 

Available in black or silver - simply use the drop down menu to select. Replacing original part number 62931-89102 these louvres were the interior trim piece to the roof ventilation system and were fitted to the following models and installed as follows:

J40 series Toyota Land Cruiser - vertically and fitted to the B-pillar of pick up model FJ45 Toyota Land Cruiser and in the rear cargo area of FJ40 and BJ40 Toyota Land Cruiser.

J50 series Toyota Land Cruiser - horizontally and fitted to the rear cargo area of FJ55, FJ56 and FJ55V Toyota Land Cruiser.

N10 series Hilux - vertically and fitted to the B-pillar of pick up models RN10 and RN15 Toyota Hilux

N20 series Hilux - vertically and fitted to the B-pillar of pick up models RN20, RN25 and early versions of RN22 Toyota Hilux

Complete your 'old school' Toyota Land Cruiser or Toyota Hilux project in style - whether its a retro-ride, daily driver, restoration project or shop truck!

These louvres have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the mid and late 1960's and early 1970's. Generally these were used up till December 1974, but this may vary in some countries.

We have seen these on Crown, Corolla, Corona, Mark ii, Stout, Publica, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate.

These 'TEQ' Toyota Motor Corp Build Plates were fitted in the engine bay of all early model Toyota's built during the early 1960's. Generally this plate was used up till December 1964 but may vary in different countries. Please check with us if you are unsure.

We have seen these on Crown, Corona, Publica, Stout, Tiara and Landcruiser.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

This decal was applied to all Japanese built Toyota models throughout the late 1960's to 1980.

This included modesl such as Land Cruiser (FJ40, FJ45, FJ55 etc), Hilux (RN15, RN25 etc), Crown (MS55, MS60, MS70, MS80 etc), Celica (A20 series) and Corolla (E20 and E30 series).

Complete your classic Toyota Restoration in style with this decal that is applied to the top face of the radiator adjacent to the radiator cap.

Fitted at the very top of the radiator, this decal is most visible immediately when the bonnet (hood) is opened and provides that finishing touch to a resto.

Often the original decal may have been removed when the radiator was reconditioned, replaced or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.