Spare parts suitable for Toyota Land Cruiser J40 Series

NOS and reproduction spare parts suitable for all J40 series Toyota Land Cruiser models built from 1960 to 1984

ASCO Brake Booster decal suitable for various Toyota models

This decal was applied to Toyota vehicles through out the 1970's and early 1980's, and denoted the licenced use of ASCO disc brake technology by Toyota.

Complete your Toyota Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

F 2F 3F Engine 9mm Ignition Lead Kit suitable for J40 FJ55 J60 J70 Toyota Land Cruiser (TH9617)

Genuine Eagle brand 9mm ignition leads to suit your Toyota Land Cruiser fitted with an F, 2F or 3F engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the F, 2F and 3F engines.

Suits 3.9 F OHV Land Cruiser models as follows:

  • FJ40 - 1965 to 1974
  • FJ55 - 1965 to 1974

Suits 4.2L 2F OHV Land Cruiser models as follows:

  • FJ40 and FJ45 - 1972 to 1984
  • FJ55 - 1972 to 1980
  • FJ60 - 1980 to 1988

 Suits 4.0L 3F OHV Land Cruiser models as follows:

  • FJ62 - 1980 to 1988
  • FJ70, FJ73 and FJ75 -1985 to 1990

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHV motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$89.50

B Engine Build Plate suitable for Toyota Land Cruiser Coaster Dyna

Complete your early Toyota restoration project in style with a reproduction B engine build plate for your Toyota Land Cruiser, Toyota Dyna or Toyota Coaster.

These 'B' engine Build Plates were fitted in the engine bay of Toyota Landcruiser BJ42, BJ45 and BJ46 built up until 1984 (start year can vary in each geographical market). and were also fitted to other models such as Toyota Dyna BU10, BU15, BU20 and BU30 as well as Toyota Coaster.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail.

The pricing includes having your car's data applied to the plate before we ship it to you.

Select B, 2B or BJ engine build plate using the drop down menu.

Shipping worldwide weekly - no problems for overseas buyers.

$80.00
* engine model:

Fender Lamp Lenses (L1432 Clear Amber) suitable for Toyota Land Cruiser J30 and J40 series 1963 to 1968

Reproduction fender mounted clearance lamp lenses for your J30 series or J40 series Toyota Land Cruiser 

Suited to all Toyota Land Cruiser early build FJ35V, FJ35LV, FJ40 and FJ45 built between 1963 to 1968 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number L1432.

These lenses were fitted to the fender (mud guard) mounted clearance lamp of the LWB and SWB variants of the Toyota Land Cruiser and affix using three screws.

Available in clear or amber. Select the lens coulour you need from the drop-down menu.

Complete your 'old school' Toyota Land Cruiser project in style - whether its a retro-ride, work horse, shop truck or detailed restoration!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$90.00
* lense colour options:

Tail Lamp Stop Light Lenses suitable for Toyota Land Cruiser J30 J40 series

Sold as a pair (you get two of these)

Complete your Landcruiser restoration project in style!

These faithful and high calibre reproduction units are made using the highest standards in tooling and moldings.

Replaces Koito 212-33948

NOS are no longer available for these units.

This lense was used extensively for Landcruisers built between 1958 to 1968.

Worlwide shipping weekly - no problems for overseas buyers

$70.00
NOTE! This is a Non Stock Item

Door Card Trim Panel Clips Pack suitable for various Toyota models (TH0176)

Door card fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Supra, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door.

These are a push in clip that have a fit to a 9mm hole and have a T1 13mm head diameter with a stem length of 14mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica 

  • AA63, GA61, RA60, RA61, RA63, RA64, RA65, SA60, SA63, TA60, TA61, TA63, TA64
  • AT160, ST160, ST161, ST162, ST163, ST165 
  • AT180, ST182, ST183, ST184 and ST185

Toyota Corolla

  • KE30, KE35, KE36, KE38, TE31, TE37, TE38
  • TE47
  • KE50, KE55, TE51,
  • AE70, AE71, CE70, CE71, CE72, KE70, KE71, KE72, KE73, KE74, TE70, TE71, TE72, TE73, TE74
  • AE80, AE81, AE82, AE85, AE86, CE80, EE80

 Toyota Corona

  • AT140, AT141, CT140, CT141, CT147, KT147, RT141, ST140, TT142, TT147, YT140

 Toyota Hilux

  • LN50, LN51, LN55, LN56, LN57, RN50, RN55, RN58, YN50, YN51, YN52, YN55, YN56, YN57, YN58
    LN60, LN61, LN65, RN60, RN61, RN66, RN67, VZN61, VZN66, YN60, YN61G, YN61V, YN62, YN63, YN65, YN67
    RN70, RN75

 Toyota Supra

  • MA61, MA63

Toyota Land Cruiser 

  • BJ40, BJ41, BJ42, BJ44, BJ45, BJ46, FJ40, FJ45, HJ47
  • BJ60, BJ61, FJ60, FJ61, FJ62, FJ62G, FJ62V, HJ60, HJ61
  • BJ70, BJ71, BJ73, BJ74, BJ75, FJ70, FJ73, FJ75, HJ75, LJ75, LJ70, LJ71, LJ73, RJ70, RJ73 

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Tail Lamp Lenses (Red L1432) suitable for Toyota Land Cruiser J30 and J40 1963 to 1968

Reproduction tail lamp lenses for your J30 series or J40 series Toyota Land Cruiser

Suited to all Toyota Land Cruiser early build FJ35V, FJ35LV, FJ40 and FJ45 built between 1963 to 1968 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number L1432.

These lenses were fitted to the rear bumper mounted tail lamps of the LWB and SWB variants of the Toyota Land Cruiser and affix using three screws.

Complete your 'old school' Toyota Land Cruiser project in style - whether its a retro-ride, work horse, shop truck or detailed restoration!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$90.00
2 In Stock

Fender Lamp Grommet suitable for Toyota Land Cruiser J25, J35 and J40 series

Reproduction pair of grommets for fender mounted indicator parker lenses to suit your J40 series Toyota Land Cruiser.

Suited to FJ25, FJ35V and FJ35LV built between 1958 and 1963 and all FJ40, FJ45-B, FJ45LV and FJ45V Toyota Land Cruiser built between 1963 to 1968 (markets outside the USA-Canada they were used from 1966 to 1968) these grommets have been made in Australia to the highest quality and replace Koito original product number 33629

These grommets were fitted to mid to these 1960's J40 series Toyota Land Cruisers with parker lamps located on the front fenders.

Complete your 'old school' Toyota Land Cruiser project in style - whether its a retro-ride, work horse, shop truck or detailed restoration!

These grommets have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$60.00

Front Bib Parker Lenses in clear suitable for Toyota Land Cruiser 1958 - 1968 J40 and J30 series

Reproduction front bib parker light lenses in clear to suit your J40 series or J30 series Toyota Land Cruiser.

Suited to all Toyota Land Cruisers such as FJ40, FJ45, FJ45V, FJ45LV and FJ35 built between 1958 to 1968 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number is 212-33948.

Available in either amber or clear these lenses were are fitted to the front bib  of all variants of the Toyota Land Cruiser with the front parker lights mounted beside the grille.

Complete your 'old school' or classic Toyota Land Cruiser project in style - whether its a retro-ride, daily driver, shop truck or even a detailed restoration project!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item and are no longer available as NOS or OEM. 

Shipping worldwide weekly - no problems for overseas buyers.

 

 

 

$85.00
NOTE! This is a Non Stock Item

Under-hood Decal Set suitable for Toyota Land Cruiser BJ42 1981 to 1984

Complete your BJ42 Landcruiser Restoration in style with this under-hood decal set.

Contains the following decals:

  • Injection pump caution (yellow decal)
    EDIC drive
    Australian Design Reg 'ADR' compliance (silver)
    Fuel separator (blue)
    Starter motor; and
    Alternator

Decal pack may also be used for

  • North America / USA models (ADR decal n/a)
    Other FJ and HJ (EDIC decal n/a)
$10.00
NOTE! This is a Non Stock Item

Interior Lamp Dome Lens (45mm) suitable for Toyota Land Cruiser J40 series

Interior Dome light for early model Toyota Landcruisers.

They measure approximately 45mm wide x 55mm long and are produced in an original opaque plastic.

These items are no longer available in most countries as NOS items.

They are a faithful high quality reproduction item using the highest standards in tooling and molding techniques.

World wide shipping weekly - no problems for overseas buyers.

$43.00
3 In Stock

Fender Lamp Lenses (Clear L1047) suitable for Toyota Land Cruiser J25, J35 and J40 series

Reproduction pair of lenses for fender mounted indicator parker lenses to suit your J20, J30 or J40 series Toyota Land Cruiser.

Suited to FJ25, FJ35V and FJ35LV built between 1958 and 1963 and all FJ40, FJ45-B, FJ45LV and FJ45V Toyota Land Cruiser built between 1963 to 1968 (markets outside the USA-Canada they were used from 1966 to 1968) these lenses have been made in Australia to the highest quality and replace Koito original product number L1047

These lenses are the screw in type and were fitted to early to mid 1960's J40 series Toyota Land Cruisers as well as some of the J20 and J30 series Toyota Land Cruisers with parker lamps located on the front fenders.

Complete your 'old school' Toyota Land Cruiser project in style - whether its a retro-ride, work horse, shop truck or detailed restoration!

These grommets have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$115.00
NOTE! This is a Non Stock Item

Front Bib Parker Lenses in Amber suitable for Toyota Land Cruiser 1958 - 1968 J40 and J30 series (2)

Reproduction front bib parker light lenses in amber to suit your J40 series or J30 series Toyota Land Cruiser.

Suited to all Toyota Land Cruisers such as FJ40, FJ45, FJ45V, FJ45LV and FJ35 built between 1958 to 1968 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito part number is 212-33948.

Available in either amber or clear these lenses were are fitted to the front bib  of all variants of the Toyota Land Cruiser with the front parker lights mounted beside the grille.

Complete your 'old school' or classic Toyota Land Cruiser project in style - whether its a retro-ride, daily driver, shop truck or even a detailed restoration project!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item and are no longer available as NOS or OEM. 

Shipping worldwide weekly - no problems for overseas buyers.

 

 

 

$85.00

Tail Lamp Lenses suitable for Toyota Land Cruiser J40 series and Toyota Stout K40 K100 series

Reproduction S8899 tail light lenses suitable for J40 series Toyota Land Cruiser as well as K40 K100 series Toyota Stout.

These lenses are faithful reproductions made in Australia to the highest quality and replace original Everwing part number S8899.

These lenses are suited to the following models :

Toyota Land Cruiser

  • FJ45 ute with a tub ('style side') back body
  • FJ40 

Toyota Stout with a tub ('style side') back body

  • RK40, RK41, RK43, RK45, RK47
    RK100 and RK101.

Complete your 'old school' Toyota Landcruiser or Toyota Stout project in style. Increasingly hard to find as NOS these reproduction lenses look great fitted to vintage restoration projects, well as retro rides or a 'shop truck'.

Shipping worldwide weekly - no problems for overseas buyers.

$145.00
NOTE! This is a Non Stock Item

Interior Lamp Dome Lens (70mm) suitable for Toyota Land Cruiser J40 series and Toyota Corona RT46

Reproduction interior dome suitable for J40 series Toyota Land Cruiser and T40 T50 series Toyota Corona.

These interior domes have a length of approximately 70mm (4¾in), are faithful reproductions made in Australia to the highest quality and are suited to the following models:

Toyota Land Cruiser

  • J45 ute

Toyota Corona third generation

  • RT46 ute, pick-up or bakkie (1964 to 1970)

These domes are no longer available in most countries as NOS items.

They are a faithful high quality reproduction item using the highest standards in tooling and molding techniques.

Worldwide shipping weekly - no problems for overseas buyers

$43.00
NOTE! This is a Non Stock Item

Fender lamp lenses (Red L1047) suitable for Toyota Land Cruiser J25, J35 and J40 series

Reproduction pair of lenses for fender mounted indicator parker lenses to suit your J20, J30 or J40 series Toyota Land Cruiser.

Suited to FJ25, FJ35V and FJ35LV built between 1958 and 1963 and all FJ40, FJ45-B, FJ45LV and FJ45V Toyota Land Cruiser built between 1963 to 1968 (markets outside the USA-Canada they were used from 1966 to 1968) these lenses have been made in Australia to the highest quality and replace Koito original product number L1047

These lenses are the screw in type and were fitted to early to mid 1960's J40 series Toyota Land Cruisers as well as some of the J20 and J30 series Toyota Land Cruisers with parker lamps located on the front fenders.

Complete your 'old school' Toyota Land Cruiser project in style - whether its a retro-ride, work horse, shop truck or detailed restoration!

These grommets have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$115.00
NOTE! This is a Non Stock Item

TEQ Build Plate Early Models to 1974 Japan Delivery

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate for vehicles with original delivery in Japan.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the period from February 1970 to december 1974. Generally these were used up till December 1974, but this may vary on some models and for some cars sold in January 1975.

We have seen these on Crown, Corolla, Corona, Stout, Publica, and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

H Engine Build Plate suitable for Toyota Land Cruiser Coaster Dyna

Complete your early Toyota restoration project in style with a reproduction H engine build plate for your Toyota Land Cruiser, Toyota Dyna or Toyota Coaster.

These 'H' engine Build Plates were fitted in the engine bay of Toyota Landcruiser HJ45, HJ47 and HJ60 built up to 1985 (start year can vary in each geographical market). and were also fitted to other models such as Toyota Dyna HU10 and Toyota Coaster.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

Select H or 2H engine or HJ45 build plate using the drop down menu.

We ship globally to all countries weekly.

$80.00
* engine model:

Interior Lamp Dome Lens (120mm) suitable for Toyota Land Cruiser J45 series

Interior Dome light for early model Toyota Landcruisers 1964-1967 pickup cabs. Models include FJ45P-B, FJ45LP-B as well as the FJ45P.

They measure apx 120mm long and are produced in an original opaque plastic.

This reproduction parts replaces Toyota Part No. 81243-95210 that was fitted within complete assembly Part No. 81240-95210 (12 volt, and used an 8 watt festoon bulb).

These items are no longer available in most countries as NOS items.

They are a faithful high quality reproduction item using the highest standards in tooling and molding techniques.

$43.00

F Engine Build Plate suitable for Toyota Land Cruiser Bus and Truck

Complete your early Toyota restoration project in style with a reproduction F engine build plate for your Toyota Land Cruiser, Toyota Dyna or Toyota Coaster.

These 'F' engine Build Plates were fitted in the engine bay of Toyota Landcruiser FJ40, FJ45, FJ47 and FJ60 built up to 1988 (start year can vary in each geographical market) and were also fitted to other models such as Toyota Bus FB and Toyota Truck FA, FC, FQ15, FX and FZ.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail.

The pricing includes having your car's data applied to the plate before we ship it to you.

Select F or 2F engine build plate using the drop down menu.

We ship globally to all countries weekly.

$80.00
* engine model: