ZN6 Series 86

Spare parts for ZN6 Series Toyota 86

Toyota 86 ZN6 Series Front and Rear Sway Bar Kit

Improve handling and performance of your first generation ZN6 series Toyota 86 (GT86) with a custom front and rear Sway Bar just like those used in the Toyota 86 Racing Series.

Toyota Heritage's sway bars are Australian made, two-way adjustable (front) and three-way adjustable (rear) and are powder coated to the highest standards.

The standard size front sway bar we offer for the ZN6 Series Toyota 86 (GT86) is 20mm finished in red powder coat. Ideal for street and track with increased torsional stiffness over factory sized bars.

The standard size rear sway bar we offer for the ZN6 Series Toyota 86 (GT86) is 18mm finished in red powder coat. Ideal for street and track with increased torsional stiffness over factory sized bars.

Our ZN6 Series Toyota 86 (GT86) sway bar kit comes complete with bushes, brackets, links and lateral locks.

We offer the opportunity for buyers to customise their sway bar set by selecting the size required in the drop down menu 'Sway Bar Size'.

Buyers can select their desired sway bar thickness of 20mm or 22mm for the front bar and buyers can select their desired sway bar thickness for the rear bar starting at 18mm and up to 24mm.

We ship worldwide weekly - no problems for overseas buyers.

$600.00
* Front Sway Bar Diameter:

* Rear Sway Bar Diameter:

Toyota 86 ZN6 Series Floor Mat Set LHD

Front and rear floor carpet set for your ZN6 Series Toyota 86 - left hand drive.

Suited to all LHD Toyota 86 ZN6 series built between 2012 to 2021 our carpet floor mats are patterned off the OEM factory mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are four mats included in the set and this includes the two front foot well mats and the two rear floor well mats. 

Displayed here in black with grey edge binding, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

You can also select the colour of your edge binding - simply use the drop down menu to select the colour you like.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'first gen' Toyota 86 ZN6 series project in style - whether its a daily driver, drift car or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$150.00
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Toyota 86 ZN6 Series Front Sway Bar Kit

Improve handling and performance of your first generation ZN6 series Toyota 86 (GT86) with a custom front Sway Bar.

Toyota Heritage's sway bar is Australian made, two-way adjustable and powder coated to the highest standards.

The standard size front sway bar we offer for the ZN6 Series Toyota 86 (GT86) is 20mm finished in red powder coat. Ideal for street and track with increased torsional stiffness over factory sized bars.

Our ZN6 Series Toyota 86 (GT86) front sway bar comes complete with bushes, brackets, links and lateral locks.

We offer the opportunity for buyers to customise their sway bar by selecting the size required in the drop down menu 'Sway Bar Size'.

Buyers can select their desired sway bar thickness of 20mm or 22mm (or even thicker if required).

We ship worldwide weekly - no problems for overseas buyers.

$350.00
* Front Sway Bar Diameter:

Toyota Screw Mounting Grommet Clip Pack TH0397

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, GT86, Hilux, Land Cruiser, Prado and Soarer.

These clips have a 16.8mm head diameter and fit to a 8.5mm square hole are a plastic push in trim clips used to fasten bumper covers, side members, side mouldings, radiator grilles and other plastic to metal body applications.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Corolla

  • NRE181, ZRE181, ZRE182 and ZWE182 (side member)

Toyota GT86

  • ZN6 (rear bumper)

Toyota Hilux

  • GUN112, KUN112, TGN110, TGN111 (radiator grille)
  • GGN120, GGN125, GUN122, GUN123, GUN125, GUN126, KUN122, KUN125, KUN126, LAN125, TGN120, TGN121, TGN126, TGN128 (radiator grille)
  • GGN135, GUN135, GUN136, KUN135, KUN136, TGN136, TGN138 (radiator grille)

Toyota Land Cruiser

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100 (hood [bonnet], fender [mudguard] and side moulding)

 Toyota Prado

  • GDJ150, GRJ150, KDJ150, LJ150, TRJ150 and TRJ155 (radio / dashboard)

Toyota Soarer

  • Z40 (side moulding)

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota 86 ZN6 Series Floor Mat Set RHD

Front and rear floor carpet set for your ZN6 Series Toyota 86 - right hand drive.

Suited to all RHD Toyota 86 ZN6 series built between 2012 to 2021 our carpet floor mats are patterned off the OEM factory mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are four mats included in the set and this includes the two front foot well mats and the two rear floor well mats. 

Displayed here in black with grey edge binding, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

Available with your choice of edge binding colour - use the drop down menu to select.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'first gen' Toyota 86 ZN6 series project in style - whether its a daily driver, drift car or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$150.00
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Toyota 86 ZN6 Series Rear Sway Bar Kit

Improve handling and performance of your first generation ZN6 series Toyota 86 (GT86) with a custom rear Sway Bar.

Toyota Heritage's sway bar is Australian made, three-way adjustable and powder coated to the highest standards.

The standard size rear sway bar we offer for the ZN6 Series Toyota 86 (GT86) is 18mm finished in red powder coat. Ideal for street and track with increased torsional stiffness over factory sized bars.

Our ZN6 Series Toyota 86 (GT86) rear sway bar comes complete with bushes, brackets, links and lateral locks.

We offer the opportunity for buyers to customise their sway bar by selecting the size required in the drop down menu 'Sway Bar Size'.

Buyers can select their desired sway bar thickness starting at 18mm and up to 24mm (or even thicker if required).

We ship worldwide weekly - no problems for overseas buyers.

$300.00
* Rear Sway Bar Diameter:

TMC Build Plate Models built after 1980 all markets

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00