Spare parts suitable for Toyota Supra A70 Series

Genuine Eagle brand 7mm ignition leads to suit your Toyota Supra or Toyota Soarer fitted with a 1G-GEU engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 1G-GEU engines.

Suits 2.0L 1G-GEU DOHC Supra and Soarer models as follows:

• GA70 Supra
• GZ10 Soarer
• GZ20 Soarer

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Genuine Eagle brand 7mm ignition leads to suit your Toyota Supra fitted with a 7M-GE engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 7M-GE engines.

Suits 3.0L 7M-GE DOHC 24V Supra models as follows:

• MA70 - distributor has clips on ignition lead boots

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Bonnet (hood) insulation fastener clip pack to suit various Toyota models - Celica, Supra, and Soarer

These clips are used to fasten the bonnet (hood) insulation into place.

These are a push in fastener that has a gloss black 30mm head and 15mm lenth that fits to an 8mm hole.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica 

• ST182, ST183 and ST184
• ST204 and ST205

Toyota Soarer

• GZ20

 Toyota Supra

• GA70, JZA70 and MA70

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your A70 Supra (third generation) project in style with these clips that hold down the trim beside your windscreen.

A70 Supras have one of these clips on each side where the windscreen meets the A-pillar.

OEM genuine and brand new these clips help your project along to a great finish.

A limited number only in stock.

Shipping worldwide weekly - no problems for overseas buyers.

Genuine Eagle brand 7mm ignition leads to suit your Toyota Supra or Toyota Soarer fitted with a 1G-GTEU engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 1G-GTEU engines.

Suits 2.0L 1G-GTEU DOHC 24V Supra and Soarer models as follows:

• GA70 Supra Twin Turbo
• GZ20 Soarer Turbo

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Genuine Eagle brand 7mm ignition leads to suit your Toyota Supra or Toyota Soarer fitted with a 7M-GTE engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 7M-GTE engines.

Suits 3.0L 7M-GTE DOHC 24V Supra and Soarer models as follows:

• MA70 Supra Turbo
• MA71 Supra Turbo
• GZ20 Soarer Turbo
• GZ21 Soarer Turbo 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Toyota exterior moulding clip pack to suit various Toyota models - Corolla, Carina, Corona, Hilux, Surf, Land Cruiser, MR2, Starlet and Supra

These clips have a 7mm square head and rubber washer and are plastic push in trim clips used to fasten side mouldings, vents, grillesand various other exterior trim items.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

• GA70, JZA70 and MA70

Toyota MR2

• ZZW30

Toyota Corolla

• AE80, AE81, AE82, CE80, EE80
• AE91, AE92, CE90, CE96, CE97, EE90, EE96, EE97, EE98
• AE100, AE101, AE102, CE100, CE106, CE108, CE109, EE100, EE101, EE105, EE106, EE107 and EE108

Toyota Carina

• TA60, TA62, CA60, SA60
• AT170, AT171, CT170, CT176, ET176, ST170 and ST171

Toyota Corona 

• CT147, KT147, TT147, YT140
• AT177, CT176, CT177, ET176 and ST171

Toyota Starlet

• EP70, EP71, EP76, NP70 and NP76

 Toyota Hilux / Surf

• KDN185, KZN185, RZN180, RZN185 and VZN185

Toyota Land Cruiser

• FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

 Toyota Soarer

• JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Genuine Eagle brand 7mm ignition leads to suit your Toyota Supra fitted with a 7M-GE engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 7M-GE engines.

Suits 3.0L 7M-GE DOHC 24V Supra models as follows:

• MA70

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Reproduction pair of amber or custom clear or smoke side marker indicator lenses for your third generation Toyota Supra A70 series.

Suited to all Toyota Supra A70 series built between 1986 to 1993 these lenses are wonderful in original amber or custom clear or smoke reproductions made to the highest quality and replace original part 20-149.

These lenses are fitted to the front mudguard (fender) of the MA70, GA70 and JZA70 Toyota Supra and replace the traditionally amber lenses. Clear and smoke lense must be used with an amber bulb. Vendor does not warrant regulatory compliance.

Complete your 'third gen' Toyota Supra project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

UK and Europe customers please contact Toyota Heritage prior to ordering.

Shipping worldwide weekly - no problems for overseas buyers.

• Amber lenses Amber lenses
• Clear lenses Clear lenses
• Smoke lenses Smoke lenses
•  

Complete your A70 Supra (third generation) project in style with these clips that hold down the trim beside your windscreen.

A70 Supras have one of these clips to hold the top trim that sits along the top of the windscreen where the roof meets.

OEM genuine and brand new these clips help your project along to a great finish.

A limited number only in stock.

Shipping worldwide weekly - no problems for overseas buyers.

Radiator support to bonnet (hood) rubber seal fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Cressida, Land Cruiser, MR2, Hilux, Starlet and Supra

These clips are used to fasten the rubber strip that sits between the bonnet (hood) underside and top of the radiator support panel to reduce wind and water coming into the under bonnet (hood) area. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
• ST160, ST162, AT160, ST163, ST164 and ST165
• ST180, ST184 and ST185
• ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

• All models from KE30 through to ZWE182

 Toyota Corona

• All models from ST140 through to ST215

Toyota Cressida

• All models from MX32 through to RX81

Toyota Hilux and Surf

• All models from LN130 through to VZN185

Toyota Land Cruiser

• All models from BJ60 through HZJ105

Toyota MR2

• AW10 andAW11
• ZZW30

 Toyota Supra

• GA70, JZA70 and MA70
• JZA80

Toyota Starlet

• KP60, KP61

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.