Toyota Soarer Z40 Spare Parts

Spare parts for Toyota Soarer models including UZZ40

Toyota Interior Trim Panel Fastener Clip Pack TH0362

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 9mm hole and are a plastic push in trim clips used to fasten interior panels such as door cards, trim panels, door pillars, boot linings and pillars.

 Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

  • JZA80

Toyota MR2

  • SW20, SW21
  • ZZW30

Toyota GR Four Yaris 

  • GXPA16

Toyota Corolla

  • AE101, AE102, CE100, EE100, EE101
  • AE110, AE111, AE112, AE114, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE110, ZZE111, ZZE112
  • CDE120, NDE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
  • ZZE130
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
  • NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
  • NRE181, ZRE182 and ZWE182

Toyota Celica

  • ZZT230 and ZZT231

 Toyota Carina

  • ST160, ST162 and ST163

Toyota Corona

  • AT190, CT190, CT195, ST190, ST191, ST195
  • AT210, AT211, CT210, CT211, CT215, CT216, ST210, ST215
  • AT220, CT220 and ST220

Toyota Hilux

  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

  • FZJ71, FZJ76, FZJ78, FZJ79, GRJ71, GRJ76, GRJ78, GRJ79, HDJ79, HZJ71, HZJ76, HZJ78, HZJ79, KZJ77, LJ77, LJ79, RJ77, VDJ76, VDJ78, VDJ79
  • FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105, UZJ100
  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121, VZJ125
    GDJ150, GDJ151, GDJ155, GRJ150, GRJ151, GRJ152, KDJ150, KDJ155, LJ150, TRJ150, TRJ152 and TRJ155

Toyota Soarer

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Exterior Moulding or Vent Clip Pack TH0497

Toyota exterior moulding clip pack to suit various Toyota models - Corolla, Carina, Corona, Hilux, Surf, Land Cruiser, MR2, Starlet and Supra

These clips have a 7mm square head and rubber washer and are plastic push in trim clips used to fasten side mouldings, vents, grillesand various other exterior trim items.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

  • GA70, JZA70 and MA70

Toyota MR2

  • ZZW30

Toyota Corolla

  • AE80, AE81, AE82, CE80, EE80
  • AE91, AE92, CE90, CE96, CE97, EE90, EE96, EE97, EE98
  • AE100, AE101, AE102, CE100, CE106, CE108, CE109, EE100, EE101, EE105, EE106, EE107 and EE108

Toyota Carina

  • TA60, TA62, CA60, SA60
  • AT170, AT171, CT170, CT176, ET176, ST170 and ST171

Toyota Corona 

  • CT147, KT147, TT147, YT140
  • AT177, CT176, CT177, ET176 and ST171

Toyota Starlet

  • EP70, EP71, EP76, NP70 and NP76

 Toyota Hilux / Surf

  • KDN185, KZN185, RZN180, RZN185 and VZN185

Toyota Land Cruiser

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

 Toyota Soarer

  • JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Scrivet Clip 7mm

Toyota scrivet mounting clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser, Hilux, Surf, Starlet and  MR2.

These clips have a 14mm collar diameter, 8mm stem grip length and fit to a 7mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

Toyota Celica 

  • ZZT230 and ZZT231

Toyota Corolla

  • AE101, AE102, CE100, EE100, EE101
  • ZZE110, WZE110, ZZE111 and ZZE112

Toyota Carina

  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Corona

  • AT210, AT211, CT211, CT216, ST210 and ST215

Toyota Soarer 

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Interior Trim Clip Pack TH0361

Interior trim clip pack to suit various Toyota models - Celica, Camry, Corolla, Corona, Cressida, Soarer, Starlet and Supra

These clips are

Used with a 6.6mm hole and are plastic push in trim clips used to fasten interior trim sections to the inner body work and on some models they are used to fasten bumper sections to the main bumper cover. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • ST180, ST184 and ST185

Toyota Supra

  • JZA80

Toyota Corolla

  • AE100, AE101, AE102, AE104, CE100, CE104, CE106, CE108, CE109, EE100, EE101, EE102, EE103, EE104, EE105, EE106, EE107 and EE108

 Toyota Corona

  • AT177, CT176, CT177 and ET176

Toyota Camry

  • CV10, CV11, SV10, SV11 and SV12

Toyota Starlet

  • EP70, EP71, EP76 and NP70

Toyota Soarer

  • UZZ40 

Toyota Cressida

  • GX70, LX76, YX76 and YX78

Toyota Carina

  • AT150, AT151, CT150, ST150
  • AT160, ST162
  • CT176, ET176
  • ST180, ST181, ST182 and ST183

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota 10mm Interior Clip Pack

Toyota scrivet mounting clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina, Hilux, Soarer and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 11mm stem length and fit to a 10mm hole are a plastic push in trim clips used to fasten door trim cards, boot lining panels, console trims, rear door trims, tailgate trims, pillar trim, roof lining edge trims.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

 Toyota Corolla

  • AE91, AE92, AE95, CE90 and EE90

Toyota Caldina

  • AT191, CT190, ST190, ST191 and ST195

Toyota Carina

  • AT190, AT191, CT190 and ST191

Toyota Corona

  • ST191

Toyota Hilux

  • LN50, LN51, LN55, LN56, RN55, YN51, YN56
  • LN60, LN61, LN65, RN61, RN66, YN60, YN61G, YN61V, YN65
  • LN80, LN81, LN85, LN86, RN80, RN85, VZN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, VZN90, VZN95, YN90, YN92
  • LN100, LN105, LN106, LN107, RN101, RN105, RN106, VZN100, VZN105, YN100, YN106
  • LN110, LN111, RN110, VZN110, YN110
  • LN200, LN205 and RZN200

Toyota Soarer 

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Bonnet Hood Insulation Clip Pack (TH0500)

Toyota bonnet (hood) insulation clip pack to suit various Toyota models - Celica, Corolla, Hilux, Surf, Prado, Soarer and Supra

These clips have a 24.5mm head are used with a 7mm hole and are plastic push in trim clips used to fasten the under bonnet (hood) insulation sheet. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • ZZT230 and ZZT231

Toyota Supra

  • JZA80

Toyota Corolla

  • AE101, CE101, CE102, CE105, CE107
  • AE111, AE115, CDE110, CE113, CE116, WZE110, ZZE11, ZZE112
  • CDE120, NDE120, ZRE120, ZZE120, ZZE121 and ZZE122

Toyota Hilux / Surf

  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Prado

  • GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121 and VZJ125

 Toyota Soarer

  • JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Scuff Plate Door Moulding and Flare Clip Pack (TH0363)

Toyota screw mounting grommet clip pack to suit various Toyota models - Celica, Corolla, Carina, Caldina, Land Cruiser, Prado, Hilux, Surf and  Soarer

These clips have a 12.8m top head diameter on a 17.5mm head diameter, 12mm fitted length and fit to a 8.5mm hole are a plastic push in trim clip used to fasten door scuff plates, door opening trim moulding, carpet edges, exterior door moulds and flares, plastic panels on top of front guards under bonnet, mudguards, spoilers, boot trays

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205
  • ZZT230 and ZZT231

Toyota Corolla

  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
  • CDE120, NDE120, NZE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
  • ZZE130
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153 and ZZE150

Toyota Carina

  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT211, CT216, ST210 and ST215

Toyota Land Cruiser

  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • GRN280, GRN285, TRN280 and TRN285

Toyota Soarer

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Screw Mounting Grommet Clip Pack TH0402

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla Caldina, Soarer and GR4 Yaris

These clips have a fit to a 6.4 mm hole, head diameter of 16 mm and a total stem length of 16mm with a stem grip depth of 10mm are a plastic push in clip used to fasten interior panels, inner fenders and other trim panels.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Corolla

  • ZRE120
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142 (back door panel)
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Caldina 

  • AZT241, AZT246, ST246 and ZZT241

Toyota GR4 Yaris (inner fender)

  • GXPA16 and MXPA12

Toyota Soarer (back trim panel)

  • Z40 

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Engine Bay Inner Guard Bumper Bar Clip Pack (TH0333)

Toyota push mounting clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser, Hilux, Surf, Starlet and  MR2.

These clips have a 18mm head diameter, 9mm stem length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • ZZW30

Toyota Celica 

  • ZZT230 and ZZT231

Toyota GR Four Yaris

  • GXPA16

Toyota Corolla

  • AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
  • AE101, AE102, CE100, EE100, EE101
  • ZZE110, WZE110, ZZE111 and ZZE112
  • NZE120, NZE141, ZZE120, ZZE121, ZZE122, ZZE123, CDE120, NDE120, NZE120, ZRE120
  • ZZE130
  • ZRE142, ZRE143, ZZE141, ZZE142, AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182

Toyota Carina

  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Hilux and Surf

  • LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, YN90, YN92
  • LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
  • LN110, LN112, RN110, YN110
  • RN125
  • KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
  • KDN150, LN152, LN155, RZN152, RZN154
  • KDN165, KZN165, RZN168, RZN169, VZN167
  • KDN170, LN171, LN172, RZN174, VZN172
  • KDN190, LN191, RZN193
  • LN200, RZN200
  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP90, EP91, EP95 and NP90

Toyota Soarer 

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

TMC Build Plate Models built after 1980 all markets

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

Toyota Screw Mounting Grommet Clip Pack TH0397

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, GT86, Hilux, Land Cruiser, Prado and Soarer.

These clips have a 16.8mm head diameter and fit to a 8.5mm square hole are a plastic push in trim clips used to fasten bumper covers, side members, side mouldings, radiator grilles and other plastic to metal body applications.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Corolla

  • NRE181, ZRE181, ZRE182 and ZWE182 (side member)

Toyota GT86

  • ZN6 (rear bumper)

Toyota Hilux

  • GUN112, KUN112, TGN110, TGN111 (radiator grille)
  • GGN120, GGN125, GUN122, GUN123, GUN125, GUN126, KUN122, KUN125, KUN126, LAN125, TGN120, TGN121, TGN126, TGN128 (radiator grille)
  • GGN135, GUN135, GUN136, KUN135, KUN136, TGN136, TGN138 (radiator grille)

Toyota Land Cruiser

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100 (hood [bonnet], fender [mudguard] and side moulding)

 Toyota Prado

  • GDJ150, GRJ150, KDJ150, LJ150, TRJ150 and TRJ155 (radio / dashboard)

Toyota Soarer

  • Z40 (side moulding)

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size: