Spare parts suitable for Toyota MR2 W30 Series

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 9mm hole and are a plastic push in trim clips used to fasten interior panels such as door cards, trim panels, door pillars, boot linings and pillars.

 Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

• JZA80

Toyota MR2

• SW20, SW21
• ZZW30

Toyota GR Four Yaris 

• GXPA16

Toyota Corolla

• AE101, AE102, CE100, EE100, EE101
• AE110, AE111, AE112, AE114, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE110, ZZE111, ZZE112
• CDE120, NDE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
• ZZE130
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
• NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
• NRE181, ZRE182 and ZWE182

Toyota Celica

• ZZT230 and ZZT231

 Toyota Carina

• ST160, ST162 and ST163

Toyota Corona

• AT190, CT190, CT195, ST190, ST191, ST195
• AT210, AT211, CT210, CT211, CT215, CT216, ST210, ST215
• AT220, CT220 and ST220

Toyota Hilux

• GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

• FZJ71, FZJ76, FZJ78, FZJ79, GRJ71, GRJ76, GRJ78, GRJ79, HDJ79, HZJ71, HZJ76, HZJ78, HZJ79, KZJ77, LJ77, LJ79, RJ77, VDJ76, VDJ78, VDJ79
• FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
• FZJ100, FZJ105, HDJ100, HDJ101, HZJ105, UZJ100
• GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

• GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121, VZJ125
  GDJ150, GDJ151, GDJ155, GRJ150, GRJ151, GRJ152, KDJ150, KDJ155, LJ150, TRJ150, TRJ152 and TRJ155

Toyota Soarer

• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota push mounting clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser, Hilux, Surf, Starlet and  MR2.

These clips have a 18mm head diameter, 9mm stem length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

• ZZW30

Toyota Celica 

• ZZT230 and ZZT231

Toyota GR Four Yaris

• GXPA16

Toyota Corolla

• AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
• AE101, AE102, CE100, EE100, EE101
• ZZE110, WZE110, ZZE111 and ZZE112
• NZE120, NZE141, ZZE120, ZZE121, ZZE122, ZZE123, CDE120, NDE120, NZE120, ZRE120
• ZZE130
• ZRE142, ZRE143, ZZE141, ZZE142, AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182

Toyota Carina

• AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

• AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

• GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Hilux and Surf

• LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
• LN90, LN91, RN90, YN90, YN92
• LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
• LN110, LN112, RN110, YN110
• RN125
• KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
• KDN150, LN152, LN155, RZN152, RZN154
• KDN165, KZN165, RZN168, RZN169, VZN167
• KDN170, LN171, LN172, RZN174, VZN172
• KDN190, LN191, RZN193
• LN200, RZN200
• KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

• EP90, EP91, EP95 and NP90

Toyota Soarer 

• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota exterior moulding clip pack to suit various Toyota models - Corolla, Carina, Corona, Hilux, Surf, Land Cruiser, MR2, Starlet and Supra

These clips have a 7mm square head and rubber washer and are plastic push in trim clips used to fasten side mouldings, vents, grillesand various other exterior trim items.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

• GA70, JZA70 and MA70

Toyota MR2

• ZZW30

Toyota Corolla

• AE80, AE81, AE82, CE80, EE80
• AE91, AE92, CE90, CE96, CE97, EE90, EE96, EE97, EE98
• AE100, AE101, AE102, CE100, CE106, CE108, CE109, EE100, EE101, EE105, EE106, EE107 and EE108

Toyota Carina

• TA60, TA62, CA60, SA60
• AT170, AT171, CT170, CT176, ET176, ST170 and ST171

Toyota Corona 

• CT147, KT147, TT147, YT140
• AT177, CT176, CT177, ET176 and ST171

Toyota Starlet

• EP70, EP71, EP76, NP70 and NP76

 Toyota Hilux / Surf

• KDN185, KZN185, RZN180, RZN185 and VZN185

Toyota Land Cruiser

• FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

 Toyota Soarer

• JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Inner guard (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Camry, MR2, Carina, Caldina

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
• ST160, ST162, AT160, ST163, ST164 and ST165
• ST180, ST184 and ST185
• ST200, ST202, ST203, ST204 and ST205

 Toyota MR2

• AW10 and AW11
• SW20 and SW21
• ZZW30

Toyota GR Four Yaris

• GXPA16

Toyota Corolla

• AE81, AE82, AE85 and AE86
• AE90, AE92, AE93, AE94, AE95 and AE96
• AE101, AE102 and AE112 

 Toyota Camry

• SV10, SV11, SV12, CV10 and CV11
• SV20, SV21 and SV22

Toyota Caldina 

• ST191, ST195 and ST198

 Toyota Carina

• TA40, TA41, TA42, TA47, TA57, RA40, RA45, RA46, RA55 and RA56
• AA60, KA67V, AA63, TA60, TA61, TA67V, TA62, TA63, RA63, CA60 and CA67V
• ST162
• ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V
• AT192, AT190, AT191, ST190, ST195, CT190 and CT195
• AAT212, AT210, AT211, ST210, ST215, CT210, CT215, CT211 and CT216

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Frunk clip and bungey cord for your third generation Toyota MR2 W30 series .

Suited to all Toyota MR2 ZZW30 also known as a Toyota MRS, Toyota MR2 Roadster and Toyota MR Roadster built between 1999 to 2007 our frunk clip comes complete with bungey cord, is stronger than OEM factory originals and is made in Australia to the highest quality.

A small but very functional part, this clip holds the frunk spare wheel cover up whilst the front hood is open - just the thing needed if you're changing a tyre (especially in the wind, rain or snow). Why perservere with a broken clip when you can now simply replace it with this reproductin by Toyota Heritage.

Complete your 'third gen' Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

Front floor carpet mat set for your third generation W30 series Toyota MR2.

Suited to all Toyota MR2 ZZW30 also known as a Toyota MRS, Toyota MR2 Roadster and Toyota MR Roadster built between 1999 to 2007 our carpet floor mats are patterned off original OEM factory mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

You can also select the colour of your edge binding by using the drop down menus too.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'third gen' Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Edge binding colours Edge binding colours
• 
•  

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

Toyota bumper and grille clip pack to suit various Toyota models - Supra, MR2, Corolla and Celica.

These clips have a 19mm head, 26mm stem length and fit to a 8.5mm hole and are a plastic push in trim clips used to fasten radiator covers, front grille, front bumper bar, rear bumper bar and seat tracks.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

• JZA80

Toyota MR2

• SW20, SW21
• ZZW30

 Toyota Corolla

• AE100 and AE101

Toyota Celica

• AT200, ST202, ST203, ST204 and ST205

 Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Radiator support to bonnet (hood) rubber seal fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Cressida, Land Cruiser, MR2, Hilux, Starlet and Supra

These clips are used to fasten the rubber strip that sits between the bonnet (hood) underside and top of the radiator support panel to reduce wind and water coming into the under bonnet (hood) area. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
• ST160, ST162, AT160, ST163, ST164 and ST165
• ST180, ST184 and ST185
• ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

• All models from KE30 through to ZWE182

 Toyota Corona

• All models from ST140 through to ST215

Toyota Cressida

• All models from MX32 through to RX81

Toyota Hilux and Surf

• All models from LN130 through to VZN185

Toyota Land Cruiser

• All models from BJ60 through HZJ105

Toyota MR2

• AW10 andAW11
• ZZW30

 Toyota Supra

• GA70, JZA70 and MA70
• JZA80

Toyota Starlet

• KP60, KP61

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina and  MR2.

These clips have a 20mm head diameter, 23mm length and fit to a 8mm square hole are a plastic push in trim clips used to fasten bumper covers, inner wheel arches, splashguards, sill panels and mud-flaps.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

• ZZW30

Toyota Corolla

• CDE120, NDE120, ZZE120 and ZZE121

Toyota Carina

• AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
• AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

• AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
• AT211, CT216, ST210, ST215
• AZT24, AZT246, ST246 and ZZT241

 Toyota Corona 

• AT190, CT190, CT195, ST190, ST191, ST195
• AT210, AT211, CT210, CT211, CT215, CT216, ST210, ST215
• AT220, CT220 and ST220

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Custom coloured and logo wind deflector suitable for your Toyota MR2 Spyder.

Suited specifically to the Third Generation Toyota MR2 Spyder ZZW30 also known as a Toyota MRS, Toyota MR2 Roadster and Toyota MR Roadster these wind deflectors have been made in Australia to the highest quality and replace OEM part no. 63230-17030

Available in five different colours Toyota Heritage's wind deflectors are complete with foam rubber gasket for ultimate best fitment.

Select your colour by using the drop down box for:

• Clear - looks great on all body colours
• Smoke - also looks great on all body colours
• Day Glow Orange - looks fantastic with OEM body colours of Black, Spectra Blue, Liquid Silver Metallic and Electric Green Mica
• Solar Yellow
• Spectra Blue

Select the second drop down box to chose your logo - either the MR2 logo (letters) or the Mid Ship Runabout (eagle).

Complete your Third Generation Toyota MR2 Spyder ZZW30 in style with these custom wind deflectors from Toyota Heritage.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.