Spare parts suitable for Toyota MR2 W20 Series

Genuine Eagle brand 5mm Leads to suit your SW20 Toyota MR2 Turbo built after November 1991. 

Our photo shows each of the boot and tube assemblies specific to this kit that suits the Toyota MR2 SW20 Turbo.

Suits 2.0L 3S-GTE DOHC 16V Fuel Injection Turbo models of the SW20 Toyota MR2 Turbo referred to as Rev 2+ Turbo, MR2 GT and MR2 GT-S.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Toyota bumper and grille clip pack to suit various Toyota models - Supra, MR2, Corolla and Celica.

These clips have a 19mm head, 26mm stem length and fit to a 8.5mm hole and are a plastic push in trim clips used to fasten radiator covers, front grille, front bumper bar, rear bumper bar and seat tracks.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

• JZA80

Toyota MR2

• SW20, SW21
• ZZW30

 Toyota Corolla

• AE100 and AE101

Toyota Celica

• AT200, ST202, ST203, ST204 and ST205

 Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota scrivet mounting clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser, Hilux, Surf, Starlet and  MR2.

These clips have a 14mm collar diameter, 8mm stem grip length and fit to a 7mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

• SW20 and SW21

Toyota Celica 

• ZZT230 and ZZT231

Toyota Corolla

• AE101, AE102, CE100, EE100, EE101
• ZZE110, WZE110, ZZE111 and ZZE112

Toyota Carina

• AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Corona

• AT210, AT211, CT211, CT216, ST210 and ST215

Toyota Soarer 

• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Door card, side trim panel and fascia fastener clip pack to suit various Toyota models - Caldina, Celica, Corolla, Corona, Supra, MR2, Soarer, Prado, Yaris, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door as well as other interior trim and fascia panels.

These are a push in clip that have a fit to a 9mm hole size and measure 12.8mm ( top head diameter), 15.6mm (centre head diameter) , 17.7mm (bottom head diameter) with a stem length of 14.2mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Caldina

• AT191, CT190, CT196, CT197, CT198, CT199, CT216, ET196, ST190, ST191, ST195, ST198
• AT211, ST210, ST215

 Toyota Celica 

• ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

• AE91, AE92, AE95, CE90, EE90
• AE100, AE101, AE102, AE103, AE104, CE100, CE101, CE104, EE100, EE101
• AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
• CDE120, ZRE120, ZZE120, ZZE121, ZZE122 and ZZE123

 Toyota Corona

• YT140

 Toyota Hilux

• KDN145, LN140, LN141, LN145, LN147, RZN142, RZN144, RZN147, RZN148, RZN149
• KDN150, KDN151, LN150, LN152,
• KDN165, KDN166, KZN165, LN166, LN167
• KDN170, LN170, LN171, LN172, RZN173, RZN174, VZN172
• KDN190, KZN190, LN192 and RZN194

  Toyota Supra

• MA61, MA63

Toyota Land Cruiser 

• BJ60, FJ62, HJ60
• BJ73, FJ70, FJ73, FJ75, FZJ70, FZJ71, FZJ73, FZJ74, FZJ75, FZJ78, FZJ79, HDJ78, HDJ79, HJ75, HZJ70, HZJ71, HZJ73, HZJ74, HZJ75, HZJ76, HZJ77, HZJ78, HZJ79, KZJ70, KZJ71, KZJ73, KZJ77, KZJ78, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ75, PZJ77, RJ70, RJ73, RJ77
• FJ80, FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
• FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

• KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota MR2 

• SW20 and SW21

Toyota Soarer

• JZZ30, UZZ30, UZZ31 and UZZ32

Toyota Supra

• JZA80

Toyota Yaris 

• NCP10, NCP11, NCP12, NCP13, NLP10, SCP10
• NCP20
• EP80, EP81, EP82, EP85, NP80
• EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your SW20 MR2 project in style and improve handling and performance.

Ideal for street and track with a gain of up to 15% increased stiffness over factory sized bars.

Comes complete with bushes, brackets, links and lateral locks.

Toyota Heritage sway bars are Australian made, adjustable and powder coated to the highest standards.

The standard size bar we offer for the SW20 is 20mm powder coated.

We offer the opportunity for buyers to custom their bar by selecting 'Custom' in the drop down menu 'Bar Selection'.

We ship wordlwide weekly - no problems for overseas buyers.

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Inner guard (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Camry, MR2, Carina, Caldina

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
• ST160, ST162, AT160, ST163, ST164 and ST165
• ST180, ST184 and ST185
• ST200, ST202, ST203, ST204 and ST205

 Toyota MR2

• AW10 and AW11
• SW20 and SW21
• ZZW30

Toyota GR Four Yaris

• GXPA16

Toyota Corolla

• AE81, AE82, AE85 and AE86
• AE90, AE92, AE93, AE94, AE95 and AE96
• AE101, AE102 and AE112 

 Toyota Camry

• SV10, SV11, SV12, CV10 and CV11
• SV20, SV21 and SV22

Toyota Caldina 

• ST191, ST195 and ST198

 Toyota Carina

• TA40, TA41, TA42, TA47, TA57, RA40, RA45, RA46, RA55 and RA56
• AA60, KA67V, AA63, TA60, TA61, TA67V, TA62, TA63, RA63, CA60 and CA67V
• ST162
• ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V
• AT192, AT190, AT191, ST190, ST195, CT190 and CT195
• AAT212, AT210, AT211, ST210, ST215, CT210, CT215, CT211 and CT216

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.