Toyota MR2 W20 Series Parts

Spare parts for Toyota MR2 W20

Toyota Interior Trim Panel Fastener Clip Pack TH0362

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 9mm hole and are a plastic push in trim clips used to fasten interior panels such as door cards, trim panels, door pillars, boot linings and pillars.

 Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

  • JZA80

Toyota MR2

  • SW20, SW21
  • ZZW30

Toyota GR Four Yaris 

  • GXPA16

Toyota Corolla

  • AE101, AE102, CE100, EE100, EE101
  • AE110, AE111, AE112, AE114, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE110, ZZE111, ZZE112
  • CDE120, NDE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
  • ZZE130
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
  • NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
  • NRE181, ZRE182 and ZWE182

Toyota Celica

  • ZZT230 and ZZT231

 Toyota Carina

  • ST160, ST162 and ST163

Toyota Corona

  • AT190, CT190, CT195, ST190, ST191, ST195
  • AT210, AT211, CT210, CT211, CT215, CT216, ST210, ST215
  • AT220, CT220 and ST220

Toyota Hilux

  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

  • FZJ71, FZJ76, FZJ78, FZJ79, GRJ71, GRJ76, GRJ78, GRJ79, HDJ79, HZJ71, HZJ76, HZJ78, HZJ79, KZJ77, LJ77, LJ79, RJ77, VDJ76, VDJ78, VDJ79
  • FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105, UZJ100
  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121, VZJ125
    GDJ150, GDJ151, GDJ155, GRJ150, GRJ151, GRJ152, KDJ150, KDJ155, LJ150, TRJ150, TRJ152 and TRJ155

Toyota Soarer

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota MR2 SW20 7mm lead kit for Rev 1 (TH74577)

Genuine Eagle brand 7mm ignition leads to suit your SW20 Toyota MR2 built from 1989 to November 1991

Our photo shows each of the boot and tube assemblies specific to this kit that suits the SW20 MR2.

Suits 2.0L 3S-GE DOHC 16V Fuel Injection non-turbo models of the SW20 Toyota MR2 referred to as Rev 1.

NOTE: for SW20 built after November 1991 please see separate listing for product TH54631

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$88.15
2 In Stock

Toyota Door Card Interior Trim 8.5mm Clip Pack TH0378

Toyota door card interior trim clip pack to suit various Toyota models - Corolla, Carina, Corona, Cressida, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 8.5mm hole are a plastic push in trim clips used to fasten door cards, trim panels, door pillars, boot linings and pillars etc.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

 Toyota Corolla

  • AE101
  • AE91, AE92, AE95, CE90, CE96, CE97, EE90, EE96, EE97 and EE98

Toyota Carina

  • AT171, CT170, CT176, ET176, ST171
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Corona

  • AT170, AT171, AT175, CT170, ST170, ST171
  • AT210, AT211, AT220, CT210, CT211, CT215, CT216, CT220, ST210, ST215 and ST220

Toyota Cressida

  • GX81, LX80, MX81, MX83, RX80 and RX81

Toyota Land Cruiser 

  • BJ73, FJ70, FJ73, HZJ70, HZJ73, HZJ77, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ77, RJ70, RJ73, RJ77
  • FJ80, FZJ80, HDJ80, HDJ81, HZJ80 and HZJ81

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota MR2 SW20 door courtesy light lenses

Reproduction courtesy lamp lenses to suit all SW20 and SW21 Toyota MR2.

Available in clear or original red to complete your Toyota MR2 SW20 or SW21 project in style with these door courtesy light lenses.

Also known as a 'puddle lamp' in some markets, these lenses are fitted to the lamp in the door of your Toyota MR2 and provide light to see where you are stepping out and for approaching traffic to see that you have the door of your Toyota MR2 open.

Available in the following colours:

Custom colours:

  • Clear

Original colours:

  • Red

These are made using the highest calibre manufacturing techniques and fit with precision.

Suited to all SW20 and SW21 Toyota MR2 whether it be your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Shipping worldwide weekly - no problems for overseas buyers.

$65.00
* lense colour options:

Toyota Push Fit Plastic Rivet Clip 8mm (TH0005 33A)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina and  MR2.

These clips have a 16mm head diameter, 11mm fitted length and fit to a 8mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Available in Black or Grey - use the second drop down menu to select.

Suits the following models:

Toyota MR2

  • AW11
  • SW20 and SW21

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE86L
  • CDE120, NDE120, ZZE120 and ZZE121

Toyota Carina

  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • BJ60, BJ61, FJ60, FJ62, HJ60 and HJ61

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP71, EP76, NP70 and NP76

Toyota Corona 

  • AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

* Product Colour:

Toyota MR2 Turbo SW20 7mm lead kit for Rev 1 (TH74577)

Genuine Eagle brand 7mm ignition leads to suit your SW20 Toyota MR2 built from 1989 to November 1991

Our photo shows each of the boot and tube assemblies specific to this kit that suits the SW20 MR2 Turbo.

Suits 2.0L 3S-GTE DOHC 16V Fuel Injection Turbo models of the SW20 Toyota MR2 Turbo referred to as Rev 1 Turbo, MR2 GT or MR2 GT-S.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$88.15
1 In Stock

Toyota Screw Mounting Grommet Clip Pack TH0456

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 16mm collar diameter, 18mm stem length and fit to a 10mm x 10mm square hole and are a plastic push in trim clips used to fasten bumper bars, wheel arches, splashguards, sill panels, mud flaps, fuel tanks and fuel pipes.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

 Toyota Corolla

  • AE95
  • AE100, AE101, AE102, AE104, CE100, CE104, EE100 and EE101

Toyota Celica

  • AT160, ST160, ST161, ST162, ST163, ST165 and ST182

 Toyota Carina

  • ST160, ST162 and ST163

Toyota Corona

  • AT150, AT151, CT150, ST150, ST151
  • ST160 and ST162

Toyota Hilux

  • RN120, RN121, VZN120, VZN130, VZN131
  • KZN130, LN130, LN135, RN130, RN131, RN135, YN130, YN135
  • KDN185, KZN185, RZN180, RZN185, VZN180, VZN185
  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

  • KDJ90, KDJ95,KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota MR2 SW20 Kouki Rear Corner Lenses

Reproduction clear, smoke, amber or red rear side marker lenses for your second generation Toyota MR2 W20 series.

Suited to all 'Kouki' Toyota MR2 SW20 and SW21 built between 1994 to 1997 these lenses are wonderful as custom clear or smoke and OEM colour red or amber reproductions and are made to the highest quality and fit.

Clear and smoke coloured lenses must be used with an amber bulb (supplied). Vendor does not warrant regulatory compliance.

Please use the drop down menu to select the colour of the lenses you wish to purchase.

Complete your 'S-dub' second generation Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

UK and Europe customers please contact Toyota Heritage prior to ordering.

Shipping worldwide weekly - no problems for overseas buyers.

$235.00
* lense colour options:

Toyota Push Fit Plastic Rivet Clip 6.5mm (TH0372)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser and  MR2.

These clips have a 15mm head diameter, 12mm fitted length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • AW11L
  • SW20 and SW21

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
  • AE101, AE102, CE100, EE100, EE101
  • WZE110, ZZE111 and ZZE112

Toyota Carina

  • ST170G
  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • FJ62, FJ62G, FJ62V, BJ60, BJ61, FJ60, HJ60 and HJ61

Toyota Hilux and Surf

  • LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, YN90, YN92
  • LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
  • LN110, LN112, RN110, YN110
  • RN125
  • KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
  • KDN150, LN152, LN155, RZN152, RZN154
  • KDN165, KZN165, RZN168, RZN169, VZN167
  • KDN170, LN171, LN172, RZN174, VZN172
  • KDN190, LN191, RZN193
  • LN200, RZN200
  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP71, EP76, NP70 and NP76

Toyota Corona 

  • ST171, CT176, ET176, ST171
  • AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota MR2 SW20 Carpet Mat Set

Front floor carpet mat set for your second generation W20 series Toyota MR2.

Suited to all RHD Toyota MR2 SW20 built between 1989 to 1999 our carpet floor mats are patterned off original OEM factory mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'second gen' Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$90.00
* Carpet Colour:

* Carpet Pile:

* Edge Binding Colour:

Toyota Front and Rear Bumper Bar 9mm Clips Pack (TH0521)

Bumper cover fastener clip pack to suit various Toyota models - Celica, MR2, Supra and Soarer.

These clips are used to fasten front and rear bumpers into place. 

These are a push in clip that expands when the 9mm head is pushed in and holds firmly in place.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica (front bumper)

  • AT180, ST182, ST183, ST184 and ST185

Toyota MR2 (front bumper)

  • SW20 and SW21

 Toyota Supra (front and rear bumper)

  • JZA80

Toyota Soarer (front and rear bumper)

  • JZZ30, JZZ31, UZZ30, UZZ31 and UZZ32

 Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota MR2 SW20 Kouki complete set rear light lenses

Reproduction clear, smoke, amber or red rear indicator (turn signal) and rear side marker lenses for your second generation Toyota MR2 W20 series.

Suited to all 'Kouki' Toyota MR2 SW20 and SW21 built between 1994 to 1997 these lenses are wonderful as custom clear or smoke and OEM colour red or amber reproductions and are made to the highest quality and fit.

Clear and smoke coloured lenses must be used with an amber bulb (supplied). Vendor does not warrant regulatory compliance.

Please use the drop down menu to select the colour of the lenses you wish to purchase.

Complete your 'S-dub' second generation Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

UK and Europe customers please contact Toyota Heritage prior to ordering - This email address is being protected from spambots. You need JavaScript enabled to view it. 

Shipping worldwide weekly - no problems for overseas buyers.

$600.00
* lense colour options:

Toyota MR2 SW20 Side Marker Lenses 1989 to 1993

Reproduction side marker lenses to suit your second generation W20 series Toyota MR2.

Available in clear, smoke or amber complete your SW20 MR2 project in style with these side marker (turn signal) lenses.

These lenses suit Rev 1 and Rev 2 MR2 built between 1989 and 1993.

Availbale in the following colours:

Custom colours:

  • Clear
  • Smoke

Original colours:

  • Amber (JDM, Australia and 'rest of world')

These are made using the highest calibre manufacturing techniques and fit with precision.

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Clear and smoke colour lenses must be used with coloured bulbs. Product is a customisation part; seller does not warrant regulation compliance.

Shipping worldwide weekly - no problems for overseas buyers.

UK and Europe customers must contact Toyota Heritage prior to purchasing - This email address is being protected from spambots. You need JavaScript enabled to view it. 

$135.00
* lense colour options:

Toyota Interior Door Card Clip Pack (TH0505)

Toyota interior door card clip pack to suit various Toyota models - MR2, Corolla, Carina, Caldina, Land Cruiser, Prado, Hilux, Surf and Starlet.

These clips have a 13.3mm top head diameter on a 16.3mm head diameter, 13.3mm stem length and fit to a 8.5mm hole and are a plastic push in trim clip used to fasten 

door card and trim panel clips.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

Toyota Corolla

  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112

Toyota Carina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 ST210 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210 and ST215

Toyota Land Cruiser

  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • GKDN165, KDN166 and KDN190

Toyota Starlet

  • EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota MR2 SW20 Tail Light Lenses Zenki

Reproduction tail light lenses to suit your second generation W20 series Toyota MR2.

Available in clear, smoke, amber or red complete your SW20 MR2 project in style with these rear indicator (turn signal) lenses.

These lenses suit Rev 1 and Rev 2 MR2 built between 1989 and 1993.

Availbale in the following colours:

Custom colours:

  • Clear
  • Smoke

Original colours:

  • Red (USDM)
  • Amber (JDM, Australia and 'rest of world')

These are made using the highest calibre manufacturing techniques and fit with precision.

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Clear and smoke colour lenses must be used with coloured bulbs. Product is a customisation part; seller does not warrant regulation compliance.

Shipping worldwide weekly - no problems for overseas buyers.

UK and Europe customers must contact Toyota Heritage prior to purchase - This email address is being protected from spambots. You need JavaScript enabled to view it. 

$370.00
* lense colour options:

MR2 SW20 Rear Sway Bar Kit

Complete your SW20 MR2 project in style and improve handling and performance.

Ideal for street and track with a gain of up to 15% increased stiffness over factory sized bars.

Comes complete with bushes, brackets, links and lateral locks.

Toyota Heritage sway bars are Australian made, adjustable and powder coated to the highest standards.

The standard size bar we offer for the SW20 is 20mm powder coated red.

We offer the opportunity for buyers to custom their bar by selecting 'Custom' in the drop down menu 'Bar Selection'.

We ship wordlwide weekly - no problems for overseas buyers.

$285.00
* Rear Sway Bar Diameter:

Toyota MR2 SW20 series Bespoke Dash Fascia

Reproduction bespoke dash fascia to suit second generation Toyota MR2 SW20 series models built between 1989 to 1999.

Suited to all W20 series or second generation MR2 SW20 and SW21 our dash fascias are made in Australia to the highest quality, 3D printed and can be configured (produced) to suit a wide range of instrumentation from OEM through to performance and electric-vehicle ('EV') conversion applications.

Instrumentation configurations are available for:

  • Blank (no inset for instrumentation)
  • Haltech IC7
  • Racepack IQ3
  • Motec C125/C185 and C127/C128
  • AIM LINK MXP, MXS or MXG
  • AEM ED7/CD7 or ED5/CD5
  • Powertune 7"
  • ECU Master ADU5 or ADU7
  • Holley EFI 7"
  • Fueltech FT450/FT550 and FT500/FT600

If your chosen instrumentation configuration is not listed above please email This email address is being protected from spambots. You need JavaScript enabled to view it.

 Please use the drop down menus to select your dash fascia configuration.

 Suited to either right hand drive or left hand drive.

Complete your 'second gen' Toyota MR2 project in style - whether its a retro-ride, track car, rally car, daily driver, restoration project or BEV conversion.

Shipping worldwide weekly - no problems for overseas buyers.

$350.00
Out of stock

Toyota 10mm Interior Clip Pack

Toyota scrivet mounting clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina, Hilux, Soarer and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 11mm stem length and fit to a 10mm hole are a plastic push in trim clips used to fasten door trim cards, boot lining panels, console trims, rear door trims, tailgate trims, pillar trim, roof lining edge trims.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

 Toyota Corolla

  • AE91, AE92, AE95, CE90 and EE90

Toyota Caldina

  • AT191, CT190, ST190, ST191 and ST195

Toyota Carina

  • AT190, AT191, CT190 and ST191

Toyota Corona

  • ST191

Toyota Hilux

  • LN50, LN51, LN55, LN56, RN55, YN51, YN56
  • LN60, LN61, LN65, RN61, RN66, YN60, YN61G, YN61V, YN65
  • LN80, LN81, LN85, LN86, RN80, RN85, VZN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, VZN90, VZN95, YN90, YN92
  • LN100, LN105, LN106, LN107, RN101, RN105, RN106, VZN100, VZN105, YN100, YN106
  • LN110, LN111, RN110, VZN110, YN110
  • LN200, LN205 and RZN200

Toyota Soarer 

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota MR2 SW20 Rev tail light lenses Kouki

Reproduction clear, smoke, amber or red rear indicator (turn signal) lenses for your second generation Toyota MR2 W20 series.

Suited to all 'Kouki' Toyota MR2 SW20 and SW21 built between 1994 to 1997 these lenses are wonderful as custom clear or smoke and OEM colour red or amber reproductions and are made to the highest quality and fit.

Clear and smoke coloured lenses must be used with an amber bulb (supplied). Vendor does not warrant regulatory compliance.

Please use the drop down menu to select the colour of the lenses you wish to purchase.

Complete your 'S-dub' second generation Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

UK and Europe customers please contact Toyota Heritage prior to ordering.

Shipping worldwide weekly - no problems for overseas buyers.

$390.00
* lense colour options:

Toyota MR2 SW20 5mm lead kit for Rev 3 to Rev 5 (TH54699)

Genuine 5mm Eagle Leads to suit your SW20 Toyota MR2 built from November 1993 onwards.

Suits 2.0L 3S-GE DOHC 16V Fuel Injection non-turbo models of the SW20 Toyota MR2 referred to as Rev 3, Rev 4 and Rev 5.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$114.35