Spare parts suitable for Toyota MR2 W10 Series

Reproduction clear or smoke side indicator lenses for your first generation W10 series Toyota MR2.

Suited to all USDM Toyota MR2 AW10 and AW11 built between 1984 to 1989 these lenses are wonderful custom clear or smoke reproductions made to the highest quality and replace original Koito part 17-5.

These lenses are fitted to the front fender of North American delivered Toyota MR2 and replace the traditionally amber or type lenses. Must be used with an amber bulb (supplied). Vendor does not warrant regulatory compliance. 

Complete your 'A-dub' first generation Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

UK and Europe customers please contact Toyota Heritage prior to ordering - This email address is being protected from spambots. You need JavaScript enabled to view it. 

Shipping worldwide weekly - no problems for overseas buyers.

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina and  MR2.

These clips have a 16mm head diameter, 11mm fitted length and fit to a 8mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Available in Black or Grey - use the second drop down menu to select.

Suits the following models:

Toyota MR2

• AW11
• SW20 and SW21

Toyota Celica 

• AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

• AE86L
• CDE120, NDE120, ZZE120 and ZZE121

Toyota Carina

• AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
• AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

• AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
• AT211, CT216, ST210, ST215
• AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

• BJ60, BJ61, FJ60, FJ62, HJ60 and HJ61

Toyota Prado

• KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

• KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

• EP71, EP76, NP70 and NP76

Toyota Corona 

• AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction clear front indicator lenses for your first generation W10 series Toyota MR2. 

Suited to all Toyota MR2 AW10 and AW11 built between 1984 to 1989 these lenses are wonderful custom clear reproductions made to the highest quality and replace original part 03-04.

These lenses are fitted to the front bumper of the Toyota MR2 and replace the traditionally amber or amber with a small clear section type lenses. Must be used with an amber bulb (supplied). Vendor does not warrant regulatory compliance.

Complete your 'A-dub' first generation Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

UK and Europe customers please contact Toyota Heritage prior to ordering.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Front floor carpet mat set for your first generation W10 series Toyota MR2.

Suited to all LHD Toyota MR2 AW11 and AW10 built between 1984 to 1989 our carpet floor mats are patterned off original OEM factory mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'first gen' Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

• Edge binding colours Edge binding colours
• 
•  

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser and  MR2.

These clips have a 15mm head diameter, 12mm fitted length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

• AW11L
• SW20 and SW21

Toyota Celica 

• AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

• AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
• AE101, AE102, CE100, EE100, EE101
• WZE110, ZZE111 and ZZE112

Toyota Carina

• ST170G
• AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
• AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

• AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
• AT211, CT216, ST210, ST215
• AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

• FJ62, FJ62G, FJ62V, BJ60, BJ61, FJ60, HJ60 and HJ61

Toyota Hilux and Surf

• LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
• LN90, LN91, RN90, YN90, YN92
• LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
• LN110, LN112, RN110, YN110
• RN125
• KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
• KDN150, LN152, LN155, RZN152, RZN154
• KDN165, KZN165, RZN168, RZN169, VZN167
• KDN170, LN171, LN172, RZN174, VZN172
• KDN190, LN191, RZN193
• LN200, RZN200
• KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

• EP71, EP76, NP70 and NP76

Toyota Corona 

• ST171, CT176, ET176, ST171
• AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

UK and Europe buyers please make contact with Toyota Heritage before purchasing - This email address is being protected from spambots. You need JavaScript enabled to view it. 

Inner guard (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Camry, MR2, Carina, Caldina

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
• ST160, ST162, AT160, ST163, ST164 and ST165
• ST180, ST184 and ST185
• ST200, ST202, ST203, ST204 and ST205

 Toyota MR2

• AW10 and AW11
• SW20 and SW21
• ZZW30

Toyota GR Four Yaris

• GXPA16

Toyota Corolla

• AE81, AE82, AE85 and AE86
• AE90, AE92, AE93, AE94, AE95 and AE96
• AE101, AE102 and AE112 

 Toyota Camry

• SV10, SV11, SV12, CV10 and CV11
• SV20, SV21 and SV22

Toyota Caldina 

• ST191, ST195 and ST198

 Toyota Carina

• TA40, TA41, TA42, TA47, TA57, RA40, RA45, RA46, RA55 and RA56
• AA60, KA67V, AA63, TA60, TA61, TA67V, TA62, TA63, RA63, CA60 and CA67V
• ST162
• ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V
• AT192, AT190, AT191, ST190, ST195, CT190 and CT195
• AAT212, AT210, AT211, ST210, ST215, CT210, CT215, CT211 and CT216

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Front floor carpet mat set for your first generation W10 series Toyota MR2.

Suited to all RHD Toyota MR2 AW11 and AW10 built between 1984 to 1989 our carpet floor mats are patterned off original OEM factory mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'first gen' Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

• Edge binding colours Edge binding colours
• 
•  

Clear rear marker (indicator) lense to suit your AW11 Toyota MR2. 

Suits AW11 Mk1a MR2 - built between June 1984 and July 1986. 

These are made using the highest calibre manufacturing techniques and fit with precision. 

Replaces Koito 17-1AL (left side) and 17-1AR (right side) amber sections in your tail light arrangement to give a really neat custom look. 

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch. 

Must be used with an amber bulb (supplied). Vendor does not warrant regulatory compliance. 

Shipping world wide weekly - no problems for international buyers.

UK and Europe buyers please make contact with Toyota Heritage before purchasing This email address is being protected from spambots. You need JavaScript enabled to view it. 

Genuine 7mm Eagle Leads to suit your AW11 Toyota MR2 built from 1984 to 1989 

Suits  1.6L 4A-GE and 4A-GZE (Supercharged) DOHC 16V Fuel Injection models of the AW11 Toyota MR2.

Does not suit AW10 with 3A-LU engines.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

• Hi-temp Silicone Well Cover boot
• PVT insulator tube insulates plug terminal to prevent high voltage crossover
• Hi-temp Silicone Tip Seal.

Terminal Features

• High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
• Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
• Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

• Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
• High Dielectric Silicone inner jacket.
• Technologically advanced nylon tape adds tensile strength.
• 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

Radiator support to bonnet (hood) rubber seal fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Cressida, Land Cruiser, MR2, Hilux, Starlet and Supra

These clips are used to fasten the rubber strip that sits between the bonnet (hood) underside and top of the radiator support panel to reduce wind and water coming into the under bonnet (hood) area. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
• ST160, ST162, AT160, ST163, ST164 and ST165
• ST180, ST184 and ST185
• ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

• All models from KE30 through to ZWE182

 Toyota Corona

• All models from ST140 through to ST215

Toyota Cressida

• All models from MX32 through to RX81

Toyota Hilux and Surf

• All models from LN130 through to VZN185

Toyota Land Cruiser

• All models from BJ60 through HZJ105

Toyota MR2

• AW10 andAW11
• ZZW30

 Toyota Supra

• GA70, JZA70 and MA70
• JZA80

Toyota Starlet

• KP60, KP61

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.