Spare parts suitable for Toyota Yaris

New Old Stock and reproduction spare parts suitable for Toyota Yaris

Interior Trim Panel Fastener Clip Pack suitable for various Toyota models (TH0362)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 9mm hole and are a plastic push in trim clips used to fasten interior panels such as door cards, trim panels, door pillars, boot linings and pillars.

 Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

  • JZA80

Toyota MR2

  • SW20, SW21
  • ZZW30

Toyota GR Four Yaris 

  • GXPA16

Toyota Corolla

  • AE101, AE102, CE100, EE100, EE101
  • AE110, AE111, AE112, AE114, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE110, ZZE111, ZZE112
  • CDE120, NDE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
  • ZZE130
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
  • NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
  • NRE181, ZRE182 and ZWE182

Toyota Celica

  • ZZT230 and ZZT231

 Toyota Carina

  • ST160, ST162 and ST163

Toyota Corona

  • AT190, CT190, CT195, ST190, ST191, ST195
  • AT210, AT211, CT210, CT211, CT215, CT216, ST210, ST215
  • AT220, CT220 and ST220

Toyota Hilux

  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

  • FZJ71, FZJ76, FZJ78, FZJ79, GRJ71, GRJ76, GRJ78, GRJ79, HDJ79, HZJ71, HZJ76, HZJ78, HZJ79, KZJ77, LJ77, LJ79, RJ77, VDJ76, VDJ78, VDJ79
  • FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105, UZJ100
  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121, VZJ125
    GDJ150, GDJ151, GDJ155, GRJ150, GRJ151, GRJ152, KDJ150, KDJ155, LJ150, TRJ150, TRJ152 and TRJ155

Toyota Soarer

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Carpet Floor Mat Set Three Pieces suitable for Toyota Yaris GR Four

Three piece passenger cabin carpet floor mat for your Toyota Yaris GRFour. 

Suited specifically to the Toyota Yaris GRFour GXPA16 (aka a GRFour Yaris) this floor mat set is fitted to the front two foot wells and the third piece (rear) spans across the rear passenger floor and covers the drive shaft tunnel. These mats are made in Australia to the highest quality.

Available in four different colours and in either loop or plush pile this mat set can be purchased to match any previous carpet cargo area mat from Toyota Heritage. Simply use the drop down boxes to select your required carpet colour, binding colour and pile type (loop or plush). 

Complete your Toyota Yaris GRFour in style with this floor mat set from Toyota Heritage.

Shipping worldwide weekly - no problems for overseas buyers.

$170.00
NOTE! This item is Made To Order
* Carpet Pile:

* Carpet Colour:

* Edge Binding Colour:

Cargo Area Carpet Mat (Plush Full Sized) suitable for Toyota GR Yaris

Protect the cargo area of your Toyota Yaris GR4 with a plush pile cargo area mat from Koromo Heritage.

Suited specifically to the GR Yaris GXPA16 also known as a GRFour Yaris this cargo area carpet mat in plush pile has been made in Australia to the highest quality.

Also known as a luggage area the cargo area that our full sized mat covers includes the seat backs when laid down - our mat has an extra few centremeters to also cover the top edge of your rear seat.

Available in 14 different colours and you can select from one of eight edge binding colour that we offer. 

No similar product is available as an OEM part - now you can complete your Toyota GR Yaris in style with this full sized cargo area mat from Koromo Heritage.

Shipping worldwide weekly - no problems for overseas buyers.

$225.00
NOTE! This item is Made To Order
* Carpet Colour:

* Edge Binding Colour:

Sway Bar Kit suitable for Toyota GR Yaris

Improve handling and performance of your Toyota GR Yaris (GXPA16) with  custom front and rear Sway Bars.

Toyota Heritage sway bars are Australian made, three-way adjustable and powder coated to the highest standards.

The standard size sway bars we offer for the Toyota GR Yaris are 22mm (rear) and 24mm (front) finished in red powder coat. Ideal for street and track with increased torsional stiffness of 15% to 30% (22mm rear) and -20% to 15% (24mm front) over factory sized bars.

Our GR Yaris sway bars come complete with bushes, brackets, links and lateral locks.

We offer the opportunity for buyers to customise their sway bar thickness by selecting 'Custom' in the drop down menu below.

Buyers can select sway bar thickness for front or rear starting at 18mm and up to 25mm (or even thicker if required).

We ship worldwide weekly - no problems for overseas buyers.

$800.00
* Rear Sway Bar Diameter:

* Front Sway Bar Diameter:

Engine Bay Inner Guard Bumper Bar Clip Pack suitable for various Toyota models (TH0333)

Toyota push mounting clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser, Hilux, Surf, Starlet and  MR2.

These clips have a 18mm head diameter, 9mm stem length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • ZZW30

Toyota Celica 

  • ZZT230 and ZZT231

Toyota GR Four Yaris

  • GXPA16

Toyota Corolla

  • AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
  • AE101, AE102, CE100, EE100, EE101
  • ZZE110, WZE110, ZZE111 and ZZE112
  • NZE120, NZE141, ZZE120, ZZE121, ZZE122, ZZE123, CDE120, NDE120, NZE120, ZRE120
  • ZZE130
  • ZRE142, ZRE143, ZZE141, ZZE142, AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182

Toyota Carina

  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Hilux and Surf

  • LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, YN90, YN92
  • LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
  • LN110, LN112, RN110, YN110
  • RN125
  • KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
  • KDN150, LN152, LN155, RZN152, RZN154
  • KDN165, KZN165, RZN168, RZN169, VZN167
  • KDN170, LN171, LN172, RZN174, VZN172
  • KDN190, LN191, RZN193
  • LN200, RZN200
  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP90, EP91, EP95 and NP90

Toyota Soarer 

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Screw Mounting Grommet Clip Pack suitable for various Toyota models (TH0402)

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla Caldina, Soarer and GR4 Yaris

These clips have a fit to a 6.4 mm hole, head diameter of 16 mm and a total stem length of 16mm with a stem grip depth of 10mm are a plastic push in clip used to fasten interior panels, inner fenders and other trim panels.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Corolla

  • ZRE120
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142 (back door panel)
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Caldina 

  • AZT241, AZT246, ST246 and ZZT241

Toyota GR4 Yaris (inner fender)

  • GXPA16 and MXPA12

Toyota Soarer (back trim panel)

  • Z40 

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Cargo Area Carpet Mat (Half Size) suitable for Toyota Yaris GR Four

Protect the cargo area of your Toyota Yaris GR4 with a cargo area mat from Koromo Heritage.

Suited specifically to the GR Yaris GXPA16 also known as a GR Four Yaris this cargo area carpet mat in plush pile has been made in Australia to the highest quality.

Also known as a luggage area the cargo area that our half sized mat covers what most people call the trunk or boot space (when seats are in upright position).

Available in 14 different colours and you can select from one of eight edge binding colour that we offer.

No similar product is available as an OEM part - now you can complete your Toyota GR Yaris in style with this full sized cargo area mat from Koromo Heritage.

Shipping worldwide weekly - no problems for overseas buyers.

$185.00
NOTE! This item is Made To Order
* Carpet Colour:

* Edge Binding Colour:

* Carpet Pile:

Rear Sway Bar Kit suitable for Toyota GR Yaris

Improve handling and performance of your Toyota GR Yaris (GXPA16 ) with a custom rear Sway Bar.

Toyota Heritage sway bars are Australian made, three-way adjustable and powder coated to the highest standards.

The standard size bar we offer for the Toyota GR Yaris is 22mm (rear) finished in red powder coat. Ideal for street and track with increased torsional stiffness of 15% to 30% over factory sized bars.

Our GR Yaris sway bar comes complete with bushes, brackets, links and lateral locks.

We offer the opportunity for buyers to customise their sway bar by selecting the size required in the drop down menu 'Sway Bar Size'.

Buyers can select their desired sway bar thickness starting at 18mm and up to 25mm (or even thicker if required).

We ship worldwide weekly - no problems for overseas buyers.

$450.00
* Rear Sway Bar Diameter:

Screw Mounting Grommet Clip Pack suitable for various Toyota models (TH0889)

Toyota screw mounting grommet clip pack to suit various Toyota models - Aurion, Hilux, Surf, Yaris and GR4 Yaris

These clips have a fit to a 9mm square hole, with a 18mm stem and a 20mm collar are a plastic push in grommet used to fasten bumper covers, side members, hood (bonnet) linings and other plastic to metal body applications.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry (side member)

  • ACV40, ACV41, AHV40, GSV40
  • ACV51, ASV50, ASV51 and AVV50

 Toyota Hilux (front bumper, inner fender, bonnet / hood, air injection pump)

  • GUN112, KUN112, TGN110, TGN111
  • GGN120, GGN125, GUN122, GUN123, GUN125, GUN126, KUN122, KUN125, KUN126, LAN125, TGN120, TGN121, TGN126, TGN128
  • GGN135, GUN135, GUN136, KUN135, KUN136, TGN136, TGN138 

Toyota GR4 Yaris (inner fender)

  • GXPA16 and MXPA12

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

GR Yaris Front Sway Bar Kit

Roll Centre Adjusters suitable for Toyota GR Yaris

Reduce weight transfer and improve handling and performance of your Toyota GR Yaris (GXPA16) with Toyota Heritage roll centre adjusters.

Owners who have lowered their GR Yaris using adjustable coil overs may be experiencing increased roll and weight transfer when cornering. You can now adjust your roll centre back to the factory setting using Toyota Heritage roll centre adjusters and eliminate the increased roll caused through lowering your car.

Toyota Heritage GR Yaris roll centre adjusters are Australian made using high grade aluminium and are anodised to the highest standards.

The standard size roll centre adjuster we offer for the Toyota GR Yaris is 20mm. This is an ideal size suited to lowering your Toyota GR Yaris using coil overs and to the extent that does not require re-engineering of the tie-rod end ball joint at the steer knuckle.

For the series motorsport competitor Toyota Heritage can make custom sized roll centre adjusters to suit your GR Yaris - simply message us sThis email address is being protected from spambots. You need JavaScript enabled to view it. 
Our GR Yaris roll centre adjusters come complete with bolts, washers and nuts for simple fitment.

We ship worldwide weekly - no problems for overseas buyers.

$165.00

Cargo Area Tough Mat (Half Sized) suitable for Toyota GR Yaris

Cargo area 'tough mat' for your Toyota GR Yaris. 

You may also know this product as a luggage area mat or trunk mat for your GR Yaris.

Suited specifically to the GR Yaris GXPA16 also known as a GRFour Yaris this cargo area tough mat has been made in Australia to the highest quality.

Available in two colours. This half sized mat will cover the main cargo area when the rear seat of your Toyota GR Yaris is in the upright position. Our tough mats are trimmed and made from a tough wearing material to match the interior of your Toyota GR Yaris and protect the floor of your GR Yaris. Perfect for dog owners, the golf clubs and buggy or perhaps if you drive your track day GR Yaris to the track our mat is perfect for loading in your spare set of wheels and tyres that you only use on the track!

Complete your Toyota GR Yaris in style with this half sized cargo area mat from Toyota Heritage.

Shipping worldwide weekly - no problems for overseas buyers.

$185.00
NOTE! This item is Made To Order
* Colour - Tough Mat:

GR Yaris Front Sway Bar Kit

Front Sway Bar Kit suitable for Toyota GR Yaris

Improve handling and performance of your Toyota GR Yaris (GXPA16) with a custom front Sway Bar.

Toyota Heritage sway bars are Australian made, three-way adjustable and powder coated to the highest standards.

The standard size bar we offer for the Toyota GR Yaris is 24mm (front) finished in red powder coat. Ideal for street and track with increased torsional stiffness of -20% to +15% over factory sized bars.

Our GR Yaris sway bar comes complete with camber bolts, bushes, brackets, links and lateral locks.

We offer the opportunity for buyers to custom their bar by selecting 'Custom' in the drop down menu 'Bar Selection'. Buyers can then select the desired bar thickness starting at 18mm and up to 25mm (or even thicker if required).

We ship wordlwide weekly - no problems for overseas buyers.

$450.00
* Front Sway Bar Diameter:

Door Card Clip Pack suitable for various Toyota models (TH0061)

Toyota door card clip pack to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado and GR4 Yaris

These clips have a fit to a 9mm hole size, have a 12mm top head, 17mm centre head and a 18mm lower head  are a plastic push in clip used to fasten interior panels and door trims and other trim panels.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

  • MCV20, MCV21, SXV20, SXV23, SXV25
  • MCV36, ACV36
  • ACV40, ACV41, ACV45, AHV40, AHV41, ASV40, GSV40
  • ACV51, ASV50, ASV51, AVV50 and GSV50

Toyota Celica (door panel triangle)

  • ZZT230 and ZZT231 

 Toyota Corolla

  • AE101, AE111, AE112
  • ZRE120
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142 (back door panel)
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux

  • GGN120, GGN125, GUN122, GUN123, GUN125, GUN126, KUN122, KUN125, KUN126, TGN120, TGN121, TGN126
  • GUN135, GUN136, KUN135, KUN136 and TGN136

Toyota Land Cruiser 

  • VDJ79
  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • GRJ120, GRJ125, KDJ120, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125
  • GDJ150, GDJ151, GDJ155, GRJ150, GRJ151, GRJ152, KDJ150, KDJ155, LJ150, TRJ150, TRJ152 and TRJ155

Toyota GR4 Yaris

  • GXPA16 and MXPA12

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Carpet Floor Mat Set suitable for Toyota Yaris GR Four

Protect the passenger cabin floor carpet of your Toyota Yaris GR4 with a plush pile carpet mat set from Koromo Heritage.

Suited specifically to the GR Yaris GXPA16 also known as a GRFour Yaris this carpet mat set in plush or loop pile has been made in Australia to the highest quality.

Available in 14 different colours and you can select from one of eight edge binding colour that we offer.

No similar product is available as an OEM part - now you can complete your Toyota GR Yaris in style with these floor mats from Koromo Heritage.

Shipping worldwide weekly - no problems for overseas buyers.

$190.00
NOTE! This item is Made To Order
* Carpet Colour:

* Edge Binding Colour:

* Carpet Pile:

Cargo Area Tough Mat (Full Sized) suitable for Toyota GR Yaris

Cargo area 'tough mat' for your Toyota GR Yaris. 

You may also know this product as a luggage area mat or trunk mat for your GR Yaris.

Suited specifically to the GR Yaris GXPA16 also known as a GRFour Yaris this cargo area tough mat has been made in Australia to the highest quality.

Available in two colours. This full sized mat will cover the whole cargo area when the rear seat of your Toyota GR Yaris is folded down. Our tough mats are trimmed and made from a tough wearing material to match the interior of your Toyota GR Yaris and protect the floor of your GR Yaris. Perfect for dog owners, the golf clubs and buggy or perhaps if you drive your track day GR Yaris to the track our mat is perfect for loading in your spare set of wheels and tyres that you only use on the track!

Complete your Toyota GR Yaris in style with this full sized cargo area tough mat from Toyota Heritage.

Shipping worldwide weekly - no problems for overseas buyers.

$260.00
NOTE! This item is Made To Order
* Colour - Tough Mat:

Door Card Side Trim Panel and Fascia Clips Pack suitable for various Toyota models (TH0379)

Door card, side trim panel and fascia fastener clip pack to suit various Toyota models - Caldina, Celica, Corolla, Corona, Supra, MR2, Soarer, Prado, Yaris, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door as well as other interior trim and fascia panels.

These are a push in clip that have a fit to a 9mm hole size and measure 12.8mm ( top head diameter), 15.6mm (centre head diameter) , 17.7mm (bottom head diameter) with a stem length of 14.2mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, CT216, ET196, ST190, ST191, ST195, ST198
  • AT211, ST210, ST215

 Toyota Celica 

  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE91, AE92, AE95, CE90, EE90
  • AE100, AE101, AE102, AE103, AE104, CE100, CE101, CE104, EE100, EE101
  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
  • CDE120, ZRE120, ZZE120, ZZE121, ZZE122 and ZZE123

 Toyota Corona

  • YT140

 Toyota Hilux

  • KDN145, LN140, LN141, LN145, LN147, RZN142, RZN144, RZN147, RZN148, RZN149
  • KDN150, KDN151, LN150, LN152,
  • KDN165, KDN166, KZN165, LN166, LN167
  • KDN170, LN170, LN171, LN172, RZN173, RZN174, VZN172
  • KDN190, KZN190, LN192 and RZN194

  Toyota Supra

  • MA61, MA63

Toyota Land Cruiser 

  • BJ60, FJ62, HJ60
  • BJ73, FJ70, FJ73, FJ75, FZJ70, FZJ71, FZJ73, FZJ74, FZJ75, FZJ78, FZJ79, HDJ78, HDJ79, HJ75, HZJ70, HZJ71, HZJ73, HZJ74, HZJ75, HZJ76, HZJ77, HZJ78, HZJ79, KZJ70, KZJ71, KZJ73, KZJ77, KZJ78, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ75, PZJ77, RJ70, RJ73, RJ77
  • FJ80, FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota MR2 

  • SW20 and SW21

Toyota Soarer

  • JZZ30, UZZ30, UZZ31 and UZZ32

Toyota Supra

  • JZA80

Toyota Yaris 

  • NCP10, NCP11, NCP12, NCP13, NLP10, SCP10
  • NCP20
  • EP80, EP81, EP82, EP85, NP80
  • EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Inner Guard (Fender) Fastener Clip Pack suitable for various Toyota models (TH0385)

Inner guard (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Camry, MR2, Carina, Caldina

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

 Toyota MR2

  • AW10 and AW11
  • SW20 and SW21
  • ZZW30

Toyota GR Four Yaris

  • GXPA16

Toyota Corolla

  • AE81, AE82, AE85 and AE86
  • AE90, AE92, AE93, AE94, AE95 and AE96
  • AE101, AE102 and AE112 

 Toyota Camry

  • SV10, SV11, SV12, CV10 and CV11
  • SV20, SV21 and SV22

Toyota Caldina 

  • ST191, ST195 and ST198

 Toyota Carina

  • TA40, TA41, TA42, TA47, TA57, RA40, RA45, RA46, RA55 and RA56
  • AA60, KA67V, AA63, TA60, TA61, TA67V, TA62, TA63, RA63, CA60 and CA67V
  • ST162
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V
  • AT192, AT190, AT191, ST190, ST195, CT190 and CT195
  • AAT212, AT210, AT211, ST210, ST215, CT210, CT215, CT211 and CT216

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$25.00
* Pack size: