Spare parts suitable for Toyota Crown S60 S70 Series

NOS and reproduction spare parts suitable for Toyota Crown S60 and S70 series fourth generation models built from 1971 to 1974

ASCO Brake Booster decal suitable for various Toyota models

This decal was applied to Toyota vehicles through out the 1970's and early 1980's, and denoted the licenced use of ASCO disc brake technology by Toyota.

Complete your Toyota Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

Factory Auxiliary Driving Light Lenses suitable for various Toyota models

Complete your early Toyota restoration project in style with a pair of reproduction lenses to suit your early style factory Toyota Motor Corp auxiliary ('driving') lights.

Replaces original Koito part number L2589.

Mostly fitted to Toyota Stout and Toyota Land Cruiser these were also fitted as factory auxiliary driving lights on Crown, Corolla, Corona, Mark ii, and Hilux just to name a few other models.

You may find that your original lense is missing or cracked. These wonderful reproduction lenses are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers

$70.00

M Engine 9mm Ignition Lead Kit suitable for Toyota Corona and Toyota Crown (TH9616)

Genuine Eagle brand 9mm ignition leads to suit your Toyota Corona Mark ii or Toyota Crown fitted with an M or 2M engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the M and 2M engines.

Suits 2.0L M SOHC Corona models as follows:

  • MX10, MX20 and MX27

Suits 2.3L 2M SOHC Corona models as follows:

  • MX12, MX22 and MX28

Suits 2.6L 4M SOHC Corona and Crown models as follows:

  • Corona - MX13 and MX23
  • Crown - MS65, MS83, MS85 and MS111

 General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$120.50

Moulded Carpet Set suitable for Toyota Crown MS70 MS75 Coupe

Front and rear moulded floor carpet for your fourth generation MS70 or MS75 Toyota Crown coupe. 

Suited to all Toyota Crown MS70 and MS75 coupe built between 1971 to 1974 our moulded carpets are well fitting and made in Australia to the highest quality.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

Available in Right Hand Drive (RHD) or Left Hand Drive (LHD) - simply use the drop down menu to select.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fourth gen' Toyota Crown coupe project in style - whether its a retro-ride, daily driver or detailed restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$320.00
NOTE! This item is Made To Order
* Carpet Colour:

* Carpet Pile:

* Driver Side:

TEQ Build Plate Early Models to 1974 Japan Delivery

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate for vehicles with original delivery in Japan.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the period from February 1970 to december 1974. Generally these were used up till December 1974, but this may vary on some models and for some cars sold in January 1975.

We have seen these on Crown, Corolla, Corona, Stout, Publica, and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

TEQ Build Plate early models to 1974

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the mid and late 1960's and early 1970's. Generally these were used up till December 1974, but this may vary in some countries.

We have seen these on Crown, Corolla, Corona, Mark ii, Stout, Publica, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

AMI Build Plate suitable for Toyota Crown Corolla Corona Tiara

Complete your early Toyota restoration project with this reproduction AMI Build Plate.

These AMI Build Plates were fitted in the engine bay of all early model Toyota's built during the 1960's and early 1970's at the Australian Motor Industries Port Melbourne facility. Used extensively on Crown, Corolla, Corona and Tiara models they had a unique number that allowed AMI to keep track of the bodies it had built for Toyota.

Often many cars  have lost this plate or when an owner has removed it for painting the original plate has been deformed. Toyota Heritage's reproduction part is exacting in every detail. 

These AMI Build Plates compliment Toyota Heritage's reproduction TEQ Build plate and York Stock plate very nicely and adds that finishing touch to the engine bay of yoru early model Toyota for an authentic restoration.

The pricing includes having your car's unique build number applied to the plate before we ship it to you. 

$80.00

4M Engine Valve Clearance Decal suitable for Toyota Crown and Mark ii

Reproduction valve clearance decal for Toyota models with 4M engines.

Suits models with 4M engines as follows:

  • Toyota Crown MS65, MS68V, MS75
  • Toyota Crown MS80, MS90, MS100
  • Toyota Mark ii MX12, MX22, MX28, MX32, MX36

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$10.00

Toyo Radiator Co Decal suitable for various Toyota models

This decal was applied to all Japanese built Toyota models throughout the late 1960's to 1980.

This included modesl such as Land Cruiser (FJ40, FJ45, FJ55 etc), Hilux (RN15, RN25 etc), Crown (MS55, MS60, MS70, MS80 etc), Celica (A20 series) and Corolla (E20 and E30 series).

Complete your classic Toyota Restoration in style with this decal that is applied to the top face of the radiator adjacent to the radiator cap.

Fitted at the very top of the radiator, this decal is most visible immediately when the bonnet (hood) is opened and provides that finishing touch to a resto.

Often the original decal may have been removed when the radiator was reconditioned, replaced or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

AMI Paint Code Decal 1969-1971 M to W Lustrelife suitable for Toyota Crown Corolla Corona

All colours available from 1969 to 1971.

Complete your early Toyota restoration project in complete style!

These AMI Lustrelife paint colour decals were fitted in the engine bay of all early model Toyota's built during 1969 to 1971. These were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Our decals are correct in every detail including artwork, colour names and paint codes.

Colours used by AMI and included in our range of decals to chose from are:

  • Apple
  • Bronze Metallic
  • Caribbean
  • Cirrus Grey
  • Columbine Blue
  • Cornflower
  • Cream
  • Deep Russet
  • Desert Beige
  • Havana Gold
  • Hayman Blue
  • Marina Turquoise
  • Midnight Blue
  • Mocca
  • Peak White
  • Signal Red
  • Sirius White
  • Targa Pearl Metallic
  • White 
  • Willow

Often many cars have lost this decal when an owner has removed it for painting the original decal has been torn or lost.

If you cannot find your colour in the decals with have listed please contact us at Toyota Heritage.

We can also assist in identifying the colour of your car if you are unsure which decal to purchase.

These decals were also fitted to Rambler (Matador, Rebel, Hornet, American etc), Triumph (Herald, 2000, 2000PI, 2500TC etc) and AMC (Javelin, AMX etc). 

 

$6.50
* paint color name:

2M 4M Engine Valve Clearance Decal suitable for Toyota Crown and Mark ii

Reproduction valve clearance decal for Toyota models with 4M engines.

Suits models with 4M engines as follows:

  • Toyota Crown MS45B
  • Toyota Crown MS50, MS51, MS52, MS53, MS56
  • Toyota Crown MS64, MS67
  • Toyota Mark ii MX12, MX22, MX28

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$12.00

Moulded Carpet suitable for Toyota Crown S60 Series

Front and rear moulded floor carpet for your fourth generation S60 series Toyota Crown. 

Suited to all Toyota Crown S60 series built between 1971 to 1974 our moulded carpets are well fitting and made in Australia to the highest quality.

Suits all sedan and wagon models in the series including RS60, RS66V, MS60, MS62, MS66V, MS64, MS67V, MS65 and MS68V.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fourth gen' Toyota Crown project in style - whether its a retro-ride, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$320.00
NOTE! This item is Made To Order
* Carpet Colour:

* Carpet Pile:

* Driver Side:

Dealership Stock Plate (York Motors) suitable for Toyota Corolla Crown Corona Tiara

Complete your early Toyota restoration project with an authentic type York Motors Toyota dealership stock plate plate.

These Stock Plates were fitted in the engine bay of all early model Toyota's built during the 1960's and early 1970's. Used extensively on locally built AMI cars but also on fully imported models and this included Crown, Corolla, Sprinter, Corona, Mark ii, Tiara and Publica.

Often many cars that were sold through York Motors have lost this plate or when an owner has removed it for painting the original plate has been deformed.

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

Compliments our TEQ Build plate very nicely adding those finishing touches to the engine bay for an authentic restoration.

The pricing includes having your car's unique stock number applied to the plate before we ship it to you.

$75.00

AMI Paint Code Decal 1969-1971 A to H Lustrelife suitable for Toyota Crown Corolla Corona

All colours from 1969 to 1971 available.

Complete your early Toyota restoration project in complete style!

These AMI Lustrelife paint colour decals were fitted in the engine bay of all early model Toyota's built during 1969 to 1971. These were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Our decals are correct in every detail including artwork, colour names and paint codes.

Colours used by AMI and included in our range of decals to chose from are:

  • Apple
  • Bronze Metallic
  • Caribbean
  • Cirrus Grey
  • Columbine Blue
  • Cornflower
  • Cream
  • Deep Russet
  • Desert Beige
  • Havana Gold
  • Hayman Blue
  • Marina Turquoise
  • Midnight Blue
  • Mocca
  • Peak White
  • Signal Red
  • Sirius White
  • Targa Pearl Metallic
  • White 
  • Willow

Often many cars have lost this decal when an owner has removed it for painting the original decal has been torn or lost.

If you cannot find your colour in the decals with have listed please contact us at Toyota Heritage.

We can also assist in identifying the colour of your car if you are unsure which decal to purchase.

These decals were also fitted to Rambler (Matador, Rebel, Hornet, American etc), Triumph (Herald, 2000, 2000PI, 2500TC etc) and AMC (Javelin, AMX etc). 

 

$6.50
* paint color name:

5R Engine Valve Clearance Decal suitable for Toyota Crown Stout ToyoAce Coaster and Dyna

Reproduction valve clearance decal for Toyota models with 5R engines.

Suits models with 5R engines as follows:

  • Toyota Crown RS50, RS51, RS53, RS56
  • Toyota Crown RS60, RS66V
  • Toyota Stout RK101 
  • Toyota ToyoAce RY20
  • Toyota Coaster RU18, RU19 (1969 - 1977)
  • Toyota Dyna RU10, RU20, RU30

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$12.00

AMI Paint Code Decal 1973 Dulon suitable for Toyota Crown Corolla Corona

All colours available in 1973.

Complete your early Toyota restoration project in complete style!

These AMI Dulon paint colour decals were fitted in the engine bay of all early model Toyota's built during 1973. These were applied to the Port Melbourne (Australia) assembled Celica, Crown, Corolla, Mark ii and Corona.

Our decals are correct in every detail including artwork, dimensions, colour names and paint codes.

Colours used by AMI and included in our range of decals to chose from are:

  • Avocado Green
  • Big Bad Orange
  • Butterscotch
  • Canary Yellow
  • Caribbean
  • Cream
  • Mocca
  • Sienna
  • Signal Red
  • White
  • Willow

Often many cars have lost this decal when an owner has removed it for painting the original decal has been torn or lost.

If you cannot find your colour in the decals with have listed please contact us at Toyota Heritage.

We can also assist in identifying the colour of your car if you are unsure which decal to purchase.

These decals were also fitted to Rambler (Matador, Rebel, Hornet, American etc), Triumph (Herald, 2000, 2000PI, 2500TC etc) and AMC (Javelin, AMX etc). 

 

$8.50
* paint color name:

Window Regulator Seal suitable for various Toyota models

Complete your early Toyota restoration project!

These seals were fitted between the inside of the door frame and the window regulator/winder mechanism of Toyota's built during the 1960's and early 1970's. We have seen these on Crown, Corolla, Corona, Mark ii and Landcruiser just to name a few models.

These stop vibration and 'wobble' of your window winder handle and help eliminate rattles.

Our reproduction part is exacting in every detail.

$10.00

Warning Decal (Genuine Parts) suitable for Toyota Corolla Crown Corona

Complete your early Toyota restoration project in style with a Genuine Parts Warning decal.

These 'Genuine Parts Warning' decals were located on the aircleaner assembly or rocker cover of all early model Toyota's built during the 1960's and early 1970's at Australian Motor Industries (AMI). These decals were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Often many cars have lost this decal over their life as past owners may removed them for painting or the decal was simply torn or lost.

The decal advises buyers that genuine parts are made with the same quality as the originals and should always be used.

Completed on an original high chrome type material and using precision fonts this decal is an exact replica of those fitted back in the day.

 

 

$9.50