Spare parts suitable for Toyota Crown S50 Series

NOS and reproduction spare parts suitable for Toyota Crown S50 series third generation models built from 1967 to 1971

ASCO Brake Booster decal suitable for various Toyota models

This decal was applied to Toyota vehicles through out the 1970's and early 1980's, and denoted the licenced use of ASCO disc brake technology by Toyota.

Complete your Toyota Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

TEQ Build Plate early models to 1974

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the mid and late 1960's and early 1970's. Generally these were used up till December 1974, but this may vary in some countries.

We have seen these on Crown, Corolla, Corona, Mark ii, Stout, Publica, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

Warning Decal (Genuine Parts) suitable for Toyota Corolla Crown Corona

Complete your early Toyota restoration project in style with a Genuine Parts Warning decal.

These 'Genuine Parts Warning' decals were located on the aircleaner assembly or rocker cover of all early model Toyota's built during the 1960's and early 1970's at Australian Motor Industries (AMI). These decals were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Often many cars have lost this decal over their life as past owners may removed them for painting or the decal was simply torn or lost.

The decal advises buyers that genuine parts are made with the same quality as the originals and should always be used.

Completed on an original high chrome type material and using precision fonts this decal is an exact replica of those fitted back in the day.

 

 

$9.50

Tail Lamp Lenses suitable for Toyota Crown S50 series wagon or pick-up late build USDM NAM

Complete your third generation Toyota Crown S50 series ute (pick-up) or wagon project in style!

Pair of rear tail light lenses for the S50 series Toyota Crown station wagon ('estate wagon') or pick-up ('ute'). Suits the S53 and S56 variants with either the M or R engines.

Will also fit Masterline pick-ups for the S50 series.

This lovely red and clear type lense was used in USA, Mexico and Canada delivered vehicles as well as Latin America.

These lenses are increasingly harder to find as NOS and our reproductions are Australian made using the highest quality tooling and are faithful reproductions.

Look great in a vintage restoration project, retro ride, drift mobile or just an every day driver.

Ship worldwide every week - no problems for international buyers.

$190.00
1 In Stock

Toyo Radiator Co Decal suitable for various Toyota models

This decal was applied to all Japanese built Toyota models throughout the late 1960's to 1980.

This included modesl such as Land Cruiser (FJ40, FJ45, FJ55 etc), Hilux (RN15, RN25 etc), Crown (MS55, MS60, MS70, MS80 etc), Celica (A20 series) and Corolla (E20 and E30 series).

Complete your classic Toyota Restoration in style with this decal that is applied to the top face of the radiator adjacent to the radiator cap.

Fitted at the very top of the radiator, this decal is most visible immediately when the bonnet (hood) is opened and provides that finishing touch to a resto.

Often the original decal may have been removed when the radiator was reconditioned, replaced or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

TEQ Build Plate Early Models to 1970 Japan Delivery

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate for vehicles with original delivery in Japan.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the mid and late 1960's and up to the year of 1970. Generally these were used up till December 1970, but this may vary on some models and for some cars sold in January 1971.

We have seen these on Crown, Corolla, Corona, Stout, Publica, and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

AMI Build Plate suitable for Toyota Crown Corolla Corona Tiara

Complete your early Toyota restoration project with this reproduction AMI Build Plate.

These AMI Build Plates were fitted in the engine bay of all early model Toyota's built during the 1960's and early 1970's at the Australian Motor Industries Port Melbourne facility. Used extensively on Crown, Corolla, Corona and Tiara models they had a unique number that allowed AMI to keep track of the bodies it had built for Toyota.

Often many cars  have lost this plate or when an owner has removed it for painting the original plate has been deformed. Toyota Heritage's reproduction part is exacting in every detail. 

These AMI Build Plates compliment Toyota Heritage's reproduction TEQ Build plate and York Stock plate very nicely and adds that finishing touch to the engine bay of yoru early model Toyota for an authentic restoration.

The pricing includes having your car's unique build number applied to the plate before we ship it to you. 

$80.00

Tail Lamp Lenses suitable for Toyota Crown S50 Series Wagon and Pick-up 1969 to 1971

Reproduction tail light lenses for your third generation S50 series Toyota Crown wagon or pick-up (ute). 

Suited to all Toyota Crown late build RS53, RS56, MS53 and MS46 built between 1969 to 1971 these lenses are faithful reproductions made in Australia to the highest quality.

These lenses were fitted to the rear of the S50 series Toyota Crown wagon and pick-up (ute) delivered to Japan, Europe, Australia, New Zealand and on very late production USA and Canada delivered vehicles including the Masterline range.

Complete your 'third gen' Toyota Crown project in style - whether its a retro-ride, drift car, daily driver, restoration project, work horse or shop truck!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$190.00
3 In Stock

Dealership Stock Plate (York Motors) suitable for Toyota Corolla Crown Corona Tiara

Complete your early Toyota restoration project with an authentic type York Motors Toyota dealership stock plate plate.

These Stock Plates were fitted in the engine bay of all early model Toyota's built during the 1960's and early 1970's. Used extensively on locally built AMI cars but also on fully imported models and this included Crown, Corolla, Sprinter, Corona, Mark ii, Tiara and Publica.

Often many cars that were sold through York Motors have lost this plate or when an owner has removed it for painting the original plate has been deformed.

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

Compliments our TEQ Build plate very nicely adding those finishing touches to the engine bay for an authentic restoration.

The pricing includes having your car's unique stock number applied to the plate before we ship it to you.

$75.00
Six Row Fuse Box suits early model Toyota

Six Row Fuse Box suitable for various early Toyota models

Complete your 'old school' Toyota project with this reproduction factory six row fuse box.

Complete with a cover that displays correct fuse allocation and TEQ logo, this suits all early model Toyota vehicles including:

  • Landcruiser early BJ, HJ and FJ
  • Crown MS40 RS40 series
  • Corona RT40 series
  • Publica
  • Stout

This is high quality replacement product that will help your car's electrical system come back to life.

Bolts straight into most models and overcomes problems with broken fuse housings.

Worldwide shipping weekly - no problems for overseas buyers.

$65.00
NOTE! This is a Non Stock Item

M Engine 9mm Ignition Lead Kit suitable for Toyota Crown (TH9615)

Genuine Eagle brand 9mm ignition leads to suit your Toyota Crown fitted with an M or 2M engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the M and 2M engines.

Suits 2.0L M SOHC Crown models as follows:

  • MS41, MS45, MS46 and MS47

Suits 2.3L 2M SOHC Crown models as follows:

  • MS45B
  • MS53, MS55 and MS57

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$115.50

Side Marker Lenses suitable for Toyota Crown S50 Series 1969 to 1971

Reproduction side marker lenses for your third generation S50 series Toyota Crown.

Suited to all Toyota Crown late build RS50, MS50, RS56, MS56, MS51, RS51, MS53, RS53, MS55, RS55, MS57 and RS57 built between 1969 to 1971 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito parts 30-6L (left side) and 30-6R (right side).

Available in either original style amber or custom clear these lenses were fitted to the fender (mud guard) of the S50,sedan, wagon, pick-up (ute) and coupe variants of the S50 series third generation Toyota Crown.

Complete your 'third gen' Toyota Crown project in style - whether its a retro-ride, drift car, daily driver, restoration project or resto-mod!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$80.00
* lense colour options:

Window Regulator Seal suitable for various Toyota models

Complete your early Toyota restoration project!

These seals were fitted between the inside of the door frame and the window regulator/winder mechanism of Toyota's built during the 1960's and early 1970's. We have seen these on Crown, Corolla, Corona, Mark ii and Landcruiser just to name a few models.

These stop vibration and 'wobble' of your window winder handle and help eliminate rattles.

Our reproduction part is exacting in every detail.

$10.00

AMI Paint Code Decal 1969-1971 M to W Lustrelife suitable for Toyota Crown Corolla Corona

All colours available from 1969 to 1971.

Complete your early Toyota restoration project in complete style!

These AMI Lustrelife paint colour decals were fitted in the engine bay of all early model Toyota's built during 1969 to 1971. These were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Our decals are correct in every detail including artwork, colour names and paint codes.

Colours used by AMI and included in our range of decals to chose from are:

  • Apple
  • Bronze Metallic
  • Caribbean
  • Cirrus Grey
  • Columbine Blue
  • Cornflower
  • Cream
  • Deep Russet
  • Desert Beige
  • Havana Gold
  • Hayman Blue
  • Marina Turquoise
  • Midnight Blue
  • Mocca
  • Peak White
  • Signal Red
  • Sirius White
  • Targa Pearl Metallic
  • White 
  • Willow

Often many cars have lost this decal when an owner has removed it for painting the original decal has been torn or lost.

If you cannot find your colour in the decals with have listed please contact us at Toyota Heritage.

We can also assist in identifying the colour of your car if you are unsure which decal to purchase.

These decals were also fitted to Rambler (Matador, Rebel, Hornet, American etc), Triumph (Herald, 2000, 2000PI, 2500TC etc) and AMC (Javelin, AMX etc). 

 

$6.50
* paint color name:

2M 4M Engine Valve Clearance Decal suitable for Toyota Crown and Mark ii

Reproduction valve clearance decal for Toyota models with 4M engines.

Suits models with 4M engines as follows:

  • Toyota Crown MS45B
  • Toyota Crown MS50, MS51, MS52, MS53, MS56
  • Toyota Crown MS64, MS67
  • Toyota Mark ii MX12, MX22, MX28

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$12.00

Side Marker Housings and Lenses suitable for Toyota Crown S50 Series 1969 to 1971

Reproduction side marker housing and lenses for your third generation S50 series Toyota Crown. 

Suited to all Toyota Crown late build RS50, MS50, RS56, MS56, MS51, RS51, MS53, RS53, MS55, RS55, MS57 and RS57 built between 1969 to 1971 these lenses are faithful reproductions made in Australia to the highest quality and replace original Koito parts 30-6L (left side) and 30-6R (right side).

Available in either original style amber or custom clear these lenses were fitted to the fender (mud guard) of the S50,sedan, wagon, pick-up (ute) and coupe variants of the S50 series third generation Toyota Crown.

Complete your 'third gen' Toyota Crown project in style - whether its a retro-ride, drift car, daily driver, restoration project or resto-mod!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers. 

$175.00
NOTE! This item is Made To Order
* lense colour options:

Factory Auxiliary Driving Light Lenses suitable for various Toyota models

Complete your early Toyota restoration project in style with a pair of reproduction lenses to suit your early style factory Toyota Motor Corp auxiliary ('driving') lights.

Replaces original Koito part number L2589.

Mostly fitted to Toyota Stout and Toyota Land Cruiser these were also fitted as factory auxiliary driving lights on Crown, Corolla, Corona, Mark ii, and Hilux just to name a few other models.

You may find that your original lense is missing or cracked. These wonderful reproduction lenses are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers

$70.00

AMI Paint Code Decal 1969-1971 A to H Lustrelife suitable for Toyota Crown Corolla Corona

All colours from 1969 to 1971 available.

Complete your early Toyota restoration project in complete style!

These AMI Lustrelife paint colour decals were fitted in the engine bay of all early model Toyota's built during 1969 to 1971. These were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Our decals are correct in every detail including artwork, colour names and paint codes.

Colours used by AMI and included in our range of decals to chose from are:

  • Apple
  • Bronze Metallic
  • Caribbean
  • Cirrus Grey
  • Columbine Blue
  • Cornflower
  • Cream
  • Deep Russet
  • Desert Beige
  • Havana Gold
  • Hayman Blue
  • Marina Turquoise
  • Midnight Blue
  • Mocca
  • Peak White
  • Signal Red
  • Sirius White
  • Targa Pearl Metallic
  • White 
  • Willow

Often many cars have lost this decal when an owner has removed it for painting the original decal has been torn or lost.

If you cannot find your colour in the decals with have listed please contact us at Toyota Heritage.

We can also assist in identifying the colour of your car if you are unsure which decal to purchase.

These decals were also fitted to Rambler (Matador, Rebel, Hornet, American etc), Triumph (Herald, 2000, 2000PI, 2500TC etc) and AMC (Javelin, AMX etc). 

 

$6.50
* paint color name:

5R Engine Valve Clearance Decal suitable for Toyota Crown Stout ToyoAce Coaster and Dyna

Reproduction valve clearance decal for Toyota models with 5R engines.

Suits models with 5R engines as follows:

  • Toyota Crown RS50, RS51, RS53, RS56
  • Toyota Crown RS60, RS66V
  • Toyota Stout RK101 
  • Toyota ToyoAce RY20
  • Toyota Coaster RU18, RU19 (1969 - 1977)
  • Toyota Dyna RU10, RU20, RU30

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$12.00

Tail Light Lenses suitable for Toyota Crown S50 series wagon/pick-up MS56 RS56 1967 to 1969

Reproduction lenses to suit and complete your 'old school' Toyota Crown project in style!

Set of six rear tail light, reversing and indicator lenses suitable for the S50 series Toyota Crown station wagon ('estate wagon') or pick-up ('ute') - MS56 and RS56 early builds (1967 to 1969).

Replaces red sections - Koito 2495L (left side) and L2495R (right side).

Replaces amber sections - Koito 2494L (left side) and L2494R (right side).

Replaces clear sections - Koito L2496L (left side) and L2496R (right side)

These lenses are increasingly harder to find as NOS and our reproductions are Australian made using the highest quality tooling and are faithful reproductions.

 

Look great in a vintage restoration project, retro ride, drift mobile or just an every day driver.

 

Ship worldwide every week - so no problems for international buyers.

 

 

$250.00
1 In Stock