Toyota Cressida Parts

New Old Stock and reproduction spare parts for Toyota Cressida

Toyota 18R Engine Build Plate

Available for Toyota models with 18R or 18RC engines (select from drop down box).

These plates suit various Toyota models including:

  • Toyota Celica RA20, RA21 and RA22 (18R engine)
  • Toyota Celica RA23, RA24, RA25, RA28, RA29, RA40, RA45 and RA55 (18R-C engine)
  • Toyota Corona RT85, RT95, RT89V, RT104, RT114, RT118, RT122 and RT132 (18R engine)
  • Toyota Corona RT132 (18R-C engine)
  • Toyota Mark ii RX12, RX22, RX28, RX30, RX32, RX35, RT63, RT73, RT78 and RT79 (18R-C engine)
  • Toyota Hilux RN22 and RN27 (18R engine)

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly. No problems for overseas buyers.

$80.00
* engine model:

Toyota M Engine 9mm Ignition Lead Kit (TH9616)

Genuine Eagle brand 9mm ignition leads to suit your Toyota Corona Mark ii or Toyota Crown fitted with an M or 2M engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the M and 2M engines.

Suits 2.0L M SOHC Corona models as follows:

  • MX10, MX20 and MX27

Suits 2.3L 2M SOHC Corona models as follows:

  • MX12, MX22 and MX28

Suits 2.6L 4M SOHC Corona and Crown models as follows:

  • Corona - MX13 and MX23
  • Crown - MS65, MS83, MS85 and MS111

 General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$120.50

Toyota 6R Engine Valve Clearance Decal

Reproduction valve clearance decal for Toyota models with 6R engines.

Suits models with 6R engines as follows:

  • Toyota Corona RT84, RT94 (1970 - 1973)
  • Toyota Mark ii RX16V

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$12.00

Toyota 2M 4M Engine Valve Clearance Decal

Reproduction valve clearance decal for Toyota models with 4M engines.

Suits models with 4M engines as follows:

  • Toyota Crown MS45B
  • Toyota Crown MS50, MS51, MS52, MS53, MS56
  • Toyota Crown MS64, MS67
  • Toyota Mark ii MX12, MX22, MX28

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$12.00

Toyota Head Lamp and Grille Fastener Clip Pack TH0330

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

  • KE10, KE11, KE15, KE16, KE17 and KE18
  • KE20, KE25, TE21, TE25, TE27 and TE26
  • KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
  • TE72
  • AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

  • FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

  • KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

  • TA10
  • KA67
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

  • TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
  • TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

  • All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Mark ii X10 and X20 Series Moulded Carpet

Front and rear moulded floor carpet for your second generation X10 or X20 series Toyota Mark ii. 

Suited to all RHD Toyota Cressida X30 and X40 series built between 1974 to 1977 including  MX10, MX12, MX13, M20, MX22, MX23, MX27, MX28, MX29, RX10, RX11, RX15, RX16V, RX17, RX20, RX21V, RX22, RX26 and RX27. our moulded carpets are well fitting and made in Australia to the highest quality and replaces OEM carpets nicely.

Also suits Toyota Chaser and Toyota Cressida of the same model numbers and build years.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'second gen' Toyota Mark ii project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$240.00
* Carpet Colour:

* Carpet Pile:

AMI Build Plate

Complete your early Toyota restoration project with this reproduction AMI Build Plate.

These AMI Build Plates were fitted in the engine bay of all early model Toyota's built during the 1960's and early 1970's at the Australian Motor Industries Port Melbourne facility. Used extensively on Crown, Corolla, Corona and Tiara models they had a unique number that allowed AMI to keep track of the bodies it had built for Toyota.

Often many cars  have lost this plate or when an owner has removed it for painting the original plate has been deformed. Toyota Heritage's reproduction part is exacting in every detail. 

These AMI Build Plates compliment Toyota Heritage's reproduction TEQ Build plate and York Stock plate very nicely and adds that finishing touch to the engine bay of yoru early model Toyota for an authentic restoration.

The pricing includes having your car's unique build number applied to the plate before we ship it to you. 

$80.00

Toyota 4M Engine Valve Clearance Decal

Reproduction valve clearance decal for Toyota models with 4M engines.

Suits models with 4M engines as follows:

  • Toyota Crown MS65, MS68V, MS75
  • Toyota Crown MS80, MS90, MS100
  • Toyota Mark ii MX12, MX22, MX28, MX32, MX36

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$10.00

Toyota Dealership Stock Plate - York Motors

Complete your early Toyota restoration project with an authentic type York Motors Toyota dealership stock plate plate.

These Stock Plates were fitted in the engine bay of all early model Toyota's built during the 1960's and early 1970's. Used extensively on locally built AMI cars but also on fully imported models and this included Crown, Corolla, Sprinter, Corona, Mark ii, Tiara and Publica.

Often many cars that were sold through York Motors have lost this plate or when an owner has removed it for painting the original plate has been deformed.

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

Compliments our TEQ Build plate very nicely adding those finishing touches to the engine bay for an authentic restoration.

The pricing includes having your car's unique stock number applied to the plate before we ship it to you.

$75.00
6 In Stock