Toyota Corona T140 Series Parts

Spare parts for Toyota Corona including AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V

Toyota Door Card Trim Panel Clips Pack TH0176

Door card fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Supra, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door.

These are a push in clip that have a fit to a 9mm hole and have a T1 13mm head diameter with a stem length of 14mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica 

  • AA63, GA61, RA60, RA61, RA63, RA64, RA65, SA60, SA63, TA60, TA61, TA63, TA64
  • AT160, ST160, ST161, ST162, ST163, ST165 
  • AT180, ST182, ST183, ST184 and ST185

Toyota Corolla

  • KE30, KE35, KE36, KE38, TE31, TE37, TE38
  • TE47
  • KE50, KE55, TE51,
  • AE70, AE71, CE70, CE71, CE72, KE70, KE71, KE72, KE73, KE74, TE70, TE71, TE72, TE73, TE74
  • AE80, AE81, AE82, AE85, AE86, CE80, EE80

 Toyota Corona

  • AT140, AT141, CT140, CT141, CT147, KT147, RT141, ST140, TT142, TT147, YT140

 Toyota Hilux

  • LN50, LN51, LN55, LN56, LN57, RN50, RN55, RN58, YN50, YN51, YN52, YN55, YN56, YN57, YN58
    LN60, LN61, LN65, RN60, RN61, RN66, RN67, VZN61, VZN66, YN60, YN61G, YN61V, YN62, YN63, YN65, YN67
    RN70, RN75

 Toyota Supra

  • MA61, MA63

Toyota Land Cruiser 

  • BJ40, BJ41, BJ42, BJ44, BJ45, BJ46, FJ40, FJ45, HJ47
  • BJ60, BJ61, FJ60, FJ61, FJ62, FJ62G, FJ62V, HJ60, HJ61
  • BJ70, BJ71, BJ73, BJ74, BJ75, FJ70, FJ73, FJ75, HJ75, LJ75, LJ70, LJ71, LJ73, RJ70, RJ73 

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota 18RG 8mm lead kit (TH84168)

Genuine Eagle brand 8mm ignition leads to suit your Toyota Celica, Toyota Corona or Toyota Carina fitted with an 18RG engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 18RG engines.

Suits 2.0L 18RG DOHC GT2000 models as follows:

  • Celica - RA25, RA28, RA40, RA45, RA50 and RA63
  • Corona - RT132 and RT141,
  • Carina - RA15, RA17, RA30, RA40, RA45, RA55, and RA63

 NOTE: Carina models were not delivered new to the Australian market but you may own a private import. These models were mostly delivered domestically in Japan plus other foreign markets such as New Zealand, Europe, North America and the Middle East. 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$85.00

Toyota Corona T140 Series Floor Mat Set

Front and rear floor carpet set for your T140 series Toyota Corona.

Suited to all RHD Toyota Corona T140 series such as AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V and TT147V built between 1983 to 1987 our carpet floor mats are styled off the OEM factory mats from an T140 Corona, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are four mats included in the set and this includes the two front foot well mats and the two rear floor well mats. 

Displayed here in 1980's brown with brown edge binding, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'seventh gen' Toyota Corona series project in style - whether its a daily driver, drift car or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$150.00
* Carpet Colour:

* Carpet Pile:

* Edge Binding Colour:

Toyota Door Card Side Trim Panel and Fascia Clips Pack TH0379

Door card, side trim panel and fascia fastener clip pack to suit various Toyota models - Caldina, Celica, Corolla, Corona, Supra, MR2, Soarer, Prado, Yaris, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door as well as other interior trim and fascia panels.

These are a push in clip that have a fit to a 9mm hole size and measure 12.8mm ( top head diameter), 15.6mm (centre head diameter) , 17.7mm (bottom head diameter) with a stem length of 14.2mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, CT216, ET196, ST190, ST191, ST195, ST198
  • AT211, ST210, ST215

 Toyota Celica 

  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE91, AE92, AE95, CE90, EE90
  • AE100, AE101, AE102, AE103, AE104, CE100, CE101, CE104, EE100, EE101
  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
  • CDE120, ZRE120, ZZE120, ZZE121, ZZE122 and ZZE123

 Toyota Corona

  • YT140

 Toyota Hilux

  • KDN145, LN140, LN141, LN145, LN147, RZN142, RZN144, RZN147, RZN148, RZN149
  • KDN150, KDN151, LN150, LN152,
  • KDN165, KDN166, KZN165, LN166, LN167
  • KDN170, LN170, LN171, LN172, RZN173, RZN174, VZN172
  • KDN190, KZN190, LN192 and RZN194

  Toyota Supra

  • MA61, MA63

Toyota Land Cruiser 

  • BJ60, FJ62, HJ60
  • BJ73, FJ70, FJ73, FJ75, FZJ70, FZJ71, FZJ73, FZJ74, FZJ75, FZJ78, FZJ79, HDJ78, HDJ79, HJ75, HZJ70, HZJ71, HZJ73, HZJ74, HZJ75, HZJ76, HZJ77, HZJ78, HZJ79, KZJ70, KZJ71, KZJ73, KZJ77, KZJ78, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ75, PZJ77, RJ70, RJ73, RJ77
  • FJ80, FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota MR2 

  • SW20 and SW21

Toyota Soarer

  • JZZ30, UZZ30, UZZ31 and UZZ32

Toyota Supra

  • JZA80

Toyota Yaris 

  • NCP10, NCP11, NCP12, NCP13, NLP10, SCP10
  • NCP20
  • EP80, EP81, EP82, EP85, NP80
  • EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

TMC Build Plate Models built after 1980 all markets

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

Toyota Bonnet Support Rod Clamp TH0460

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

  • CV10, CV11, SV10, SV11, SV12
  • MCV20, MCV21, SXV20, SXV23, SXV25
  • MCV36, ACV36
  • ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

  • TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
  • AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
  • AT160, ST160, ST161, ST162, ST163, ST165
  • AT180, ST182, ST183, ST184, ST185
  • AT200, ST202, ST203, ST204, ST205
  • ZZT230 and ZZT231 

Toyota Corona

  • RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
  • RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
  • AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
  • T160, T170, T190 series
  • T200, T210, T220 series

Toyota Cressida

  • RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
  • X60, X70 and X80 series

Toyota Carina

  • A10, A40, A60 series
  • T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

  • KE30, KE35, KE38, KE55, TE55, TE37
  • KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
  •  AE80, EE80, AE81 AE85, AE82, AE86, CE80
  • AE90, AE92, AE93, AE94, AE95, AE96
  • AE101, AE111, AE112
  • ZRE120
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

  • RN10, RN15
  • RN20, RN25
  • RN30, RN35, RN40, RN45
  • RN50, RN60, YN60, LN60, RN70, YN70, LN70
  • N80, N90, N100, N110 series
  • N120 series
  • N130 series
  • N140 series

Toyota Land Cruiser 

  • FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
  • FJ55, FJ55G, FJ55V, FJ56
  • FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
  • FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
  • HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

  • J90, J120 and J150 series

Toyota Starlet

  • KP60, KP61, KP62
  • P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$7.50
* Pack size:

Toyota Corona T140 Moulded Carpet

Front and rear moulded floor carpet for your seventh generation T140 series Toyota Corona. 

Suited to all RHD Toyota Corona T140 series built between 1983 to 1987 our moulded carpets are well fitting and made in Australia to the highest quality and replace original parts 58510-14660 (front carpet) and 58540-14190 (rear carpet).

Suits all sedan and wagon models in the series including AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V and TT147V

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'seventh gen' Toyota Corona project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$240.00
* Carpet Colour:

* Carpet Pile: