Toyota Corona T130 Series Parts

Spare parts for Toyota Corona including RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V

TMC Build Plate Models built after 1980 all markets

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

Toyota Bonnet Support Rod Clamp TH0460

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

  • CV10, CV11, SV10, SV11, SV12
  • MCV20, MCV21, SXV20, SXV23, SXV25
  • MCV36, ACV36
  • ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

  • TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
  • AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
  • AT160, ST160, ST161, ST162, ST163, ST165
  • AT180, ST182, ST183, ST184, ST185
  • AT200, ST202, ST203, ST204, ST205
  • ZZT230 and ZZT231 

Toyota Corona

  • RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
  • RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
  • AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
  • T160, T170, T190 series
  • T200, T210, T220 series

Toyota Cressida

  • RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
  • X60, X70 and X80 series

Toyota Carina

  • A10, A40, A60 series
  • T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

  • KE30, KE35, KE38, KE55, TE55, TE37
  • KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
  •  AE80, EE80, AE81 AE85, AE82, AE86, CE80
  • AE90, AE92, AE93, AE94, AE95, AE96
  • AE101, AE111, AE112
  • ZRE120
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

  • RN10, RN15
  • RN20, RN25
  • RN30, RN35, RN40, RN45
  • RN50, RN60, YN60, LN60, RN70, YN70, LN70
  • N80, N90, N100, N110 series
  • N120 series
  • N130 series
  • N140 series

Toyota Land Cruiser 

  • FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
  • FJ55, FJ55G, FJ55V, FJ56
  • FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
  • FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
  • HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

  • J90, J120 and J150 series

Toyota Starlet

  • KP60, KP61, KP62
  • P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$7.50
* Pack size:

Toyota Corona T130 Series Wagon Cargo Area Carpet Mat

Cargo area carpet for your fifth generation T130 series Toyota Corona. 

Suited to all Toyota Corona Sation Wagon T130 series built between 1978 to 1983 our carpet mats are well fitting and made in Australia to the highest quality and replace original part 58571-20020.

Suits all station wagon models in the series.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fifth gen' Toyota Corona Wagon project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$215.00
* Carpet Colour:

* Carpet Pile:

Toyota Corona T130 Moulded Carpet

Front and rear moulded floor carpet for your sixth generation T130 series Toyota Corona. 

Suited to all RHD Toyota Corona T130 series built between 1979 to 1983 our moulded carpets are well fitting and made in Australia to the highest quality and replace original parts 58510-20410 (front carpet) and 58540-20300 (rear carpet).

Suits all sedan and wagon models in the series including RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V and TT138V

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'sixth gen' Toyota Corona project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$240.00
* Carpet Colour:

* Carpet Pile:

Toyota 18RG 8mm lead kit (TH84168)

Genuine Eagle brand 8mm ignition leads to suit your Toyota Celica, Toyota Corona or Toyota Carina fitted with an 18RG engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 18RG engines.

Suits 2.0L 18RG DOHC GT2000 models as follows:

  • Celica - RA25, RA28, RA40, RA45, RA50 and RA63
  • Corona - RT132 and RT141,
  • Carina - RA15, RA17, RA30, RA40, RA45, RA55, and RA63

 NOTE: Carina models were not delivered new to the Australian market but you may own a private import. These models were mostly delivered domestically in Japan plus other foreign markets such as New Zealand, Europe, North America and the Middle East. 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$85.00