Spare parts suitable for Toyota Corona T100 T110 T120 Series

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
• ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

• KE10, KE11, KE15, KE16, KE17 and KE18
• KE20, KE25, TE21, TE25, TE27 and TE26
• KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
• TE72
• AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

• FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

• KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

• TA10
• KA67
• ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

• TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
• TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

• All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction build plate for all Toyota models with 18RG engines.

These plates suit various Toyota models known as GT2000 including:

• Toyota Celica RA24, RA25, RA28, RA40, RA45, RA55 and RA63
• Toyota Corona RT132 and RT141
• Toyota Carina RA15, RA17, RA30, RA40, RA45, RA55 and RA63
• Toyota Corona RT104, RT114, RT118 and RT122

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

Using the drop-down menu you can select:

• 18R-GU with P51 transmission
• 18R-GU with 5F1 transmission
• 18RG-EU

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly. No problems for overseas buyers.

• 18R-GEU 18R-GEU
• 18R-GU with 5F1 transmission 18R-GU with 5F1 transmission
• 18R-GU with P51 transmission 18R-GU with P51 transmission
•  

Upgrade your engine performance with this down draft manifold suitable for Toyota 18R and 8R engines.

This genuine Redline intake manifold is designed to fit two twin DCN Weber Carbs (40DCN) and will the following models:

Toyota Corona

• 8R engine - RT83 RT93 
• 18R engine - RT85, RT95, RT89V, RT104, RT114, RT118, RT122

Toyota Mark ii (including Corona Mark ii)

• 8R engine - RT62 (not DOHC), RT63, RT73, RT78, RT79, RX12, RX22, RX28 
• 18R engine - RT85, RT95, RT89V, RT104, RT114, RT118, RT122

Toyota Hilux

• 8R engine - RN10 & RN15 (USA only) 
• 18R engine - RN10 & RN15 (USA only), RN22, RN27, RN30, RN40

These Australian made high quality manifolds are made using highly developed casting and precision tooling. Made to match original specifications for mounting these will complete any project and add performance.

Koromo Heritage is also able to supply ancilliary items for fitments such as studs, gaskets and spacers as well as carburettors and airfilter assemblies - please email This email address is being protected from spambots. You need JavaScript enabled to view it. to enquire.

Shipping worldwide every week - so no problems for international buyers.

Cargo area carpet for your fifth generation T110 or T120 series Toyota Corona. 

Suited to all Toyota Corona Sation Wagon  T110 or T120 series built between 1973 to 1979 our carpet mats are well fitting and made in Australia to the highest quality and replace original part 58540-21080.

Suits all station wagon models in the series including RT116, RT117, RT118, RT119, RT122 and TT126

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fifth gen' Toyota Corona Wagon project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

Reproduction engine decal for Toyota models with 2T, 2T-B, 2T-C or 2T-G engines.

Suits 2T engined models as follows:

• Toyota Celica TA21, TA22
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30
• Toyota Corona TT100, TT106V, TT110 and TT120

Suits 2T-B engined models as follows:

• Toyota Celica TA28
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30

 Suits 2T-C engined models as follows:

• Toyota Celica TA21, TA22
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30

Suits 2T-G engined models as follows:

• Toyota Celica TA27 (1600GT versions)
• Toyota Corolla TE21, TE27 and TE28
• Toyota Carina TA12 and TA17 (1600GT versions)

These decals were fitted from the factory to the cam-shaft cover or the timing chain inspection plate for twin cam versions.

Select the decal for your engine by using the drop down menu.

Our reproduction decals are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

• 2T-B engine decal 2T-B engine decal
• 2T-C engine decal 2T-C engine decal
• 2T-G engine decal 2T-G engine decal
•  

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

• CV10, CV11, SV10, SV11, SV12
• MCV20, MCV21, SXV20, SXV23, SXV25
• MCV36, ACV36
• ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

• TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
• AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
• AT160, ST160, ST161, ST162, ST163, ST165
• AT180, ST182, ST183, ST184, ST185
• AT200, ST202, ST203, ST204, ST205
• ZZT230 and ZZT231 

Toyota Corona

• RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
• RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
• AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
• T160, T170, T190 series
• T200, T210, T220 series

Toyota Cressida

• RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
• X60, X70 and X80 series

Toyota Carina

• A10, A40, A60 series
• T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

• KE30, KE35, KE38, KE55, TE55, TE37
• KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
•  AE80, EE80, AE81 AE85, AE82, AE86, CE80
• AE90, AE92, AE93, AE94, AE95, AE96
• AE101, AE111, AE112
• ZRE120
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

• RN10, RN15
• RN20, RN25
• RN30, RN35, RN40, RN45
• RN50, RN60, YN60, LN60, RN70, YN70, LN70
• N80, N90, N100, N110 series
• N120 series
• N130 series
• N140 series

Toyota Land Cruiser 

• FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
• FJ55, FJ55G, FJ55V, FJ56
• FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
• FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
• HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

• J90, J120 and J150 series

Toyota Starlet

• KP60, KP61, KP62
• P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Reproduction valve clearance decal for Toyota models with 12R engines.

Suits models with 12R engines as follows:

• Toyota Corona RT81, RT81, RT87V
• Toyota Corona RT100, RT106V, RT110 and RT116
• Toyota Hilux RN20, RN25

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

Front and rear moulded floor carpet for your fifth generation T100, T110 or T120 series Toyota Corona. 

Suited to all Toyota Corona T100, T110 or T120 series built between 1973 to 1979 our moulded carpets are well fitting and made in Australia to the highest quality and replace original parts 58510-20080 (front carpet) and 58540-21080 (rear carpet).

Suits all sedan and wagon models in the series including RT100, RT104, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125 and TT126

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fifth gen' Toyota Corona project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•