Spare parts suitable for Toyota Corolla and Sprinter E70 Series

NOS and reproduction spare parts suitable for Toyota Corolla E70 series fourth generation models built between 1979 and 1987

ASCO Brake Booster decal suitable for various Toyota models

This decal was applied to Toyota vehicles through out the 1970's and early 1980's, and denoted the licenced use of ASCO disc brake technology by Toyota.

Complete your Toyota Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

2TG 8mm Ignition Lead Kit suitable for Toyota Celica Carina Corolla (TH84169)

Genuine Eagle brand 8mm ignition leads to suit your Toyota Celica, Toyota Corona or Toyota Carina fitted with an 18RG engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 2TG engines.

Suits 2.0L 2TG DOHC GT1600 (Celica and Carina) and Levin or Trueno (Corolla) models as follows:

  • Celica - TA23, TA27, TA28, TA40, TA45, TA60 and TA61
  • Carina - TA12, TA17, TA40, TA45 and TA60 
  • Corolla - TE21, TE27, TE28, TE37, TE51 and TE71 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$85.00

3K and 4K Fluids decal set suitable for various Toyota models

Reproduction decal set for fluids (oil and water) to suit Toyota models with 3K and 4K engines of all variants.

Suits the following Toyota vehicles fitted with a 3K or 4K engine:

  • Toyota Corolla KE30, KE35, KE38 and KE50 (Japan and Australia).
  • Toyota Corolla KE70, KE72 and KE74 (Australia only)
  • Toyota Starlet KP61 1981 to 1984

These decals were fitted to the top of the radiator cap, coolant overflow resevoir and the side of the rocker cover from the factory.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$20.00

Idler Arm suitable for Toyota Corolla E70 series

Idler arm to suit Corolla and Sprinter variants for Years 1981 to 1984.

Suited to KE70, AE70, TE70 and T18, and variants of these models.

High quality product made using high end engineering.

Get your project finished and back on the track or road.

Complete your drift machine, rat-rod, slammed, retro-car or even your daily driver.

$68.00

Door Card Trim Panel Clips Pack suitable for various Toyota models (TH0176)

Door card fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Supra, Hilux and Land Cruiser.

These clips are used to fasten side and rear door cards to the door.

These are a push in clip that have a fit to a 9mm hole and have a T1 13mm head diameter with a stem length of 14mm.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica 

  • AA63, GA61, RA60, RA61, RA63, RA64, RA65, SA60, SA63, TA60, TA61, TA63, TA64
  • AT160, ST160, ST161, ST162, ST163, ST165 
  • AT180, ST182, ST183, ST184 and ST185

Toyota Corolla

  • KE30, KE35, KE36, KE38, TE31, TE37, TE38
  • TE47
  • KE50, KE55, TE51,
  • AE70, AE71, CE70, CE71, CE72, KE70, KE71, KE72, KE73, KE74, TE70, TE71, TE72, TE73, TE74
  • AE80, AE81, AE82, AE85, AE86, CE80, EE80

 Toyota Corona

  • AT140, AT141, CT140, CT141, CT147, KT147, RT141, ST140, TT142, TT147, YT140

 Toyota Hilux

  • LN50, LN51, LN55, LN56, LN57, RN50, RN55, RN58, YN50, YN51, YN52, YN55, YN56, YN57, YN58
    LN60, LN61, LN65, RN60, RN61, RN66, RN67, VZN61, VZN66, YN60, YN61G, YN61V, YN62, YN63, YN65, YN67
    RN70, RN75

 Toyota Supra

  • MA61, MA63

Toyota Land Cruiser 

  • BJ40, BJ41, BJ42, BJ44, BJ45, BJ46, FJ40, FJ45, HJ47
  • BJ60, BJ61, FJ60, FJ61, FJ62, FJ62G, FJ62V, HJ60, HJ61
  • BJ70, BJ71, BJ73, BJ74, BJ75, FJ70, FJ73, FJ75, HJ75, LJ75, LJ70, LJ71, LJ73, RJ70, RJ73 

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Bonnet (Hood) Weather Strip Clips Pack suitable for various Toyota models (TH0391)

Radiator support to bonnet (hood) rubber seal fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Cressida, Land Cruiser, MR2, Hilux, Starlet and Supra

These clips are used to fasten the rubber strip that sits between the bonnet (hood) underside and top of the radiator support panel to reduce wind and water coming into the under bonnet (hood) area. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • All models from KE30 through to ZWE182

 Toyota Corona

  • All models from ST140 through to ST215

Toyota Cressida

  • All models from MX32 through to RX81

Toyota Hilux and Surf

  • All models from LN130 through to VZN185

Toyota Land Cruiser

  • All models from BJ60 through HZJ105

Toyota MR2

  • AW10 andAW11
  • ZZW30

 Toyota Supra

  • GA70, JZA70 and MA70
  • JZA80

Toyota Starlet

  • KP60, KP61

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

4K Valve Clearance decal suitable for various Toyota models

Reproduction valve clearance decal for Toyota models with 4K engines.

Suits 4K engined models as follows:

  • Toyota Corolla KE50, KE55 and KE50R (1978 to 1981) this included the lift back variants as well as the sedan and hard top models fitted with a 4K engine.
  • Toyota Corolla KE70 (1981 to 1983)
  • Toyota Corolla KE73G, KE71V and KE72V (Japan only)
  • Toyota Starlet KP61 (also known as Publica in some markets)

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$12.00

Pitman Arm suitable for Toyota Corolla E70 series KE70 AE71

Pitman arm to suit Corolla and Sprinter variants for Years 1981 to 1984.

Suited to KE70, AE70, TE70 and T18, and variants of these models.

High quality product made using high end engineering.

Get your project finished and back on the track or road.

Complete your drift machine, rat-rod, slammed, retro-car or even your daily driver.

$35.00

TMC Build Plate Models built after 1980 all markets

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$80.00

2T-GEU and 18R-GEU Valve Clearance decal suitable for Toyota Celica Corolla and Carina

Reproduction valce clearance decal for all Toyota models with 2T-GEU or 18R-GEU engines.

These decals are suited to the following Toyota models fitted with the 2T-GEU engine:

  • Toyota Celica TA40 and TA45
  • Toyota Corolla TE71
  • Toyota Carina TA40, TA45 and TA60

These decals are suited to the following Toyota models fitted with the 18R-GEU engine:

  • Toyota Celica GT Rally RA40, RA45 and RA55
  • Toyota Corona 2000GT RT132
  • Toyota Carina RA40, RA45, RA55 and RA60

You may find that your original decal is missing or your original decal may faded and is no longer legible.

The decal was used to inform owners and mechanics of the valve clearances required by these engines along with other servicing details.

Our reproduction part is exacting in every detail. 

We ship globally to all countries weekly. No problems for overseas buyers.

$12.00

Moulded Carpet suitable for Toyota Corolla E70 Series

Front and rear moulded floor carpet for your fourth generation E70 series Toyota Corolla.

Suited to all RHD Toyota Corolla E70 series built between 1979 to 1987 including KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE70, TE71, TE72, TE73V, TE74V, CE70 and CE71V our moulded carpets are well fitting and made in Australia to the highest quality and replaces OEM carpets nicely.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fourth gen' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$320.00
NOTE! This item is Made To Order
* Carpet Colour:

* Carpet Pile:

Build Plate suitable for Toyota TE71 Corolla

Reproduction buil plate to suit your TE71 Corolla Trueno or Levin that was fitted with the famous 2T-G engine. 

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction plate is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

Shipping worldwide weekly - no problems for overseas buyers.

$85.00

Head Lamp and Grille Fastener Clip Pack suitable for various Toyota models (TH0330)

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

  • KE10, KE11, KE15, KE16, KE17 and KE18
  • KE20, KE25, TE21, TE25, TE27 and TE26
  • KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
  • TE72
  • AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

  • FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

  • KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

  • TA10
  • KA67
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

  • TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
  • TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

  • All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

3K-C 4K-C Engine decal suitable for various Toyota models

Reproduction engine decal Toyota models with 'Cali-spec' 3K-C and 4K-C engines.

Suits the following Toyota vehicles fitted with a 3K-C or 4K-C engine:

  • Toyota Corolla KE20 (North America only)
  • Toyota Corolla KE30, KE35, KE38 and KE50 (Japan and Australia).
  • Toyota Corolla KE70, KE72 and KE74 (Australia only)
  • Toyota Starlet KP61 1981 to 1984

These decals were fitted to the top of the rocker cover from the factory to denote the installation of the mighty 3K-C or 4K-C engine.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$9.50

Ball Joint suitable for Toyota Corolla E70 series

Ball joint to suit Corolla and Sprinter variants for Years 1981 to 1984.

Suited to KE70, AE70, TE70 and T18, and variants of these models.

High quality product made using high end engineering.

Get your project finished and back on the track or road.

Complete your drift machine, rat-rod, slammed, retro-car or even your daily driver.

$22.00

Bonnet (Hood) Support Rod Clamp suitable for various Toyota models (TH0460)

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

  • CV10, CV11, SV10, SV11, SV12
  • MCV20, MCV21, SXV20, SXV23, SXV25
  • MCV36, ACV36
  • ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

  • TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
  • AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
  • AT160, ST160, ST161, ST162, ST163, ST165
  • AT180, ST182, ST183, ST184, ST185
  • AT200, ST202, ST203, ST204, ST205
  • ZZT230 and ZZT231 

Toyota Corona

  • RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
  • RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
  • AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
  • T160, T170, T190 series
  • T200, T210, T220 series

Toyota Cressida

  • RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
  • X60, X70 and X80 series

Toyota Carina

  • A10, A40, A60 series
  • T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

  • KE30, KE35, KE38, KE55, TE55, TE37
  • KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
  •  AE80, EE80, AE81 AE85, AE82, AE86, CE80
  • AE90, AE92, AE93, AE94, AE95, AE96
  • AE101, AE111, AE112
  • ZRE120
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
  • ZRE172, ZRE173
  • NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

  • RN10, RN15
  • RN20, RN25
  • RN30, RN35, RN40, RN45
  • RN50, RN60, YN60, LN60, RN70, YN70, LN70
  • N80, N90, N100, N110 series
  • N120 series
  • N130 series
  • N140 series

Toyota Land Cruiser 

  • FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
  • FJ55, FJ55G, FJ55V, FJ56
  • FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
  • FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
  • HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

  • J90, J120 and J150 series

Toyota Starlet

  • KP60, KP61, KP62
  • P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$7.50
* Pack size: