Spare parts suitable for Toyota Celica T230 Series

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 9mm hole and are a plastic push in trim clips used to fasten interior panels such as door cards, trim panels, door pillars, boot linings and pillars.

 Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

• JZA80

Toyota MR2

• SW20, SW21
• ZZW30

Toyota GR Four Yaris 

• GXPA16

Toyota Corolla

• AE101, AE102, CE100, EE100, EE101
• AE110, AE111, AE112, AE114, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE110, ZZE111, ZZE112
• CDE120, NDE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
• ZZE130
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
• NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
• NRE181, ZRE182 and ZWE182

Toyota Celica

• ZZT230 and ZZT231

 Toyota Carina

• ST160, ST162 and ST163

Toyota Corona

• AT190, CT190, CT195, ST190, ST191, ST195
• AT210, AT211, CT210, CT211, CT215, CT216, ST210, ST215
• AT220, CT220 and ST220

Toyota Hilux

• GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

• FZJ71, FZJ76, FZJ78, FZJ79, GRJ71, GRJ76, GRJ78, GRJ79, HDJ79, HZJ71, HZJ76, HZJ78, HZJ79, KZJ77, LJ77, LJ79, RJ77, VDJ76, VDJ78, VDJ79
• FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
• FZJ100, FZJ105, HDJ100, HDJ101, HZJ105, UZJ100
• GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

• GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121, VZJ125
  GDJ150, GDJ151, GDJ155, GRJ150, GRJ151, GRJ152, KDJ150, KDJ155, LJ150, TRJ150, TRJ152 and TRJ155

Toyota Soarer

• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Complete your Toyota restoration project in style with a reproduction Toyota (TMC) Build Plate for vehicles built after 1980.

These TMC Build Plates were fitted in the engine bay of all early model Toyota's built from the 1980's right up until recent years - this may vary on some models.

We have seen these on Celica, Supra, MR2, Soarer, Corolla, Aristo, Starlet, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

Toyota door card clip pack to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado and GR4 Yaris

These clips have a fit to a 9mm hole size, have a 12mm top head, 17mm centre head and a 18mm lower head  are a plastic push in clip used to fasten interior panels and door trims and other trim panels.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

• MCV20, MCV21, SXV20, SXV23, SXV25
• MCV36, ACV36
• ACV40, ACV41, ACV45, AHV40, AHV41, ASV40, GSV40
• ACV51, ASV50, ASV51, AVV50 and GSV50

Toyota Celica (door panel triangle)

• ZZT230 and ZZT231 

 Toyota Corolla

• AE101, AE111, AE112
• ZRE120
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142 (back door panel)
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux

• GGN120, GGN125, GUN122, GUN123, GUN125, GUN126, KUN122, KUN125, KUN126, TGN120, TGN121, TGN126
• GUN135, GUN136, KUN135, KUN136 and TGN136

Toyota Land Cruiser 

• VDJ79
• GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

• GRJ120, GRJ125, KDJ120, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125
• GDJ150, GDJ151, GDJ155, GRJ150, GRJ151, GRJ152, KDJ150, KDJ155, LJ150, TRJ150, TRJ152 and TRJ155

Toyota GR4 Yaris

• GXPA16 and MXPA12

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Reduce weight transfer and improve handling and performance of your seventh generation Toyota Celica with Toyota Heritage roll centre adjusters.

Owners who have lowered their seventh generation Toyota Celica ZZT230 using adjustable coil overs may be experiencing increased roll and weight transfer when cornering. You can now adjust your roll centre back to the factory setting using Toyota Heritage roll centre adjusters and eliminate the increased roll caused through lowering your car.

Toyota Heritage GR Yaris roll centre adjusters are Australian made using high grade aluminium and are anodised to the highest standards and are suited to ZZT230 and ZZT231 model Toyota Celica.

The standard size roll centre adjuster we offer for the Toyota Celica ZZT230 or ZZT231 is 20mm. This is an ideal size suited to lowering your Toyota Celica ZZT230 or ZZT231 using coil overs and to the extent that does not require re-engineering of the tie-rod end ball joint at the steer knuckle.

For the series motorsport competitor Toyota Heritage can make custom sized roll centre adjusters to suit your Toyota Celica ZZT230 or ZZT231 - simply message us This email address is being protected from spambots. You need JavaScript enabled to view it.  . Our roll centre adjusters come complete with bolts, washers and nuts for simple fitment.

We ship worldwide weekly - no problems for overseas buyers.

Toyota push mounting clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser, Hilux, Surf, Starlet and  MR2.

These clips have a 18mm head diameter, 9mm stem length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

• ZZW30

Toyota Celica 

• ZZT230 and ZZT231

Toyota GR Four Yaris

• GXPA16

Toyota Corolla

• AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
• AE101, AE102, CE100, EE100, EE101
• ZZE110, WZE110, ZZE111 and ZZE112
• NZE120, NZE141, ZZE120, ZZE121, ZZE122, ZZE123, CDE120, NDE120, NZE120, ZRE120
• ZZE130
• ZRE142, ZRE143, ZZE141, ZZE142, AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182

Toyota Carina

• AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

• AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

• GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Hilux and Surf

• LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
• LN90, LN91, RN90, YN90, YN92
• LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
• LN110, LN112, RN110, YN110
• RN125
• KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
• KDN150, LN152, LN155, RZN152, RZN154
• KDN165, KZN165, RZN168, RZN169, VZN167
• KDN170, LN171, LN172, RZN174, VZN172
• KDN190, LN191, RZN193
• LN200, RZN200
• KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

• EP90, EP91, EP95 and NP90

Toyota Soarer 

• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota scrivet mounting clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser, Hilux, Surf, Starlet and  MR2.

These clips have a 14mm collar diameter, 8mm stem grip length and fit to a 7mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

• SW20 and SW21

Toyota Celica 

• ZZT230 and ZZT231

Toyota Corolla

• AE101, AE102, CE100, EE100, EE101
• ZZE110, WZE110, ZZE111 and ZZE112

Toyota Carina

• AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Corona

• AT210, AT211, CT211, CT216, ST210 and ST215

Toyota Soarer 

• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Cargo area carpet mat for your seventh generation T230 series Toyota Celica.

Suited to all Toyota Celica ZZT230 and ZZT231 built between 1999 to 2006 our cargo area carpet mats are styled off the OEM factory original mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'seventh gen' Toyota Celica project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

• Edge binding colours Edge binding colours
• 
•  

Toyota bonnet (hood) support rod clamp to suit various Toyota models - Aurion, Camry, Corolla, Hilux, Land Cruiser, Prado, Starlet, Carina, Surf, 4Runner and Corona

These clamps a fit to a 14mm hole size, have a clamp size that holds rod diameter of up to 8mm and are a plastic push in clip used to hold the support rod when the bonnet (hood) is closed.

Can be purchased in packs of 1, 5 or 10 pieces - use the drop down menu.

Suits the following models:

Toyota Aurion / Toyota Camry

• CV10, CV11, SV10, SV11, SV12
• MCV20, MCV21, SXV20, SXV23, SXV25
• MCV36, ACV36
• ACV40, ACV41, ACV45, AHV40, AHV41, ASV40 and GSV40

Toyota Celica

• TA40, TA41, TA42, TA45, TA46, TA47, RA40, RA42, RA43, RA45, RA46, RA55
• AA63, TA60, TA61, TA62, TA63, TA64, SA60, SA63, RA60, RA61, RA64, RA65
• AT160, ST160, ST161, ST162, ST163, ST165
• AT180, ST182, ST183, ST184, ST185
• AT200, ST202, ST203, ST204, ST205
• ZZT230 and ZZT231 

Toyota Corona

• RT100, RT104, RT105, RT106, RT108, RT109, RT110, RT111, RT112, RT118, RT119, RT122, TT121, TT125, TT126
• RT130, TT130, XT130, TT131, RT131, TT132, RT132, RT133, RT 134, RT135, RT137V, TT138V
• AT140, ST140, TT140, AT141, RT141, ST141, TT141, RT142, TT142, KT147V, TT147V
• T160, T170, T190 series
• T200, T210, T220 series

Toyota Cressida

• RX37V, RX30, RX32, RX35, TX30, MX30, MX32, MX35, MX36,MX40, MX41, MX45
• X60, X70 and X80 series

Toyota Carina

• A10, A40, A60 series
• T150, T160, T170, T180, T200 and T210 series

Toyota Corolla

• KE30, KE35, KE38, KE55, TE55, TE37
• KE70, KE73G, KE71V, KE72V, KE74V, AE70, TE73V, TE71, TE70, TE72, CE70, CE71V
•  AE80, EE80, AE81 AE85, AE82, AE86, CE80
• AE90, AE92, AE93, AE94, AE95, AE96
• AE101, AE111, AE112
• ZRE120
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE142
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153
• ZRE172, ZRE173
• NDE180, NRE180, ZRE181, ZRE182 and ZWE182

Toyota Hilux / SURF / 4Runner

• RN10, RN15
• RN20, RN25
• RN30, RN35, RN40, RN45
• RN50, RN60, YN60, LN60, RN70, YN70, LN70
• N80, N90, N100, N110 series
• N120 series
• N130 series
• N140 series

Toyota Land Cruiser 

• FJ40, FJ41, FJ42, FJ43, FJ44, FJ45, FJ46, FJ47, BJ40, BJ41, BJ42, BJ43, BJ44, BJ45, BJ46, BJ47, HJ40, HJ41, HJ42, HJ43, HJ44, HJ45, HJ46, HJ47
• FJ55, FJ55G, FJ55V, FJ56
• FJ60, FJ62, FJ62G, FJ62RG, BJ60, HJ60, HJ61
• FJ80, HDJ80, HDJ81, HZJ80, HZJ81, FZJ80
• HZJ105, FZJ105, FZJ100, UZJ100, HDJ1001, HDJ1002.

Toyota Prado

• J90, J120 and J150 series

Toyota Starlet

• KP60, KP61, KP62
• P70, P80 and P90 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota bonnet (hood) insulation clip pack to suit various Toyota models - Celica, Corolla, Hilux, Surf, Prado, Soarer and Supra

These clips have a 24.5mm head are used with a 7mm hole and are plastic push in trim clips used to fasten the under bonnet (hood) insulation sheet. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

• ZZT230 and ZZT231

Toyota Supra

• JZA80

Toyota Corolla

• AE101, CE101, CE102, CE105, CE107
• AE111, AE115, CDE110, CE113, CE116, WZE110, ZZE11, ZZE112
• CDE120, NDE120, ZRE120, ZZE120, ZZE121 and ZZE122

Toyota Hilux / Surf

• GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Prado

• GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121 and VZJ125

 Toyota Soarer

• JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Toyota screw mounting grommet clip pack to suit various Toyota models - Celica, Corolla, Carina, Caldina, Land Cruiser, Prado, Hilux, Surf and  Soarer

These clips have a 12.8m top head diameter on a 17.5mm head diameter, 12mm fitted length and fit to a 8.5mm hole are a plastic push in trim clip used to fasten door scuff plates, door opening trim moulding, carpet edges, exterior door moulds and flares, plastic panels on top of front guards under bonnet, mudguards, spoilers, boot trays

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica 

• AT200, ST202, ST203, ST204 and ST205
• ZZT230 and ZZT231

Toyota Corolla

• AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
• CDE120, NDE120, NZE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
• ZZE130
• AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
• ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153 and ZZE150

Toyota Carina

• AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

• AT211, CT216, ST210 and ST215

Toyota Land Cruiser

• GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

• KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

• GRN280, GRN285, TRN280 and TRN285

Toyota Soarer

• UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

Front and rear floor carpet set for your seventh generation T230 series Toyota Celica.

Suited to all RHD Toyota Celica ZZT230 and ZZT231 built between 1999 to 2006 our carpet floor mats are styled off the OEM factory original mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'seventh gen' Toyota Celica project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

• Bark Bark
• Black Black
• Blue Blue
• Brown Brown
• Buckskin Buckskin
• Burgundy Burgundy
• Charcoal Charcoal
• Chevy Chevy
• Ginger Ginger
• Green Green
• Kingfisher Kingfisher
• Red Red
• Slate Slate
• Spindrift Spindrift
•  

• Edge binding colours Edge binding colours
• 
•