Toyota MR2 W20 Series Parts

Spare parts for Toyota MR2 W20

Toyota Inner Guard (Fender) Fastener Clip Pack

Inner guard (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Camry, MR2, Carina, Caldina

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

 Toyota MR2

  • AW10 and AW11
  • SW20 and SW21
  • ZZW30

Toyota Corolla

  • AE81, AE82, AE85 and AE86
  • AE90, AE92, AE93, AE94, AE95 and AE96
  • AE101, AE102 and AE112 

 Toyota Camry

  • SV10, SV11, SV12, CV10 and CV11
  • SV20, SV21 and SV22

Toyota Caldina 

  • ST191, ST195 and ST198

 Toyota Carina

  • TA40, TA41, TA42, TA47, TA57, RA40, RA45, RA46, RA55 and RA56
  • AA60, KA67V, AA63, TA60, TA61, TA67V, TA62, TA63, RA63, CA60 and CA67V
  • ST162
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V
  • AT192, AT190, AT191, ST190, ST195, CT190 and CT195
  • AAT212, AT210, AT211, ST210, ST215, CT210, CT215, CT211 and CT216

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$25.00
* Pack size:

Toyota MR2 SW20 Carpet Mat Set

Front floor carpet mat set for your second generation W20 series Toyota MR2.

Suited to all RHD Toyota MR2 SW20 built between 1989 to 1999 our carpet floor mats are patterned off original OEM factory mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'second gen' Toyota MR2 project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$70.00
* Carpet Colour:

* Carpet Pile:

Toyota Screw Mounting Grommet Clip Pack

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 16mm collar diameter, 18mm stem length and fit to a 10mm x 10mm square hole and are a plastic push in trim clips used to fasten bumper bars, wheel arches, splashguards, sill panels, mud flaps, fuel tanks and fuel pipes.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

 Toyota Corolla

  • AE95
  • AE100, AE101, AE102, AE104, CE100, CE104, EE100 and EE101

Toyota Celica

  • AT160, ST160, ST161, ST162, ST163, ST165 and ST182

 Toyota Carina

  • ST160, ST162 and ST163

Toyota Corona

  • AT150, AT151, CT150, ST150, ST151
  • ST160 and ST162

Toyota Hilux

  • RN120, RN121, VZN120, VZN130, VZN131
  • KZN130, LN130, LN135, RN130, RN131, RN135, YN130, YN135
  • KDN185, KZN185, RZN180, RZN185, VZN180, VZN185
  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105 and UZJ100

Toyota Prado

  • KDJ90, KDJ95,KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

MR2 SW20 Rev 3 & 4 rear side lenses

Available in clear, smoke or amber complete your SW20 MR2 project in style with these rear side lenses.

These lenses suit Rev 3 and Rev 4 MR2 built between 1994 and 1997.

Availbale in the following colours:

Custom colours:

  • Clear
  • Smoke

Original colours:

  • Amber (JDM, Australia and 'rest of world')

These are made using the highest calibre manufacturing techniques and fit with precision.

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Clear and smoke colour lenses must be used with coloured bulbs. Product is a customisation part; seller does not warrant regulation compliance.

$160.00
* lense colour options:

Toyota Front and Rear Bumper Bar 9mm Clips Pack

Bumper cover fastener clip pack to suit various Toyota models - Celica, MR2, Supra and Soarer.

These clips are used to fasten front and rear bumpers into place. 

These are a push in clip that expands when the 9mm head is pushed in and holds firmly in place.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica (front bumper)

  • AT180, ST182, ST183, ST184 and ST185

Toyota MR2 (front bumper)

  • SW20 and SW21

 Toyota Supra (front and rear bumper)

  • JZA80

Toyota Soarer (front and rear bumper)

  • JZZ30, JZZ31, UZZ30, UZZ31 and UZZ32

 Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Interior Door Card Clip Pack

Toyota interior door card clip pack to suit various Toyota models - MR2, Corolla, Carina, Caldina, Land Cruiser, Prado, Hilux, Surf and Starlet.

These clips have a 13.3mm top head diameter on a 16.3mm head diameter, 13.3mm stem length and fit to a 8.5mm hole and are a plastic push in trim clip used to fasten 

door card and trim panel clips.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

Toyota Corolla

  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112

Toyota Carina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 ST210 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210 and ST215

Toyota Land Cruiser

  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • GKDN165, KDN166 and KDN190

Toyota Starlet

  • EP90, EP91, EP95 and NP90

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota MR2 SW20 Tail Light Lenses Zenki

Available in clear, smoke, amber or red complete your SW20 MR2 project in style with these rear indicator (turn signal) lenses.

These lenses suit Rev 1 and Rev 2 MR2 built between 1989 and 1993.

Availbale in the following colours:

Custom colours:

  • Clear
  • Smoke

Original colours:

  • Red (USDM)
  • Amber (JDM, Australia and 'rest of world')

These are made using the highest calibre manufacturing techniques and fit with precision.

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Clear and smoke colour lenses must be used with coloured bulbs. Product is a customisation part; seller does not warrant regulation compliance.

$190.00
* lense colour options:

MR2 SW20 Rev 3 & 4 complete set rear light lenses

Available in clear, smoke, red or amber complete your SW20 MR2 project in style with these rear indicator (turn signal) lenses.

Save dollars by buying this is a complete set containing four lenses. Cheaper than buying the rear side and tail light sets individually.

These lenses suit Rev 3 and Rev 4 MR2 built between 1994 and 1997.

Availbale in the following colours:

Custom colours:

  • Clear
  • Smoke

Original colours:

  • Amber (JDM, Australia and 'rest of world')
  • Red

These are made using the highest calibre manufacturing techniques and fit with precision.

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Clear and smoke colour lenses must be used with coloured bulbs. Product is a customisation part; seller does not warrant regulation compliance.

$360.00
* lense colour options:

Toyota Interior Trim Panel Fastener Clip Pack

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 9mm hole and are a plastic push in trim clips used to fasten interior panels such as door cards, trim panels, door pillars, boot linings and pillars.

 Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Supra

  • JZA80

Toyota MR2

  • SW20, SW21
  • ZZW30

 Toyota Corolla

  • AE101, AE102, CE100, EE100, EE101
  • AE110, AE111, AE112, AE114, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE110, ZZE111, ZZE112
  • CDE120, NDE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
  • ZZE130
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
  • NDE150, NRE150, ZRE151, ZRE152, ZRE153, ZZE150
  • NRE181, ZRE182 and ZWE182

Toyota Celica

  • ZZT230 and ZZT231

 Toyota Carina

  • ST160, ST162 and ST163

Toyota Corona

  • AT190, CT190, CT195, ST190, ST191, ST195
  • AT210, AT211, CT210, CT211, CT215, CT216, ST210, ST215
  • AT220, CT220 and ST220

Toyota Hilux

  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Land Cruiser 

  • FZJ71, FZJ76, FZJ78, FZJ79, GRJ71, GRJ76, GRJ78, GRJ79, HDJ79, HZJ71, HZJ76, HZJ78, HZJ79, KZJ77, LJ77, LJ79, RJ77, VDJ76, VDJ78, VDJ79
  • FZJ80, HDJ80, HDJ81, HZJ80, HZJ81
  • FZJ100, FZJ105, HDJ100, HDJ101, HZJ105, UZJ100
  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121, VZJ125
    GDJ150, GDJ151, GDJ155, GRJ150, GRJ151, GRJ152, KDJ150, KDJ155, LJ150, TRJ150, TRJ152 and TRJ155

Toyota Soarer

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Scrivet Clip 7mm

Toyota scrivet mounting clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser, Hilux, Surf, Starlet and  MR2.

These clips have a 14mm collar diameter, 8mm stem grip length and fit to a 7mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

Toyota Celica 

  • ZZT230 and ZZT231

Toyota Corolla

  • AE101, AE102, CE100, EE100, EE101
  • ZZE110, WZE110, ZZE111 and ZZE112

Toyota Carina

  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Corona

  • AT210, AT211, CT211, CT216, ST210 and ST215

Toyota Soarer 

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

MR2 SW20 Rev 3 & 4 tail light lenses

Available in clear, smoke, amber or red complete your SW20 MR2 project in style with these rear indicator (turn signal) lenses.

These lenses suit Rev 3 and Rev 4 MR2 built between 1994 and 1997.

Availbale in the following colours:

Custom colours:

  • Clear
  • Smoke

Original colours:

  • Red (USDM)
  • Amber (JDM, Australia and 'rest of world')

These are made using the highest calibre manufacturing techniques and fit with precision.

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Clear and smoke colour lenses must be used with coloured bulbs. Product is a customisation part; seller does not warrant regulation compliance.

$210.00
* lense colour options:

MR2 SW20 Rear Sway Bar Kit

Complete your SW20 MR2 project in style and improve handling and performance.

Ideal for street and track with a gain of up to 15% increased stiffness over factory sized bars.

Comes complete with bushes, brackets, links and lateral locks.

Toyota Heritage sway bars are Australian made, adjustable and powder coated to the highest standards.

The standard size bar we offer for the SW20 is 20mm powder coated red.

We offer the opportunity for buyers to custom their bar by selecting 'Custom' in the drop down menu 'Bar Selection'.

We ship wordlwide weekly - no problems for overseas buyers.

$285.00
2 In Stock
* Front Sway Bar Diameter:

Toyota Push Fit Plastic Rivet Clip 8mm

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina and  MR2.

These clips have a 16mm head diameter, 11mm fitted length and fit to a 8mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Available in Black or Grey - use the second drop down menu to select.

Suits the following models:

Toyota MR2

  • AW11
  • SW20 and SW21

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE86L
  • CDE120, NDE120, ZZE120 and ZZE121

Toyota Carina

  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • BJ60, BJ61, FJ60, FJ62, HJ60 and HJ61

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP71, EP76, NP70 and NP76

Toyota Corona 

  • AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

* Product Colour:

Toyota 10mm Interior Clip Pack

Toyota scrivet mounting clip pack to suit various Toyota models - Corolla, Carina, Corona, Caldina, Hilux, Soarer and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 11mm stem length and fit to a 10mm hole are a plastic push in trim clips used to fasten door trim cards, boot lining panels, console trims, rear door trims, tailgate trims, pillar trim, roof lining edge trims.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

 Toyota Corolla

  • AE91, AE92, AE95, CE90 and EE90

Toyota Caldina

  • AT191, CT190, ST190, ST191 and ST195

Toyota Carina

  • AT190, AT191, CT190 and ST191

Toyota Corona

  • ST191

Toyota Hilux

  • LN50, LN51, LN55, LN56, RN55, YN51, YN56
  • LN60, LN61, LN65, RN61, RN66, YN60, YN61G, YN61V, YN65
  • LN80, LN81, LN85, LN86, RN80, RN85, VZN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, VZN90, VZN95, YN90, YN92
  • LN100, LN105, LN106, LN107, RN101, RN105, RN106, VZN100, VZN105, YN100, YN106
  • LN110, LN111, RN110, VZN110, YN110
  • LN200, LN205 and RZN200

Toyota Soarer 

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

MR2 SW20 Rev 1 & 2 side markers

Available in clear, smoke or amber complete your SW20 MR2 project in style with these side marker (turn signal) lenses.

These lenses suit Rev 1 and Rev 2 MR2 built between 1989 and 1993.

Availbale in the following colours:

Custom colours:

  • Clear
  • Smoke

Original colours:

  • Amber (JDM, Australia and 'rest of world')

These are made using the highest calibre manufacturing techniques and fit with precision.

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Clear and smoke colour lenses must be used with coloured bulbs. Product is a customisation part; seller does not warrant regulation compliance.

$65.00
* lense colour options:

Toyota MR2 SW20 5mm lead kit for Rev 3 to Rev 5

Genuine 5mm Eagle Leads to suit your SW20 Toyota MR2 built from November 1993 onwards.

Suits 2.0L 3S-GE DOHC 16V Fuel Injection non-turbo models of the SW20 Toyota MR2 referred to as Rev 3, Rev 4 and Rev 5.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$114.35
2 In Stock

Toyota Push Fit Plastic Rivet Clip 6.5mm

Toyota screw mounting grommet clip pack to suit various Toyota models - Corolla, Celica, Carina, Corona, Caldina, Land Cruiser and  MR2.

These clips have a 15mm head diameter, 12mm fitted length and fit to a 6.5mm hole are a plastic push in trim clips used to fasten boot trims, consoles dashboards, glove boxes and engine bay plastics and air intake pipes and covers

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • AW11L
  • SW20 and SW21

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • AE86L, AE80, AE81, AE82, AE86, AE91, AE92, CE80, EE80
  • AE101, AE102, CE100, EE100, EE101
  • WZE110, ZZE111 and ZZE112

Toyota Carina

  • ST170G
  • AT190, AT191, AT192, CT190, CT195,ST190, ST191, ST195
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT191, CT190, CT196, CT197, CT198, CT199, ET196, ST190, ST191, ST195, ST198
  • AT211, CT216, ST210, ST215
  • AZT241, AZT246, ST246 and ZZT241

Toyota Land Cruiser

  • FJ62, FJ62G, FJ62V, BJ60, BJ61, FJ60, HJ60 and HJ61

Toyota Hilux and Surf

  • LN80, LN81, LN85, LN86, RN80, RN85, YN80, YN81, YN85, YN86, YN87
  • LN90, LN91, RN90, YN90, YN92
  • LN100, LN105, LN106, LN107, LN108, LN109, RN106, YN100, YN105, YN106, YN107
  • LN110, LN112, RN110, YN110
  • RN125
  • KDN145, LN145, LN147, RZN142, RZN147, RZN148, RZN149
  • KDN150, LN152, LN155, RZN152, RZN154
  • KDN165, KZN165, RZN168, RZN169, VZN167
  • KDN170, LN171, LN172, RZN174, VZN172
  • KDN190, LN191, RZN193
  • LN200, RZN200
  • KZN130, LN130, LN131, VZN130 and YN130

Toyota Starlet

  • EP71, EP76, NP70 and NP76

Toyota Corona 

  • ST171, CT176, ET176, ST171
  • AT190, CT190, CT195, ST190, ST191, ST195

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Door Card Interior Trim 8.5mm Clip Pack

Toyota door card interior trim clip pack to suit various Toyota models - Corolla, Carina, Corona, Cressida, Land Cruiser, Prado and  MR2.

These clips have a 13mm top head, 16mm centre head and 18mm collar diameter, 14mm stem length and fit to a 8.5mm hole are a plastic push in trim clips used to fasten door cards, trim panels, door pillars, boot linings and pillars etc.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota MR2

  • SW20 and SW21

 Toyota Corolla

  • AE101
  • AE91, AE92, AE95, CE90, CE96, CE97, EE90, EE96, EE97 and EE98

Toyota Carina

  • AT171, CT170, CT176, ET176, ST171
  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Corona

  • AT170, AT171, AT175, CT170, ST170, ST171
  • AT210, AT211, AT220, CT210, CT211, CT215, CT216, CT220, ST210, ST215 and ST220

Toyota Cressida

  • GX81, LX80, MX81, MX83, RX80 and RX81

Toyota Land Cruiser 

  • BJ73, FJ70, FJ73, HZJ70, HZJ73, HZJ77, LJ70, LJ71, LJ72, LJ73, LJ77, LJ78, LJ79, PZJ70, PZJ73, PZJ77, RJ70, RJ73, RJ77
  • FJ80, FZJ80, HDJ80, HDJ81, HZJ80 and HZJ81

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ90, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota MR2 SW20 door courtesy light lenses

Reproduction courtesy lamp lenses to suit all SW20 and SW21 Toyota MR2.

Available in clear or original red to complete your Toyota MR2 SW20 or SW21 project in style with these door courtesy light lenses.

Also known as a 'puddle lamp' in some markets, these lenses are fitted to the lamp in the door of your Toyota MR2 and provide light to see where you are stepping out and for approaching traffic to see that you have the door of your Toyota MR2 open.

Available in the following colours:

Custom colours:

  • Clear

Original colours:

  • Red

These are made using the highest calibre manufacturing techniques and fit with precision.

Suited to all SW20 and SW21 Toyota MR2 whether it be your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Shipping worldwide weekly - no problems for overseas buyers.

$60.00
* lense colour options:

Toyota MR2 SW20 5mm lead kit for Rev 2

Genuine 5mm Eagle Leads to suit your SW20 Toyota MR2 built from November 1991 to October 1993

Suits 2.0L 3S-GE DOHC 16V Fuel Injection non-turbo models of the SW20 Toyota MR2 referred to as Rev 2.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$142.85
2 In Stock