Toyota Corolla E30 and E50 Series Parts

Spare parts for Toyota Corolla's including KE30, KE35, KE36, KE38, KE50, KE51, KE55, TE30, TE31, TE36V, TE37 and TE52

Toyota ASCO Brake Booster decal

This decal was applied to Toyota vehicles through out the 1970's and early 1980's, and denoted the licenced use of ASCO disc brake technology by Toyota.

Complete your Toyota Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

Toyota Head Lamp and Grille Fastener Clip Pack TH0330

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

  • KE10, KE11, KE15, KE16, KE17 and KE18
  • KE20, KE25, TE21, TE25, TE27 and TE26
  • KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
  • TE72
  • AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

  • FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

  • KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

  • TA10
  • KA67
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

  • TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
  • TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

  • All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota E30 E50 series Bespoke Dash Fascia

Reproduction bespoke dash fascia to suit third generation Toyota Corolla E30 and E50 series models built between 1974 to 1981.

Suited to all E30 series and E50 series generation Corolla and Sprinter variants such KE30, KE35, KE38 an KE55 our dash fascias are made in Australia to the highest quality, 3D printed and can be configured (produced) to suit a wide range of instrumentation from OEM through to performance and electric-vehicle ('EV') conversion applications.

Instrumentation configurations are available for:

  • Blank (no inset for instrumentation)
  • Haltech IC7
  • Racepack IQ3
  • Motec C125/C185 and C127/C128
  • AIM LINK MXP, MXS or MXG
  • AEM ED7/CD7 or ED5/CD5
  • Powertune 7"
  • ECU Master ADU5 or ADU7
  • Holley EFI 7"
  • Fueltech FT450/FT550 and FT500/FT600

If your chosen instrumentation configuration is not listed above please email This email address is being protected from spambots. You need JavaScript enabled to view it.

OEM radio and air vents may be deleted and three different power plug configurations are also available - delete, USB or Narva 12V socket.

 Please use the drop down menus to select your dash fascia configuration.

 Available in either right hand drive or left hand drive - please use the additional drop down menu to select your driver side position.

Complete your 'third gen' Toyota Corolla project in style - whether its a retro-ride, drift car, track car, rally car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$550.00
* Driver Side:

* Instrument Configuration:

* Power Socket:

* Air Vent:

* Factory Radio:

Toyota 4K-C Engine Emission Control decal

Reproduction emission control decal for Toyota models with 4K-C engines.

Suits 4K-C ('California Spec') engined models as follows:

  • Toyota Corolla KE50, KE55 and KE50R (Nov 1978 onwards) this included the lift back variants as well as the sedan and hard top models fitted with a 4K engine.

These decals were fitted to the underside of the bonnet (hood) from the factory and provided compliance data for ensuring emissions control.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$12.00

Toyota 2TG 8mm lead kit (TH84169)

Genuine Eagle brand 8mm ignition leads to suit your Toyota Celica, Toyota Corona or Toyota Carina fitted with an 18RG engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 2TG engines.

Suits 2.0L 2TG DOHC GT1600 (Celica and Carina) and Levin or Trueno (Corolla) models as follows:

  • Celica - TA23, TA27, TA28, TA40, TA45, TA60 and TA61
  • Carina - TA12, TA17, TA40, TA45 and TA60 
  • Corolla - TE21, TE27, TE28, TE37, TE51 and TE71 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$85.00

Toyota Bonnet (Hood) Weather Strip Clips Pack (TH0391)

Radiator support to bonnet (hood) rubber seal fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Cressida, Land Cruiser, MR2, Hilux, Starlet and Supra

These clips are used to fasten the rubber strip that sits between the bonnet (hood) underside and top of the radiator support panel to reduce wind and water coming into the under bonnet (hood) area. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • All models from KE30 through to ZWE182

 Toyota Corona

  • All models from ST140 through to ST215

Toyota Cressida

  • All models from MX32 through to RX81

Toyota Hilux and Surf

  • All models from LN130 through to VZN185

Toyota Land Cruiser

  • All models from BJ60 through HZJ105

Toyota MR2

  • AW10 andAW11
  • ZZW30

 Toyota Supra

  • GA70, JZA70 and MA70
  • JZA80

Toyota Starlet

  • KP60, KP61

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota 3K-B Engine decal

Reproduction valve clearance decal for Toyota models with 3K-B engines.

Suits the following Toyota vehicles fitted with a 3K-B engine:

  • Toyota Corolla KE11, KE17 and KE18 (SL variants only)
  • Toyota Corolla KE20, KE25 and KE26V (Japan and Australia only)
  • Toyota Corolla KE30 and KE35 (Japan and Australia).
  • Toyota Starlet KP47 and KP50 (also known as Publica in some markets)

These decals were fitted to the top of the rocker cover from the factory to denote the installation of the mighty 3K-B engine.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$9.50

Toyota 4K Valve Clearance decal

Reproduction valve clearance decal for Toyota models with 4K engines.

Suits 4K engined models as follows:

  • Toyota Corolla KE50, KE55 and KE50R (1978 to 1981) this included the lift back variants as well as the sedan and hard top models fitted with a 4K engine.
  • Toyota Corolla KE70 (1981 to 1983)
  • Toyota Corolla KE73G, KE71V and KE72V (Japan only)
  • Toyota Starlet KP61 (also known as Publica in some markets)

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$12.00

Toyota 2T Engine decals 2T 2T-B 2T-C 2T-G

Reproduction engine decal for Toyota models with 2T, 2T-B, 2T-C or 2T-G engines.

Suits 2T engined models as follows:

  • Toyota Celica TA21, TA22
  • Toyota Corolla TE21, TE27 and TE28
  • Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30
  • Toyota Corona TT100, TT106V, TT110 and TT120

Suits 2T-B engined models as follows:

  • Toyota Celica TA28
  • Toyota Corolla TE21, TE27 and TE28
  • Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30

 Suits 2T-C engined models as follows:

  • Toyota Celica TA21, TA22
  • Toyota Corolla TE21, TE27 and TE28
  • Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30

Suits 2T-G engined models as follows:

  • Toyota Celica TA27 (1600GT versions)
  • Toyota Corolla TE21, TE27 and TE28
  • Toyota Carina TA12 and TA17 (1600GT versions)

These decals were fitted from the factory to the cam-shaft cover or the timing chain inspection plate for twin cam versions.

Select the decal for your engine by using the drop down menu.

Our reproduction decals are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$10.00
* engine model:

Toyota K Engine Dual Valve Springs with Titanium Retainers 3K 4K

Toyota K engine dual valve springs with Titanium retainers.

Suitable for all K, 3K, 4K and 5K applications. Road, rally, race or drift.

Designed for use in engines with modified camshafts which typically require the engine to spin faster in order to make more power. These springs will better control the valve motion and therefore allow a higher engine RPM before valve bounce occurs (ie the loss of valve control point). These springs also allow camshafts to have more aggressive acceleration ramps, ie open the valve faster. 

The retainers accept factory locks (collets), which Toyota Heritage can supply if needed.

The original factory standard installed height will provide 38.6kg (85lb) on the valve seat. The table below gives all the data.

mm inch   kg lbs
40 1.575   27.27 60
35 1.378   50.00 110
30 1.181   72.73 160
25 0.984   99.09 218
22 0.866   124.55 274
21 0.827   bound bound

Can ship worldwide - no problems for overseas buyers.

$285.00

Toyota 3K-C 4K-C Engine decal

Reproduction engine decal Toyota models with 'Cali-spec' 3K-C and 4K-C engines.

Suits the following Toyota vehicles fitted with a 3K-C or 4K-C engine:

  • Toyota Corolla KE20 (North America only)
  • Toyota Corolla KE30, KE35, KE38 and KE50 (Japan and Australia).
  • Toyota Corolla KE70, KE72 and KE74 (Australia only)
  • Toyota Starlet KP61 1981 to 1984

These decals were fitted to the top of the rocker cover from the factory to denote the installation of the mighty 3K-C or 4K-C engine.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$9.50

Toyota 3K-B Valve Clearance decal

Reproduction valve clearance decal for Toyota models with 3K-B engines.

Suits 3K-B engined models as follows:

  • Toyota Corolla KE11, KE17 and KE18 (SL variants only)
  • Toyota Corolla KE20, KE25 and KE26V (Japan and Australia only)
  • Toyota Corolla KE30 and KE35 (Japan and Australia).
  • Toyota Starlet KP47 and KP50 (also known as Publica in some markets)

These decals were fitted to the side of the rocker cover from the factory and provided data for valve clearances.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$12.00

Toyota 2T-B Engine Build Plate

Available for Toyota models with 2T-B engines and with one of two transmissions 

Suits 2T-B engined models as follows:

  • Toyota Celica TA23, TA28, TA29 and TA60
  • Toyota Corolla TE31 and TE37
  • Toyota Carina TA12, TA14, TA17, TA18, TA19V, TA30, TA40, TA60 and TA61

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

Shipping worldwide weekly - no problems for overseas buyers.

$75.00

Toyota 3K 4K Manifold Flange Kits

Off the shelf and ready to go manifold flange kit that has been designed and engineered.

Make your own inlet and exhaust mainfolds with Toyota Heritage's stainless steel manifold flanges to suit your 3K or 4K high performance Toyota engine.

Our manifold flanges are made from 16mm stainless steel which is perfect for post-welding milling to ensure a flat and perfect fit to the engine head.

With both flanges made in the same material and thickness this ensures ease of even fastening of the manifolds to the engine head.

Select from Full Kit (incl both inlet and exhaust) or Exhaust Flange or Inlet Flange using the drop-down menu.

Perfect for the owner who is making their own ITB arrangement and needs an exhaust header to match.

Suitable for race, drift, road or any application. 

Made to order part.

Worldwide shipping weekly - so no problems for overseas buyers.

$150.00
Manifold selection:

Toyota 3K and 4K Fluids decal set

Reproduction decal set for fluids (oil and water) to suit Toyota models with 3K and 4K engines of all variants.

Suits the following Toyota vehicles fitted with a 3K or 4K engine:

  • Toyota Corolla KE30, KE35, KE38 and KE50 (Japan and Australia).
  • Toyota Corolla KE70, KE72 and KE74 (Australia only)
  • Toyota Starlet KP61 1981 to 1984

These decals were fitted to the top of the radiator cap, coolant overflow resevoir and the side of the rocker cover from the factory.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$20.00

Corolla Idler Arm E30

Idler arm to suit Corolla and Sprinter variants for Years 1974 to 1981.

Suited to KE30, KE35, KE36, KE38, KE55, TE31 and TE37 and variants of these models.

High quality product made using high end engineering.

Get your project finished and back on the track or road.

Complete your drift machine, rat-rod, slammed, retro-car or even your daily driver.

$68.00

Toyota 2T-G 2TG-R Valve Clearance decal

Reproduction valve clearance decal for Toyota models with 2T-G and 2T-GR engines.

Suits 2T-G and 2T-GR  engined models as follows:

  • Toyota Celica TA22, TA40, TA45, TA60 and TA61
  • Toyota Corolla TE21, TE27, TE31, TE37, TE51 and TE71
  • Toyota Carina TA12 and TA17

These decals were fitted to the air plenum from the factory and provided instructions for valve clearances and other data such as air filter element change out.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$10.00

Toyota Corolla E30 and E50 Series Moulded Carpet

Front and rear moulded floor carpet for your third generation E30 or E50 series Toyota Corolla.

Suited to all RHD Toyota Corolla E30 and E50 series built between 1974 to 1981 including KE30, KE35, KE36, KE38, KE50, KE55, TE30, TE31, TE35, TE37 and TE50 our moulded carpets are well fitting and made in Australia to the highest quality and replaces OEM carpets nicely.

NOTE: these carpets do not fit the liftback Corolla variants such as TE50, TE51, TE52 and KE50R.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'third gen' Toyota Corolla project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

 

$240.00
* Carpet Colour:

* Carpet Pile:

Toyota K Engine Valve Clearance decal 4K-C 3K-H 3K-C 2K

Reproduction valve clearance decal for Toyota models with 2K, 3K-H, 3K-C or 4K-C engines.

Suits 4K-C ('California Spec') engined models as follows:

  • Toyota Corolla KE50, KE55 and KE50R (Nov 1978 onwards)

Suits 3K-C ('California Spec') engined models as follows:

  • Toyota Corolla KE30, KE35 and KE36
  • Toyota Corolla KE50 (Japan only)
  • Toyota Corolla KE20 (North America only)

Suits 3K-H ('High Octane Spec') engined models as follows:

  • Toyota Corolla KE30 and KE36 (Japan only)
  • Toyota Publica KP37 (Japan only)

Suits 2K engined models as follows:

  • Toyota Publica KP30 and KE36 (also known as Toyota 1000)

These decals were fitted to rocker cover from the factory and provided instructions for valve clearances and other data such as air filter element change out.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$10.00

Corolla E30 series Pitman Arm KE30 KE35 KE36

Pitman arm to suit Corolla and Sprinter variants for Years 1974 to 1981.

Suited to KE30, KE35, KE36, KE38, KE55, TE31 and TE37 and variants of these models.

High quality product made using high end engineering.

Get your project finished and back on the track or road.

Complete your drift machine, rat-rod, slammed, retro-car or even your daily driver.

$35.00