Toyota Corolla E20 Series Parts

Spare parts for Toyota Corolla's including KE20, KE25, KE26, TE21 and TE27

Toyota ASCO Brake Booster decal

This decal was applied to Toyota vehicles through out the 1970's and early 1980's, and denoted the licenced use of ASCO disc brake technology by Toyota.

Complete your Toyota Restoration in style with this decal that is applied to the brake booster (also known as Servo Unit).

Fitted at the very top of the unit, this decal is most visible immediately when the bonnet (hood) is opened. 

Often the original decal may have been removed ahen the servo unit was reconditioned or when a respray of the engine bay has taken place.

Available only from Toyota Heritage this decal will take your restoration one small step closer towards concourse.

We ship worldwide every week - no problems for international buyers.

$7.50

Toyota Head Lamp and Grille Fastener Clip Pack TH0330

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

  • KE10, KE11, KE15, KE16, KE17 and KE18
  • KE20, KE25, TE21, TE25, TE27 and TE26
  • KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
  • TE72
  • AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

  • FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

  • KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

  • TA10
  • KA67
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

  • TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
  • TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

  • All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota 3K 4K Manifold Flange Kits

Off the shelf and ready to go manifold flange kit that has been designed and engineered.

Make your own inlet and exhaust mainfolds with Toyota Heritage's stainless steel manifold flanges to suit your 3K or 4K high performance Toyota engine.

Our manifold flanges are made from 16mm stainless steel which is perfect for post-welding milling to ensure a flat and perfect fit to the engine head.

With both flanges made in the same material and thickness this ensures ease of even fastening of the manifolds to the engine head.

Select from Full Kit (incl both inlet and exhaust) or Exhaust Flange or Inlet Flange using the drop-down menu.

Perfect for the owner who is making their own ITB arrangement and needs an exhaust header to match.

Suitable for race, drift, road or any application. 

Made to order part.

Worldwide shipping weekly - so no problems for overseas buyers.

$150.00
Manifold selection:

Toyota Genuine Parts Warning decal

Complete your early Toyota restoration project in style with a Genuine Parts Warning decal.

These 'Genuine Parts Warning' decals were located on the aircleaner assembly or rocker cover of all early model Toyota's built during the 1960's and early 1970's at Australian Motor Industries (AMI). These decals were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Often many cars have lost this decal over their life as past owners may removed them for painting or the decal was simply torn or lost.

The decal advises buyers that genuine parts are made with the same quality as the originals and should always be used.

Completed on an original high chrome type material and using precision fonts this decal is an exact replica of those fitted back in the day.

 

 

$9.50
15 In Stock

Toyota 2TG 8mm lead kit (TH84169)

Genuine Eagle brand 8mm ignition leads to suit your Toyota Celica, Toyota Corona or Toyota Carina fitted with an 18RG engine.

Our photo shows each of the boot and tube assemblies specific to this kit that suits the 2TG engines.

Suits 2.0L 2TG DOHC GT1600 (Celica and Carina) and Levin or Trueno (Corolla) models as follows:

  • Celica - TA23, TA27, TA28, TA40, TA45, TA60 and TA61
  • Carina - TA12, TA17, TA40, TA45 and TA60 
  • Corolla - TE21, TE27, TE28, TE37, TE51 and TE71 

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$85.00

Toyota Dealership Stock Plate - York Motors

Complete your early Toyota restoration project with an authentic type York Motors Toyota dealership stock plate plate.

These Stock Plates were fitted in the engine bay of all early model Toyota's built during the 1960's and early 1970's. Used extensively on locally built AMI cars but also on fully imported models and this included Crown, Corolla, Sprinter, Corona, Mark ii, Tiara and Publica.

Often many cars that were sold through York Motors have lost this plate or when an owner has removed it for painting the original plate has been deformed.

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

Compliments our TEQ Build plate very nicely adding those finishing touches to the engine bay for an authentic restoration.

The pricing includes having your car's unique stock number applied to the plate before we ship it to you.

$65.00
7 In Stock

TEQ Build Plate early models to 1974

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the mid and late 1960's and early 1970's. Generally these were used up till December 1974, but this may vary in some countries.

We have seen these on Crown, Corolla, Corona, Mark ii, Stout, Publica, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. We currently have one of these fitted to our Toyota Heritage KE17 race car and receive numerous compliments about how well this completes our car and the finish and standard of the plate itself.

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$75.00

Corolla Idler Arm E20

Idler arm to suit Corolla and Sprinter variants for Years 1970 to 1974.

Suited to KE20, TE21, KE26, KE28, KE25, KE27 and TE27 and variants of these models.

High quality product made using high end engineering.

Get your project finished and back on the track or road.

Complete your drift machine, rat-rod, slammed, retro-car or even your daily driver.

$130.00
Out of stock

Toyota Seat Forward Release Lever 1966 to 1976

Pair of reproduction seat levers for forward release operation of front seats to suit Toyota Models built between 1966 and 1976.

Suited to all first (E10 series) and second (E20 series) generation Corolla and Sprinter as well as first generation Celica (A20 series) our seat levers are made in Australia to the highest quality, 3D printed and are stronger than OEM factory originals.

A small but very functional part, these levers allow for the front seats in two door variants to fold forward and allow passengers access to and from the back seats.

Why perservere with a broken levers that lascerate and gouge when you can now simply replace them with these reproductions by Toyota Heritage.

Complete your project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$60.00

Window regulator seal

Complete your early Toyota restoration project!

These seals were fitted between the inside of the door frame and the window regulator/winder mechanism of Toyota's built during the 1960's and early 1970's. We have seen these on Crown, Corolla, Corona, Mark ii and Landcruiser just to name a few models.

These stop vibration and 'wobble' of your window winder handle and help eliminate rattles.

Our reproduction part is exacting in every detail.

$10.00

TEQ Build Plate Early Models to 1974 Japan Delivery

Complete your early Toyota restoration project in style with a reproduction Toyota (TEQ) Build Plate for vehicles with original delivery in Japan.

These TEQ Build Plates were fitted in the engine bay of all early model Toyota's built during the mid and late 1960's and early 1970's. Generally these were used up till December 1974, but this may vary on some models.

We have seen these on Crown, Corolla, Corona, Mark ii, Stout, Publica, Hilux and Landcruiser just to name a few models.

You may find that your original plate is missing (these are not a VIN!) as an owner may have removed it for painting of sometimes they have corroded and are no longer legible.

The plate was used to inform the production line workers as to what model engine was to be fitted to the vehicle - part of Toyota's quality program!

Our reproduction part is exacting in every detail. 

The pricing includes having your car's data applied to the plate before we ship it to you.

We ship globally to all countries weekly.

$75.00

Tie rod end E20

Idler arm to suit Corolla and Sprinter variants for Years 1970 to 1974.

Suited to KE20, TE21, KE26, KE28, KE25, KE27 and TE27 and variants of these models.

High quality product made using high end engineering.

Get your project finished and back on the track or road.

Complete your drift machine, rat-rod, slammed, retro-car or even your daily driver.

$25.00

Toyota 2T Engine decals 2T 2T-B 2T-C 2T-G

Reproduction engine decal for Toyota models with 2T, 2T-B, 2T-C or 2T-G engines.

Suits 2T engined models as follows:

  • Toyota Celica TA21, TA22
  • Toyota Corolla TE21, TE27 and TE28
  • Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30
  • Toyota Corona TT100, TT106V, TT110 and TT120

Suits 2T-B engined models as follows:

  • Toyota Celica TA28
  • Toyota Corolla TE21, TE27 and TE28
  • Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30

 Suits 2T-C engined models as follows:

  • Toyota Celica TA21, TA22
  • Toyota Corolla TE21, TE27 and TE28
  • Toyota Carina TA12, TA14, TA17, TA18, TA19V and TA30

Suits 2T-G engined models as follows:

  • Toyota Celica TA27 (1600GT versions)
  • Toyota Corolla TE21, TE27 and TE28
  • Toyota Carina TA12 and TA17 (1600GT versions)

These decals were fitted from the factory to the cam-shaft cover or the timing chain inspection plate for twin cam versions.

Select the decal for your engine by using the drop down menu.

Our reproduction decals are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$10.00
* engine model:

Toyota K Engine Dual Valve Springs with Titanium Retainers 3K 4K

Toyota K engine dual valve springs with Titanium retainers.

Suitable for all K, 3K, 4K and 5K applications. Road, rally, race or drift.

Designed for use in engines with modified camshafts which typically require the engine to spin faster in order to make more power. These springs will better control the valve motion and therefore allow a higher engine RPM before valve bounce occurs (ie the loss of valve control point). These springs also allow camshafts to have more aggressive acceleration ramps, ie open the valve faster. 

The retainers accept factory locks (collets), which Toyota Heritage can supply if needed.

The original factory standard installed height will provide 38.6kg (85lb) on the valve seat. The table below gives all the data.

mm inch   kg lbs
40 1.575   27.27 60
35 1.378   50.00 110
30 1.181   72.73 160
25 0.984   99.09 218
22 0.866   124.55 274
21 0.827   bound bound

Can ship worldwide - no problems for overseas buyers.

$285.00

AMI Paint Code Decal 1969-1971 M to W Lustrelife

All colours available from 1969 to 1971.

Complete your early Toyota restoration project in complete style!

These AMI Lustrelife paint colour decals were fitted in the engine bay of all early model Toyota's built during 1969 to 1971. These were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Our decals are correct in every detail including artwork, colour names and paint codes.

Colours used by AMI and included in our range of decals to chose from are:

  • Apple
  • Bronze Metallic
  • Caribbean
  • Cirrus Grey
  • Columbine Blue
  • Cornflower
  • Cream
  • Deep Russet
  • Desert Beige
  • Havana Gold
  • Hayman Blue
  • Marina Turquoise
  • Midnight Blue
  • Mocca
  • Peak White
  • Signal Red
  • Sirius White
  • Targa Pearl Metallic
  • White 
  • Willow

Often many cars have lost this decal when an owner has removed it for painting the original decal has been torn or lost.

If you cannot find your colour in the decals with have listed please contact us at Toyota Heritage.

We can also assist in identifying the colour of your car if you are unsure which decal to purchase.

These decals were also fitted to Rambler (Matador, Rebel, Hornet, American etc), Triumph (Herald, 2000, 2000PI, 2500TC etc) and AMC (Javelin, AMX etc). 

 

$6.50
93 In Stock
* paint color name:

Toyota 3K-B Engine decal

Reproduction valve clearance decal for Toyota models with 3K-B engines.

Suits the following Toyota vehicles fitted with a 3K-B engine:

  • Toyota Corolla KE11, KE17 and KE18 (SL variants only)
  • Toyota Corolla KE20, KE25 and KE26V (Japan and Australia only)
  • Toyota Corolla KE30 and KE35 (Japan and Australia).
  • Toyota Starlet KP47 and KP50 (also known as Publica in some markets)

These decals were fitted to the top of the rocker cover from the factory to denote the installation of the mighty 3K-B engine.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$9.50

Toyota 2T-G 2TG-R Valve Clearance decal

Reproduction valve clearance decal for Toyota models with 2T-G and 2T-GR engines.

Suits 2T-G and 2T-GR  engined models as follows:

  • Toyota Celica TA22, TA40, TA45, TA60 and TA61
  • Toyota Corolla TE21, TE27, TE31, TE37, TE51 and TE71
  • Toyota Carina TA12 and TA17

These decals were fitted to the air plenum from the factory and provided instructions for valve clearances and other data such as air filter element change out.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$10.00

Toyota Factory Auxiliary Driving Light Lenses

Complete your early Toyota restoration project in style with a pair of reproduction lenses to suit your early style factory Toyota Motor Corp auxiliary ('driving') lights.

Replaces original Koito part number L2589.

Mostly fitted to Toyota Stout and Toyota Land Cruiser these were also fitted as factory auxiliary driving lights on Crown, Corolla, Corona, Mark ii, and Hilux just to name a few other models.

You may find that your original lense is missing or cracked. These wonderful reproduction lenses are exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers

$65.00

AMI Paint Code Decal 1969-1971 A to H Lustrelife

All colours from 1969 to 1971 available.

Complete your early Toyota restoration project in complete style!

These AMI Lustrelife paint colour decals were fitted in the engine bay of all early model Toyota's built during 1969 to 1971. These were applied to the Port Melbourne (Australia) assembled Crown, Corolla and Corona.

Our decals are correct in every detail including artwork, colour names and paint codes.

Colours used by AMI and included in our range of decals to chose from are:

  • Apple
  • Bronze Metallic
  • Caribbean
  • Cirrus Grey
  • Columbine Blue
  • Cornflower
  • Cream
  • Deep Russet
  • Desert Beige
  • Havana Gold
  • Hayman Blue
  • Marina Turquoise
  • Midnight Blue
  • Mocca
  • Peak White
  • Signal Red
  • Sirius White
  • Targa Pearl Metallic
  • White 
  • Willow

Often many cars have lost this decal when an owner has removed it for painting the original decal has been torn or lost.

If you cannot find your colour in the decals with have listed please contact us at Toyota Heritage.

We can also assist in identifying the colour of your car if you are unsure which decal to purchase.

These decals were also fitted to Rambler (Matador, Rebel, Hornet, American etc), Triumph (Herald, 2000, 2000PI, 2500TC etc) and AMC (Javelin, AMX etc). 

 

$6.50
* paint color name:

Toyota 3K-C 4K-C Engine decal

Reproduction engine decal Toyota models with 'Cali-spec' 3K-C and 4K-C engines.

Suits the following Toyota vehicles fitted with a 3K-C or 4K-C engine:

  • Toyota Corolla KE20 (North America only)
  • Toyota Corolla KE30, KE35, KE38 and KE50 (Japan and Australia).
  • Toyota Corolla KE70, KE72 and KE74 (Australia only)
  • Toyota Starlet KP61 1981 to 1984

These decals were fitted to the top of the rocker cover from the factory to denote the installation of the mighty 3K-C or 4K-C engine.

Our reproduction part is exacting in every detail. 

Shipping worldwide weekly - no problems for overseas buyers.

$9.50