Toyota Celica T160, T180, T200 & T230 Series Parts

Spare parts for Toyota Celica including ST160, ST161, ST162, ST163, ST165, AT160 ST180, AT180, ST182, ST183, ST184, ST185 AT200, ST202, ST203, ST204, ST205, ZZT230 and ZZT231.

Toyota Inner Guard (Fender) Fastener Clip Pack

Inner guard (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Camry, MR2, Carina, Caldina

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

 Toyota MR2

  • AW10 and AW11
  • SW20 and SW21
  • ZZW30

Toyota Corolla

  • AE81, AE82, AE85 and AE86
  • AE90, AE92, AE93, AE94, AE95 and AE96
  • AE101, AE102 and AE112 

 Toyota Camry

  • SV10, SV11, SV12, CV10 and CV11
  • SV20, SV21 and SV22

Toyota Caldina 

  • ST191, ST195 and ST198

 Toyota Carina

  • TA40, TA41, TA42, TA47, TA57, RA40, RA45, RA46, RA55 and RA56
  • AA60, KA67V, AA63, TA60, TA61, TA67V, TA62, TA63, RA63, CA60 and CA67V
  • ST162
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V
  • AT192, AT190, AT191, ST190, ST195, CT190 and CT195
  • AAT212, AT210, AT211, ST210, ST215, CT210, CT215, CT211 and CT216

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$25.00
* Pack size:

Toyota Interior Trim Clip Pack

Interior trim clip pack to suit various Toyota models - Celica, Camry, Corolla, Corona, Cressida, Soarer, Starlet and Supra

These clips are

Used with a 6.6mm hole and are plastic push in trim clips used to fasten interior trim sections to the inner body work and on some models they are used to fasten bumper sections to the main bumper cover. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • ST180, ST184 and ST185

Toyota Supra

  • JZA80

Toyota Corolla

  • AE100, AE101, AE102, AE104, CE100, CE104, CE106, CE108, CE109, EE100, EE101, EE102, EE103, EE104, EE105, EE106, EE107 and EE108

 Toyota Corona

  • AT177, CT176, CT177 and ET176

Toyota Camry

  • CV10, CV11, SV10, SV11 and SV12

Toyota Starlet

  • EP70, EP71, EP76 and NP70

Toyota Soarer

  • UZZ40 

Toyota Cressida

  • GX70, LX76, YX76 and YX78

Toyota Carina

  • AT150, AT151, CT150, ST150
  • AT160, ST162
  • CT176, ET176
  • ST180, ST181, ST182 and ST183

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

GR Yaris Front Sway Bar Kit

ZZT230 Celica Roll Centre Adjusters

Reduce weight transfer and improve handling and performance of your seventh generation Toyota Celica with Toyota Heritage roll centre adjusters.

Owners who have lowered their seventh generation Toyota Celica ZZT230 using adjustable coil overs may be experiencing increased roll and weight transfer when cornering. You can now adjust your roll centre back to the factory setting using Toyota Heritage roll centre adjusters and eliminate the increased roll caused through lowering your car.

Toyota Heritage GR Yaris roll centre adjusters are Australian made using high grade aluminium and are anodised to the highest standards and are suited to ZZT230 and ZZT231 model Toyota Celica.

The standard size roll centre adjuster we offer for the Toyota Celica ZZT230 or ZZT231 is 20mm. This is an ideal size suited to lowering your Toyota Celica ZZT230 or ZZT231 using coil overs and to the extent that does not require re-engineering of the tie-rod end ball joint at the steer knuckle.

For the series motorsport competitor Toyota Heritage can make custom sized roll centre adjusters to suit your Toyota Celica ZZT230 or ZZT231 - simply message us This email address is being protected from spambots. You need JavaScript enabled to view it. . Our roll centre adjusters come complete with bolts, washers and nuts for simple fitment.

We ship worldwide weekly - no problems for overseas buyers.

$165.00

Celica T160 series Side indicator lenses

Pair of side indicator lenses to suit your T160 series Celica 1985-1989 build. 

Models covered include AT160 ST160 ST161 ST162 ST163 ST164. 

Replaces original Koito lenses. Lenses are available in original Amber or custom colours of Clear or Smoke. Coloured bulbs are supplied with clear or smoke lenses. 

These are made using the highest calibre manufacturing techniques and fit with precision. As a custom product (clear and smoke lenses) vendor does not warrant regulatory compliance.

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Shipping worldwide weekly - no problems for international buyers.

UK and European Buyers please make contact before purchasing.

$80.00
* amber clear smoke or jett:

Toyota Head Lamp and Grille Fastener Clip Pack

Headlamp and grille (fender) fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Carina, Publica, Land Cruiser and Hilux

These clips are used to fasten inner guards (fenders) to the outer guard and are screwed into place. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • ST160, ST162, AT160, ST163, ST164 and ST165

Toyota Corolla

  • KE10, KE11, KE15, KE16, KE17 and KE18
  • KE20, KE25, TE21, TE25, TE27 and TE26
  • KE30, KE35, KE50, KE55, TE31, TE51, KE36 and KE38
  • TE72
  • AE90, AE91, AE92 and EE90

 Toyota Land Cruiser

  • FJ40, FJ45, FJ43, FJ47, BJ40, BJ42, BJ45, BJ43, BJ44, BJ47, HJ40, HJ45, HJ43 and HJ47

Toyota Publica 

  • KP30, KP31, KP36V, KP37V, KP38, KP39 and KP50

 Toyota Carina

  • TA10
  • KA67
  • ET176V, AT170, AT175, ST170, ST170G, CT170, CT170G and CT176V

Toyota Cressida

  • TX30, RX30, RX32, RX35, MX30, MX35, MX40, MX41, MX45, MX32 and MX36
  • TX67V, SX60, RX63, RX60, GX61, GX60G, GX61, MX61, MX62, MX63, LX60, LX67V and LX65

 Toyota Hilux and Toyota Surf

  • All models to N190 series

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Bonnet Hood Insulation Clip Pack

Toyota bonnet (hood) insulation clip pack to suit various Toyota models - Celica, Corolla, Hilux, Surf, Prado, Soarer and Supra

These clips have a 24.5mm head are used with a 7mm hole and are plastic push in trim clips used to fasten the under bonnet (hood) insulation sheet. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • SZZT230 and ZZT231

Toyota Supra

  • JZA80

Toyota Corolla

  • AE101, CE101, CE102, CE105, CE107
  • AE111, AE115, CDE110, CE113, CE116, WZE110, ZZE11, ZZE112
  • CDE120, NDE120, ZRE120, ZZE120, ZZE121 and ZZE122

Toyota Hilux / Surf

  • GRN210, GRN215, KDN215, KZN215, RZN210, RZN215, TRN210, TRN215, UZN210, UZN215, VZN210 and VZN215

Toyota Prado

  • GRJ120, GRJ121, GRJ125, KDJ120, KDJ121, KDJ125, KZJ120, LJ120, LJ125, RZJ120, RZJ125, TRJ120, TRJ125, VZJ120, VZJ121 and VZJ125

 Toyota Soarer

  • JZZ30, JZZ31, UZZ30, UZZ31, UZZ32
  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Celica T200 Series Front Indicator Lenses 1993 to 1995

Reproduction amber or custom clear or smoke front indicator lenses for your sixth generation T200 series Toyota Celica.

Suited to all Toyota Celica T200 series built between 1993 to 1995 these lenses are wonderful in original amber or custom clear or smoke reproductions made to the highest quality and replace original part 20-347.

These lenses are fitted to the front bumper of the AT200 ST202 ST203 and ST204 Toyota Celica and replace the traditionally clear type lenses. Clear and smoke lense must be used with an amber bulb (supplied). Vendor does not warrant regulatory compliance.

Please note: these lenses do not suit ST205 and some late build Australian delivery cars - see separate listings for these parts.

Complete your 'sixth gen' Toyota Celica project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

UK and Europe customers please contact Toyota Heritage prior to ordering.

Shipping worldwide weekly - no problems for overseas buyers.

$145.00
* amber clear smoke or jett:

Toyota Celica ST165 7mm lead kit for GT-Four

Genuine 7mm Eagle Leads to suit your ST165 Toyota Celica built from 1986 to 1989.

Suits 2.0L 3S-GTE DOHC 16V Fuel Injection Turbo models of the ST165 Toyota Celica GT-Four and also referred to as Turbo All-Trac (USA).

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$81.55
2 In Stock

Toyota Bonnet (Hood) Weather Strip Clips Pack

Radiator support to bonnet (hood) rubber seal fastener clip pack to suit various Toyota models - Celica, Corolla, Corona, Cressida, Land Cruiser, MR2, Hilux, Starlet and Supra

These clips are used to fasten the rubber strip that sits between the bonnet (hood) underside and top of the radiator support panel to reduce wind and water coming into the under bonnet (hood) area. 

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica

  • TA40, TA45, TA41, TA42, TA46, TA47, RA40, RA45, RA55, RA46, RA42 and RA43
  • TA60, TA61, AA63, TA62, TA63, TA64, SA60, RA63, RA60, RA6, SA63, RA64 and RA65
  • ST160, ST162, AT160, ST163, ST164 and ST165
  • ST180, ST184 and ST185
  • ST200, ST202, ST203, ST204 and ST205

Toyota Corolla

  • All models from KE30 through to ZWE182

 Toyota Corona

  • All models from ST140 through to ST215

Toyota Cressida

  • All models from MX32 through to RX81

Toyota Hilux and Surf

  • All models from LN130 through to VZN185

Toyota Land Cruiser

  • All models from BJ60 through HZJ105

Toyota MR2

  • AW10 andAW11
  • ZZW30

 Toyota Supra

  • GA70, JZA70 and MA70
  • JZA80

Toyota Starlet

  • KP60, KP61

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Scuff Plate Door Moulding and Flare Clip Pack

Toyota screw mounting grommet clip pack to suit various Toyota models - Celica, Corolla, Carina, Caldina, Land Cruiser, Prado, Hilux, Surf and  Soarer

These clips have a 12.8m top head diameter on a 17.5mm head diameter, 12mm fitted length and fit to a 8.5mm hole are a plastic push in trim clip used to fasten door scuff plates, door opening trim moulding, carpet edges, exterior door moulds and flares, plastic panels on top of front guards under bonnet, mudguards, spoilers, boot trays

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica 

  • AT200, ST202, ST203, ST204 and ST205
  • ZZT230 and ZZT231

Toyota Corolla

  • AE110, AE111, AE112, AE114, AE115, CDE110, CE110, CE113, CE114, CE116, EE110, EE111, WZE110, ZZE111, ZZE112
  • CDE120, NDE120, NZE120, ZRE120, ZZE120, ZZE121, ZZE122, ZZE123
  • ZZE130
  • AZE141, CE140, NZE141, ZRE141, ZRE142, ZRE143, ZZE141, ZZE142
  • ADE150, NDE150, NRE150, ZRE151, ZRE152, ZRE153 and ZZE150

Toyota Carina

  • AT210, AT211, AT212, CT210, CT211, CT215, CT216 and ST215

Toyota Caldina

  • AT211, CT216, ST210 and ST215

Toyota Land Cruiser

  • GRJ200, URJ200, URJ202, UZJ200 and VDJ200

Toyota Prado

  • KDJ90, KDJ95, KZJ90, KZJ95, LJ95, RZJ90, RZJ95, VZJ90 and VZJ95

Toyota Hilux and Surf

  • GRN280, GRN285, TRN280 and TRN285

Toyota Soarer

  • UZZ40

Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Celica ST205 GT-Four Front Indicator Lenses

Reproduction amber or custom clear or smoke front indicator lenses for your sixth generation ST205 GT-Four Toyota Celica.

Suited to all Toyota Celica ST205 built between 1994 to 1995 these lenses are wonderful custom clear or smoke reproductions made to the highest quality and replace original part 20-352.

These lenses are fitted to the front bumper of the ST205 Toyota Celica GT-Four and replace the traditionally amber type lenses. Clear and smoke lense must be used with an amber bulb (supplied). Vendor does not warrant regulatory compliance.

Complete your 'GT-Four' sixth generation Toyota Celica project in style - whether its a retro-ride, drift car, daily driver, restoration project or even a race car!

These lenses have been manufactured using precision tooling to produce a high quality faithful reproduction item.

UK and Europe customers please contact Toyota Heritage prior to ordering.

Shipping worldwide weekly - no problems for overseas buyers.

$160.00
* amber clear smoke or jett:

Toyota Celica ST185 7mm lead kit for GT-Four

Genuine 7mm Eagle Leads to suit your ST185 Toyota Celica built from 1989 to July 1991.

Suits 2.0L 3S-GTE DOHC 16V Fuel Injection Turbo models of the ST185 Toyota Celica GT-Four, GT-Four V, GT-Four A, Turbo 4WD, GT-Four RC, GT-Four Grp A Rallye and also referred to as Turbo All-Trac (USA).

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$88.15
2 In Stock

Toyota Celica ST165 Floor Mat Set

Front and rear floor carpet set for your ST165 Toyota Celica GT-Four.

Suited to all RHD Toyota Celica ST165 GT-Four and All-Trac built between 1985 to 1989 our carpet floor mats are patterned off the floor of an original ST165 GT-Four, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are four mats included in the set and this includes the two front foot well mats and the two rear floor well mats. 

Displayed here in Blue with a grey edge binding on the passnger side mats and in Charcoal with grey edge binding for the driver side mats, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fourth gen' Toyota Celica ST165 project in style - whether its a daily driver, offroader or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$140.00
* Carpet Pile:

* Carpet Colour:

Toyota Front and Rear Bumper Bar 9mm Clips Pack

Bumper cover fastener clip pack to suit various Toyota models - Celica, MR2, Supra and Soarer.

These clips are used to fasten front and rear bumpers into place. 

These are a push in clip that expands when the 9mm head is pushed in and holds firmly in place.

Can be purchased in packs of 10 or 20 - use the drop down menu.

Suits the following models:

Toyota Celica (front bumper)

  • AT180, ST182, ST183, ST184 and ST185

Toyota MR2 (front bumper)

  • SW20 and SW21

 Toyota Supra (front and rear bumper)

  • JZA80

Toyota Soarer (front and rear bumper)

  • JZZ30, JZZ31, UZZ30, UZZ31 and UZZ32

 Our clips are European made and are well fitting suited to restorers and repairers.

Shipping worldwide weekly - no problems for overseas buyers.

 

$15.00
* Pack size:

Toyota Celica ST205 GT-Four Fog Light Delete Grilles

Reproduction fog light delete grilles for your sixth generation ST205 GT-Four Toyota Celica.

Suited to all Toyota Celica ST205 built between 1994 to 1995 these fog light delete grille reproductions with a look and feel of the OEM parts and are made to the highest quality and replace original part 53113-20180 (LHS) and 53112-20240 (RHS).

These grilles are no longer available (NLA) as an OEM parts and are fitted to the front bumper of the ST205 Toyota Celica GT-Four and replace the factory fog lights, usually for the purpose of rally competition and to provide greater airflow.

Complete your 'GT-Four' sixth generation Toyota Celica project in style - whether its a retro-ride, daily driver, restoration project or even a race car!

These grilles have been manufactured using precision tooling to produce a high quality faithful reproduction item.

Shipping worldwide weekly - no problems for overseas buyers.

$250.00

Toyota Celica ST185 5mm lead kit for GT-Four

Genuine 5mm Eagle Leads to suit your ST185 Toyota Celica built from August 1991 to 1993

Suits 2.0L 3S-GTE DOHC 16V Fuel Injection Turbo models of the ST185 Toyota Celica GT-Four, GT-Four V, GT-Four A, Turbo 4WD, GT-Four RC, GT-Four Grp A Rallye and also referred to as Turbo All-Trac (USA).

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$134.55
2 In Stock

Toyota Celica T180 Series Floor Mat Set

Front and rear floor carpet set for your T180 series fifth generation Toyota Celica.

Suited to all RHD Toyota Celica T180 series such as AT180, ST180, ST182, ST183 and ST184 built between 1989 to 1993 our carpet floor mats are patterned off the floor of an original ST183, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

There are four mats included in the set and this includes the two front foot well mats and the two rear floor well mats. 

Displayed here in Black with a black edge binding on the passnger side mats and in Red with red edge binding for the driver side mats, these mats provide a look that has an OEM look and feel.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'fifth gen' Toyota Celica T180 series project in style - whether its a daily driver, offroader or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$140.00
* Carpet Pile:

* Carpet Colour:

Toyota Celica ZZT230 Floor Mat Set RHD

Front and rear floor carpet set for your seventh generation T230 series Toyota Celica.

Suited to all RHD Toyota Celica ZZT230 and ZZT231 built between 1999 to 2006 our carpet floor mats are styled off the OEM factory original mats, are well fitting and made in Australia to the highest quality with a non-slip foam backing.

Available in loop or plush pile and fourteen different colours. Just use the drop down menus to select pile and colour.

NOTE: Colour swatches shown are on plush pile carpet and may differ slightly on loop.

Complete your 'seventh gen' Toyota Celica project in style - whether its a retro-ride, drift car, daily driver or restoration project.

Shipping worldwide weekly - no problems for overseas buyers.

$140.00
* Carpet Colour:

* Carpet Pile:

Celica T200 series Rear third brake light lenses 1993 to 1995

Single lense in smoke, clear or factory red coloured brake light lense (third brake light) to suit your ST200 series Celica.

Models covered include AT200 ST202 ST203 ST204 and ST205.

These are made using the highest calibre manufacturing techniques and fit with precision.

Complete your retro ride, rally machine, daily driver, track car or JDM special with that custom touch.

Smoke and clear lenses must be used with red coloured bulbs. Vendor does not warrant regulatory compliance.

$60.00
* lense colour options:

Toyota Celica ST205 5mm lead kit for GT-Four

Genuine 5mm Eagle Leads to suit your ST205 Toyota Celica built from February 1994 to June 1999

Suits 2.0L 3S-GTE DOHC 16V Fuel Injection Turbo models of the ST205 Toyota Celica GT-Four.

General description:

 A premium quality ignition lead set specifically designed as an upmarket replacement for OHC motors fitted with Boot and Tube component technology.

Being Eliminator series, they are fitted with 1300 ohms per metre Ferrite Spiral Core conductor which by induction design delivers peak voltage to the plugs ensuring almost complete combustion for super quick starts and smooth running.

Tested to ISO 3808 Standards.

Features - Boot & Tube Assembly Features*

  • Hi-temp Silicone Well Cover boot
  • PVT insulator tube insulates plug terminal to prevent high voltage crossover
  • Hi-temp Silicone Tip Seal.

Terminal Features

  • High Memory spring steel retaining clip for positive terminal locking at all RPM'S.
  • Extra long .51mm base offers minimal heat transfer from plug tip to inner conductor. This ensures maximum cable life.
  • Triple cable retaining ribs and "W" shaped crimp ensure superior cable retention.

 Cable Features

  • Simply "the best" Stainless Steel wound Ferrite coated Spiral Core conductor yields ultra low resistance ensuring peak voltage delivery to the spark plugs.
  • High Dielectric Silicone inner jacket.
  • Technologically advanced nylon tape adds tensile strength.
  • 260°C High Temp. modified Silicone outer jacket ensures complete protection against heat and engine bay contaminants.

Shipping wordlwide weekly - no problems for overseas buyers.

$134.55
2 In Stock